Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Piskeante]

ETH total hashrate has dropped from 184.000 GH/s to 176.000GH/s almost due to this.

[1714302286]

1714302286

[1714302286]

1714302286

[1714302286]

1714302286

[1714302286]

1714302286

[1714302286]

1714302286

[1714302286]

1714302286

[bategojko74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

Some of your Claymore parameters are not the same in PM. Run PM from command prompt and you will see the wrong parameters.

I try t run almost without extra parameter(I used pheonix in my 5700rig) but tis hsow stop working after start to received job from pool.

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x40455f7e79561a01091a66260360c4361e4c3525.Rig001 -log 0 -hstats 2

Works perfectly for me on one RX 5700 XT with your parameters (copy/pasting directly your command line). PM version 5.0e & 5.1b. AMD Drivers version Adrenalin 19.9.1.

[Metroid]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

Strange, I tested right now, rx 470 4gb still working without any problems. Windows 10 update 2004, dag 350 3.73gb.

ETH total hashrate has dropped from 184.000 GH/s to 176.000GH/s almost due to this.

based on lows and highs, nothing significantly changed yet, 160 th/s at moment.

[Piskeante]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

Strange, I tested right now, rx 470 4gb still working without any problems. Windows 10 update 2004, dag 350 3.73gb.

Hey! how is it going Metroid??

The issue is that the card takes too long to add the dag file to the memory. Normally, dag is created in about 10.000ms (about 10 seconds), 7 seconds most part of the time. But since dag 350, my 2 RX 580 4gb need about 70 seconds. Since watchdog reinitialises the miner at 60 seconds, the cards stay offline all the time and the miners stop working.

The work-around is to disable Watchdog or add more time to reiniciate the mining rig after a GPU fails as it's detected by WD.

[Piskeante]

But the weirdest thing of all, is that i knew something was not working because the miner continued showing the normal hashrate but the power consumption of the mining rig was with 2 gpus less. (from 815W from the wall to 640).

Also when i saw the shares of all cards, I knew something was not going well because the two RX 580 4gb had about 400 shares less than the 8gb cards. So, don't trust the info shown by the miner. Watch the power consumption instead!!!

[dadobane]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

Some of your Claymore parameters are not the same in PM. Run PM from command prompt and you will see the wrong parameters.

I try t run almost without extra parameter(I used pheonix in my 5700rig) but tis hsow stop working after start to received job from pool.

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x40455f7e79561a01091a66260360c4361e4c3525.Rig001 -log 0 -hstats 2

Works perfectly for me on one RX 5700 XT with your parameters (copy/pasting directly your command line). PM version 5.0e & 5.1b. AMD Drivers version Adrenalin 19.9.1.

I have a similar problem with 4gb cards too. PhoenixMiner closes as soon as it reads the cards. I don't know if it's a problem with the driver or a command?

[Metroid]

Hey! how is it going Metroid??

The issue is that the card takes too long to add the dag file to the memory. Normally, dag is created in about 10.000ms (about 10 seconds), 7 seconds most part of the time. But since dag 350, my 2 RX 580 4gb need about 70 seconds. Since watchdog reinitialises the miner at 60 seconds, the cards stay offline all the time and the miners stop working.

The work-around is to disable Watchdog or add more time to reiniciate the mining rig after a GPU fails as it's detected by WD.

Pretty good, thanks.

At least the dag is being processed. Usually miners leave the pc without a single restart for days. Well, as far as I can tell and I don't use watchdog at all, the rx 470 worked without any problems and it did not take long to start mining.  All I saw was a normal behaviour. If dag 350 is causing issues for some people, imagine what will happen in a week or so with dag 351.

I guess to some people will be a good time to think about moving 4gb cards to something else.

[fatmeto]

I HAVE 3 RIG  THE mainboards is same Gigabyte 970a-DS3p  
3x5=15  Rx470 Asus Mining edition have
Today I see no hashrate all rig. I restarted Same Problem. I edit my miner config And added -eres 1  rigs start to work. But I see 3 rig Same Problem GPU0  is not start to work hashrate Still 0 mh. But in device manager No problem.
I think this problem Claymore's script problem. I try reinstall driver and patch same Problem Still.
Any Solution ?

[asarhad]

I have 6x580 4GB and miner is currently just currently works but first GPU0 needs much more time and after that its 0mhs.
Sometimes it happens that some other card also mines with 0.0 but in most cases, GPU0 is not mining.

Anyone idea why just first one?
Regards

[patthara74]

I have 6x580 4GB and miner is currently just currently works but first GPU0 needs much more time and after that its 0mhs.
Sometimes it happens that some other card also mines with 0.0 but in most cases, GPU0 is not mining.

Anyone idea why just first one?
Regards

change -eres 0 to 1 may be need to change to use vga onboard to connect with monitor

[fatmeto]

I find but not solution. İf Your Mainboard have vga output Mining Gpu0 is working.
If u dont have Mainboard vga output Gpu0 is not working. this is too bad

[asarhad]

I have 6x580 4GB and miner is currently just currently works but first GPU0 needs much more time and after that its 0mhs.
Sometimes it happens that some other card also mines with 0.0 but in most cases, GPU0 is not mining.

Anyone idea why just first one?
Regards

change -eres 0 to 1 may be need to change to use vga onboard to connect with monitor

already switched today to 1 and gpu0 - 0mhs rest working as regularly.

I find but not solution. İf Your Mainboard have vga output Mining Gpu0 is working.
If u dont have Mainboard vga output Gpu0 is not working. this is too bad

i am not sure i followed, sorry can you clarify pls?


also if this helps in debug, 2y ago...i tried enabling internal graphic, but whatever i did, nothing was showing on monitor, so i switched to GPU0 then year ago, it stoped working on DVI ...and nothing helped back then...so i switched to HDMI and that works. I tried ofc switching cables and cards, but same result.

[dorek_k]

I have troube with my rig 6x RX580 , last night hashrate is down 180 mhs to 10 mhs
https://imgur.com/a/5UhEUmj
can u help me? Thx

[Kumic]

On one rig with 4 rx470 cards, SSD got messed up. I have put it in the other rig to test it if it's working (previously I pulled out the working SSD from this rig).
SSD is ok, but now both of my rigs are messed up. I have reinstalled drivers (tried different versions too), I updated windows (it's windows 7), but I only get 10mh on ethereum per card.

I have another rig with the same 4 rx470 cards and is working fine. I used Macrium to clone this SSD from good rig to two that are not working properly.
I got the same result (10mh per card). I don't know what happened.

I use win 7, tried with some other miners, but I got the same results. Virtual memory is good.

Should I try to BIOS MOD the cards or something?

[baybeelucas]

I have troube with my rig 6x RX580 , last night hashrate is down 180 mhs to 10 mhs
https://imgur.com/a/5UhEUmj
can u help me? Thx

what is the temperature of the card?

[dorek_k]

I have troube with my rig 6x RX580 , last night hashrate is down 180 mhs to 10 mhs
https://imgur.com/a/5UhEUmj
can u help me? Thx

what is the temperature of the card?

no more than 50-60 degrees at 30mhs/card

[anteminer]

Well guys I'm posting this here since I'm affected too by what it seems is a common problem now on 4gb cards.

I have one rig with 6x 4gb rx570 AMD cards + 1 rx 570 8gb card.

A couple days ago my mining rig started showing 0.0mhs on GPU0  . Since that happened I did some testing to see if I had a bad riser but I didn't , so I just forgot about the problem and mined without a card thinking it was just broken but in the meanwhile I noticed I had high stale shares mining without the card, didn't know why.
Today I monitored the rig and had only about 58mhs of hashing power { I believe I just had the 8gb card working plus another}. I DDU'ed the drivers couple of times, checked risers and the lastresort thing ive done is a fresh install of windows 10 with no success on reviving the other cards.
To my surprise I decided to download Claymore again just in case and went to this thread to see that is a common problem. I hope it gets solved and someone shares the solution, in the meanwhile I'm thinking of mining another algorithm.

[DrG]

4GB cards can only hold 4GB of data in VRAM.

Windows 10 pulls about 270MB for the drivers and overhead.
ETH DAG is now in excess of 3.73GB

So the only systems working are ones with the oldest (smaller) drivers and maybe rigs running Win 7.

All 4GB cards will be kicked off ETH within a couple of DAGs. It's time to sell them while prices are high or enjoy gaming.

[phucktum]

Hi everybody, I have a problem to need help

I have a rig with 5 cards: 1 x rx580.8g + 4x rx570.4g .
It has gone well in win10 64 with driver 20.4.2-may25.Hash : 32,2, 30.2, 30.2, 29.7, 29.3 => total 151.7 Mh/s

After I have uninstalled by ddu program the driver, I install driver 20.7.1-july9.
But the Claymore causes Windows system crashed. Is it not running with driver 20.7.1 ?

[RedRockMining]

Anyone else using Claymore on Ethos? Was working fine 6 months ago, but now I am getting only 8 mhs per 8GB RX480 instead of around 26-28 mhs. I have the latest Ethos version 1.3.3 and have run Ethos's update-miners command which seemed to work.