iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
|
February 14, 2018, 12:33:10 PM |
|
Hi, Claymore!
I think, it will be useful to add a scheduler to reboot the rig (exec the reboot.bat), not miner in "-r" option. For example -r -180 - to execute reboot.bat if something wrong with gpus and to restart miner every 180 mins.
Or just to add one another option for calling reboot.bat.
I got some usb watchdog dongles from Aliexpress. They have an associated program and watch the miner and the gpus. If the miner, computer or a gpu stops working the dongle will reboot the computer. I have not installed them yet but on a test bench they checked out okay. Just search Aliexpress or eBay for "usb watchdog." I'm using USB WatchDogs, however I need to reboot the rig even if all it's ok every hour, for example. I believe it would increase my share count.
|
|
|
|
DJMorgan
Newbie
Offline
Activity: 27
Merit: 0
|
|
February 14, 2018, 01:08:42 PM |
|
Hi, Claymore,
There are plans for the second coin, and the removal is no longer relevant for mining on the GPU? ASIC evil...
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
February 14, 2018, 01:36:21 PM Last edit: February 14, 2018, 04:43:38 PM by RuMiner |
|
Hi, @Claymore! I'm parsing last log file in reboot.bat and if it was a minspeed reboot, I'm just restarting miner instead of reboot. So a small bug was found: after restarting miner cannot aquire management port because it is taken by previous miner instance. It repeats this constantly until next reboot: server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attempt in 20sec...
If old miner instance is closed, OS must close its socket. So probably old miner is still running. Or you use Linux... I know it must ( but such behaviour only when miner is closed by minspeed. if I close it manually and start again, everything is ok netstat shows sockets are in CLOSE_WAIT state. I think, it will be useful to add a scheduler to reboot the rig (exec the reboot.bat), not miner in "-r" option. For example -r -180 - to execute reboot.bat if something wrong with gpus and to restart miner every 180 mins. rtfm ) -r option already DOES work as you described: -r 180 reboots in case of gpu fail OR in 180 minutes
|
|
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
|
February 14, 2018, 01:50:38 PM |
|
I think, it will be useful to add a scheduler to reboot the rig (exec the reboot.bat), not miner in "-r" option. For example -r -180 - to execute reboot.bat if something wrong with gpus and to restart miner every 180 mins. rtfm ) -r option already DOES work as you described: -r 180 reboots in case of gpu fail OR in 180 minutes [/quote] RuMiner means "Russian" miner? Read this manual more attentively. "Restart miner" not equal "Execute reboot.bat". I need to reboot my rig, not miner, every hour, for example
|
|
|
|
Kent2
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 14, 2018, 02:39:23 PM |
|
i ve been mining in this nlpool.nl for hours it finds a bunch of shares but still have 0 balance... why?
nlpool.nl scam i mine this pool 12 hours and my balance 0. 30 gh/s
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
February 14, 2018, 02:49:33 PM |
|
I think, it will be useful to add a scheduler to reboot the rig (exec the reboot.bat), not miner in "-r" option. For example -r -180 - to execute reboot.bat if something wrong with gpus and to restart miner every 180 mins. rtfm ) -r option already DOES work as you described: -r 180 reboots in case of gpu fail OR in 180 minutes RuMiner means "Russian" miner? Read this manual more attentively. "Restart miner" not equal "Execute reboot.bat". I need to reboot my rig, not miner, every hour, for example If you're using windows, use the taskscheduler to run specific batch file or exe file then create scripts that command your Computer to restart.
|
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
|
February 14, 2018, 03:29:13 PM |
|
I think, it will be useful to add a scheduler to reboot the rig (exec the reboot.bat), not miner in "-r" option. For example -r -180 - to execute reboot.bat if something wrong with gpus and to restart miner every 180 mins. rtfm ) -r option already DOES work as you described: -r 180 reboots in case of gpu fail OR in 180 minutes RuMiner means "Russian" miner? Read this manual more attentively. "Restart miner" not equal "Execute reboot.bat". I need to reboot my rig, not miner, every hour, for example If you're using windows, use the taskscheduler to run specific batch file or exe file then create scripts that command your Computer to restart. agree... after all, I've used "shutdown" command from file "reboot.bat" (there is an example in readme.txt) with 10800 sec. delay in my case. I've inserted this command in my start.bat, which one is in autostart folder. but option in miner would be more comfortable
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 14, 2018, 03:49:23 PM |
|
Hey guys! I'm super new to the forum, thanks for all the great help!
I just downloaded Claymore V11 and im getting a virus: Win32/CoinMiner!bit is it a false negative? I downloaded it from the main page. Just wanted to check.
Thanks again guys
Happened to me as well.. however I am not new to mining stuff, previous versions of Claymore never showed virus alert Me too. Cause AMD Wattman problem and mining rig hangup after boot. Now back to 10.6. I think all of you lads should make a group, discuss it internally and decide whether to continue with mining.
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 14, 2018, 04:03:51 PM |
|
Hi,
anyone willing to share which coin they are mining using Keccak, with cards stats and so on? Thx
|
|
|
|
mshordja
|
|
February 14, 2018, 04:56:18 PM |
|
Hi,
anyone willing to share which coin they are mining using Keccak, with cards stats and so on? Thx
please share the script used and the pool and also the hashrate you are getting
|
|
|
|
heavyarms1912
|
|
February 14, 2018, 05:01:37 PM |
|
Hi,
anyone willing to share which coin they are mining using Keccak, with cards stats and so on? Thx
please share the script used and the pool and also the hashrate you are getting Or perhaps just hand over your wallet address and ask to mine for you
|
|
|
|
KryptoCH
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 14, 2018, 05:13:19 PM |
|
I can't download v11. Each dwl tells me there is a trojan backdoor inside the zip. It did not tell me that for all previous versions.
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 14, 2018, 05:17:09 PM |
|
Hi,
anyone willing to share which coin they are mining using Keccak, with cards stats and so on? Thx
I'm mining Ethereum Classic + SmartCash and my GPU is a 8GB PowerColor Radeon RX 480 Red Devil. ETC: etc.ethermine.orgSMART: pool-eu.smartcash.ccMy batch-file for ETC+SMART:setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x83428c64cF11af81d8a1e70c48bb375172062F69.worker1 -epsw x -dpool stratum+tcp://pool-eu.smartcash.cc:3333 -dwal xuNsh1ne.worker1 -dcoin keccak -dpsw password -dcri 7 -mport 0 ETH: ethermine.orgSMART: pool-eu.smartcash.ccMy batch-file for ETH+SMART:setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.worker1 -epsw x -dpool stratum+tcp://pool-eu.smartcash.cc:3333 -dwal xuNsh1ne.worker1 -dcoin keccak -dpsw password -dcri 7 -mport 0 You'll have to find the best -dcri value for yourself. pool-eu.smartcash.cc requires registration! Will look into the coin, thx! What hashrate are you getting? About the -dcri, correct, I use -ethi 15 and -dcri 60 for mining XVG and I am on a Sapphire Pulse RX 580 8Gb, getting 30.5 Mh/s and 1800 Mh/s.
|
|
|
|
akuci
|
|
February 14, 2018, 06:20:10 PM |
|
Any good XVG pool ? On calculator i see i can get 8 XVG per hour but with antminepool and unimining theat is science fictionn i will be lucky to get only 4 (half) It's not the pools fault, but the diff is rising fast. Don't use mining calculators like What To Mine.
|
|
|
|
wgestickley
Newbie
Offline
Activity: 76
Merit: 0
|
|
February 14, 2018, 06:27:14 PM |
|
Any good XVG pool ? On calculator i see i can get 8 XVG per hour but with antminepool and unimining theat is science fictionn i will be lucky to get only 4 (half) Mining XVG at ahashpool.com with 15300 MH/s. The earned BTC are as calculated.
|
|
|
|
terremoto1998
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 14, 2018, 07:13:59 PM |
|
hi guys, i have 2 problem: 1) i set my exodus eth wallet in my bat file but he wont work. i got some total share but i cant see my wallet on nanopool site and i dont see any money on my exodus wallet. 2) i have got a rx 480 nitro+ but when i mining i got only 18 mh/s. if i do benchmark test i can do 23 mh/s. i know, i dont have modded bios but some people can mine more then 18 mh/s with stock bios. i tried play with dcri and the best settings is: -dcri 120 (18 mh/s) thank you so much at all
this is my settings: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x6eC1A07Ce71e1585B1CD39B40C226622cAa39bc5.(my name)/(my email) -epsw x -mode 1 -ftime 10 -dcri 120
C:\Users\TUTTI\Downloads\Claymore.s.Dual.Ethereum.Decred_Siacoin_Lbry_Pascal.AMD.NVIDIA.GPU.Miner.v10.0>EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x6eC1A07Ce71e1585B1CD39B40C226622cAa39bc5.(there is my name here)/(and my mail here) -epsw x -mode 1 -ftime 10 -dcri 120
╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.0 ║ ╚════════════════════════════════════════════════════════════════╝
ETH: 5 pools are specified Main Ethereum pool is eth-eu1.nanopool.org:9999 At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing...
AMD Cards available: 1 GPU #0: Ellesmere, 8192 MB available, 36 compute units GPU #0 recognized as Radeon RX 480/580 POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <217.182.66.25> port 9999 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) ETH: Authorized Setting DAG epoch #169... Setting DAG epoch #169 for GPU0 Create GPU buffer for GPU0 GPU0 DAG creation time - 6074 ms Setting DAG epoch #169 for GPU0 done ETH: 02/14/18-19:56:53 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.770 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 17.770 Mh/s GPU0 t=55C fan=25% ETH: 02/14/18-19:57:12 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.684 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 17.684 Mh/s ETH: 02/14/18-19:57:26 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.765 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 17.765 Mh/s ETH: 02/14/18-19:57:28 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.747 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 17.747 Mh/s ETH: 02/14/18-19:57:32 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.760 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 17.760 Mh/s GPU0 t=60C fan=25% ETH: 02/14/18-19:58:03 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.790 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01 ETH: GPU0 17.790 Mh/s GPU0 t=63C fan=25% ETH: 02/14/18-19:58:31 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.755 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01 ETH: GPU0 17.755 Mh/s GPU0 t=65C fan=25% ETH: 02/14/18-19:58:41 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.741 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:02 ETH: GPU0 17.741 Mh/s ETH: 02/14/18-19:59:02 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.783 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:02 ETH: GPU0 17.783 Mh/s GPU0 t=67C fan=25% GPU0 t=68C fan=23% ETH: 02/14/18-19:59:36 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.790 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:02 ETH: GPU0 17.790 Mh/s GPU0 t=70C fan=22% ETH: 02/14/18-20:00:30 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.760 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:03 ETH: GPU0 17.760 Mh/s
GPU #0: Ellesmere, 8192 MB available, 36 compute units ETH - Total Speed: 17.760 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:03 ETH: GPU0 17.760 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 17.729 Mh/s Pool switches: ETH - 0, DCR - 0 Current ETH share target: 0x000000006df37f67 (diff: 10000MH), epoch 169(2.32GB) GPU0 t=71C fan=22%
ETH: 02/14/18-20:00:30 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.760 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:03 ETH: GPU0 17.760 Mh/s ETH: 02/14/18-20:00:37 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.773 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04 ETH: GPU0 17.773 Mh/s ETH: 02/14/18-20:00:40 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 17.512 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04 ETH: GPU0 17.512 Mh/s
|
|
|
|
whoismoses
Member
Offline
Activity: 247
Merit: 59
|
|
February 14, 2018, 07:45:31 PM |
|
Any good XVG pool ? On calculator i see i can get 8 XVG per hour but with antminepool and unimining theat is science fictionn i will be lucky to get only 4 (half) It's not the pools fault, but the diff is rising fast. Don't use mining calculators like What To Mine. You can use what to mine, just adjust the difficulty to be correct.
|
|
|
|
Teress
|
|
February 14, 2018, 07:55:38 PM |
|
Nobody answered me so I have to ask again: Can someone explain me please, why I CAN mine with my GTX 1060s 3GB without problem ETH but CAN'T mine ETC due to DAG creation error? Does they have not same size DAG?
|
|
|
|
BSAlex
Member
Offline
Activity: 239
Merit: 10
|
|
February 14, 2018, 07:58:46 PM |
|
Nobody answered me so I have to ask again: Can someone explain me please, why I CAN mine with my GTX 1060s 3GB without problem ETH but CAN'T mine ETC due to DAG creation error? Does they have not same size DAG?
Yes, they have not the same DAG file size. Please check https://investoon.com/tools/dag_size for details.
|
|
|
|
|