Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[therock11]

effective hashrate has been greatly reduced with latest update. anyone else?

Yes, my RX580s are now 18Mh/s and my RX480s are now 14MH/s.  This is the same on 3 of my rigs.  I looking into how to revert the update or I'll blow these away and rebuild on a linux distro or Windows 7.

Updated: I went to settings and recovery and rolled back to the previous update.  I'm back to 33Mh/s and 30Mh/s.  Thanks Microsoft for your amazing fail.

[atomant]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

[user1988]

I have a six 470 rig, modded BIOS with Claymore 11.2 and the following config:

-dcri 1
-cclock 1240
-mclock 2200
-cvddc 950
-tt 72
-fanmin 50
-fanmax 90
 
Does anyone know why I'm getting about 27MH/s for the 5 GPUs and 32MH/s for 1 of them?
The GPUs are identical and bought on the same batch.

what driver version?

[therock11]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

Looking at the specs I'd think your power usage to mining efficiency wouldn't be worth it.

[Omg9500]

Does claymore Dual miner work with these cards when installed with n NVidea 1050Ti?
https://www.ebay.com/itm/Nvidia-Tesla-on-Mars-m2090-gpu-6-gb-gddr5-384-bit-/183114411755?_trksid=p2385738.m4383.l4275.c10

I don't think so... https://forum.ethereum.org/discussion/2815/mining-with-a-tesla-m2090

[Hodlmyhand]

Thanks for 11.3 claymore, much more stable than 11.2 so far, and the auto dcri option is very nice. Are you working on auto dcri option for dual mining? Also can I request more dual mine algorithms?  thanks

[Omg9500]

effective hashrate has been greatly reduced with latest update. anyone else?

Yes, my RX580s are now 18Mh/s and my RX480s are now 14MH/s.  This is the same on 3 of my rigs.  I looking into how to revert the update or I'll blow these away and rebuild on a linux distro or Windows 7.

Updated: I went to settings and recovery and rolled back to the previous update.  I'm back to 33Mh/s and 30Mh/s.  Thanks Microsoft for your amazing fail.

Probably it's not the windows update but windows update updated you GPU driver. You can prevent this by running gpedit.msc administrative tools and windows update .... https://www.itechtics.com/disable-automatic-driver-updates-windows/

[peterboy1]

effective hashrate has been greatly reduced with latest update. anyone else?

Yes, my RX580s are now 18Mh/s and my RX480s are now 14MH/s.  This is the same on 3 of my rigs.  I looking into how to revert the update or I'll blow these away and rebuild on a linux distro or Windows 7.

Updated: I went to settings and recovery and rolled back to the previous update.  I'm back to 33Mh/s and 30Mh/s.  Thanks Microsoft for your amazing fail.

you must be talking about reported/client's hashrate, not the effective/pools calculation hashrate which is the most important.

i was talking about average EFFECTIVE hashrate which has decreased much in this version.

[janding]

effective hashrate has been greatly reduced with latest update. anyone else?

Yes, my RX580s are now 18Mh/s and my RX480s are now 14MH/s.  This is the same on 3 of my rigs.  I looking into how to revert the update or I'll blow these away and rebuild on a linux distro or Windows 7.

Updated: I went to settings and recovery and rolled back to the previous update.  I'm back to 33Mh/s and 30Mh/s.  Thanks Microsoft for your amazing fail.

you must be talking about reported/client's hashrate, not the effective/pools calculation hashrate which is the most important.

i was talking about average EFFECTIVE hashrate which has decreased much in this version.

After a windows update I uninstalled the AMD drivers and installed them again.
That fixed all the issues with hash rates that dropped.

[whoismoses]

11.3 helps RX550 cards a lot. Among all my cards I have 18 Asus RX 550 4GB. Each card is up 1.5-2.5 MH/s...

It is like adding a whole another RX 580!

[Claymore]

Hello, @Claymore! Since it's getting warmer outside it would be fine to consider -ttli affect while rebooting by -minspeed. E.g. "-minspeed 10250" will reboot rig slower than 250Mh, but only if any of GPUs are throttling.

PS My previous problem is still there. New miner instance cannot take 3333 port after restarting in reboot.bat without actual rig reboot. Different rigs, different Windows installations, days of waiting - socket is busy anyway after "-minspeed" restarting. Also I noticed if I close miner with "X" button above, it shows "Quit, please wait..." for a while, after this sockets close immidiately. Maybe if you could execute procedures hidden in this "please wait" sign after minspeed detection, it will solve the problem?

Ok I will check it.

PPS -dcri autodetection is great! Got +12 Mh from my rigs. Thanks! ) BTW, is best dcri different for different DAGs? Last year I was measuring best dcri for each GPU by myself, but yesterday realized all of them are wrong...

I did not test it, but for recent drivers it must not depend on DAG much.

[Ursul0]

@Claymore can you maybe query system for the driver version and show it in Remote Manager ?

[bithead007]

Ok I will check it.

<snip>

I did not test it, but for recent drivers it must not depend on DAG much.

Thanks for the update. I'm noticing crashes. RX570 and 1060 card are all that are installed, dual mining DCR, mem clock only 2000 on the 570. This was stable on 10.5.

09:36:56:840   77c   ETH: GPU0 15.884 Mh/s, GPU1 19.378 Mh/s

<snip>

09:38:50:088   77c   ETH: GPU0 0.000 Mh/s, GPU1 19.371 Mh/s
09:39:04:762   f0   WATCHDOG: GPU 0 hangs in OpenCL call, exit

Windows 10, 18.1.1 AMD driver

CJ

[Teress]

@Claymore
I switched to linux version of Claymore some time ago. But am I blind or why is linux version storing in log files less info then win version? For example one of my rigs is rebooting. I want to analyze problem reading logs. On windows version I saw in that case for example "Gpu0 failed..". On linux I can see only "NVML: cannot get fan speed, error 999" but NO info about which gpu crashed the driver. Can anybody point me right direction?
Thanks a lot...

BTW: v11.2 & v11.3 is crashing after a while all my Nvidia rigs, previous version was absolutelly stable.

[Frippster]

11.3 crashed all three rigs within 5 minutes. 11.2 has been perfectly stable between my 72 hour reboots.

[andrenym00]

Which driver is better,  blockchain driver or current amd driver set to compute?

[Vann]

The current AMD drivers in compute mode are optimized for Windows 10 v1709 FCU. Those are the fastest drivers to use with RX 570/580 cards. The only reason to use the blockchain drivers on Windows v1709 with RX 570/580's is some old miners like SGminer don't work with the latest drivers.

[big al]

11.3 crashed all three rigs within 5 minutes. 11.2 has been perfectly stable between my 72 hour reboots.

I'm finding the same. 11.3 is faster but less stable. If I slow down the cards a bit it becomes stable. But that negates the speed gain.

[Ursul0]

GPU hangs are most often from to a high overclock, especially on the memory or too much undervolt for that card. Sometimes draining all the power from the capacitors also helps reset the GPU's and risers after a crash. Shutdown down the rig, cutoff the power to the PSU with the switch on the back and press the power button to drain all the power. Then after 1-2 minutes turn the rig back on.

yep. this can be healthy and helpful sometimes. you don't need to wait 1 minute though:)
As for the 32MH - I'd guess it's rx*80 Polaris, so you should expect it to be unstable at this rate
in any case just as undervolt could cause it the stock voltages could be also too much for the card to handle, so just start from lower mem overclock

[cryptmaniac123]

Hello,

i am mining with claymoreminer ETH only, mining works fine but i do not receive the ETH in my wallet.

Do you see any mistakes here?

BR Cryptmaniac

https://ibb.co/cUE2k7
https://ibb.co/ks8ZyS

Most pools have a min. payout hurdle.... I am on Nanopool and there for example the min. payout is 0.2 ETH. Could that be the reason?

sounds like that could be the reason! i did not think of that, ill look into it. Thanks !!