minerstat: mining OS + ASIC monitoring + Windows mining

[coinscrow]

Tomorrow i publish an update. v2.7.1
- EWBF Consumption & Hashrate / GPU
- EWBF Reduced sync time
- OHM Config Patch (Miner log file doesn't exits)

Screenshots below.

Currently i'm working on the v2.8
- Imroved Algo (Able to switch between dual mining and another clients) Example ETH+DCR < ZCL, than the miner start mine zcl
and bug fixes.


If anyone have a client related issue, tell me and i fix it maybe today.

[MTJ151]

All i get is:

  (ERROR)(16/04/2017)  You must use the default api port at your miner.
  (ERROR)(16/04/2017)  Miner log file doesn't exits.
  (ERROR)(16/04/2017)  HardwareMonitor log file doesn't exits.

Over and over!

Assuming this is at least partly due to the bug mentioned in above post?

[cryptominer420]

Yes, In the task bar click Open Hardware monitor and under options or something you have to run the webserver something caused the config to change and stopped the web server.

[coinscrow]

v2.7.1 BETA
- Corrects an issue when OHM default config file was lost.
- Ewbf-ZEC sync time reduced.
- Ewbf-ZEC now shows actual consumption and hashrate / gpu.
- Network Traffic calculation improved.
- Claymore-Dual Updated to v9.1

Download link on the same place: Software >> Node (Website)
Or AutoUpdate PRESS "A" Button on the node, or run AutoUpdate from Remote Commands.

What's next? v2.8
- Improved Algo
- Config Editor -> You be able to use Varibles on another clients like: claymore-zec. (Auto Replace Pool/Wallet)
- and another improvements..

[soothaa]

Good morning. This tool looks amazing and I will probably become a donater as soon as I test it out.

I am having a bit of trouble with my initial setup. I have "MINER = algo" set in my config file, I have my addresses and pools set up correctly for MUISC (as it is currently the best as per the algo) (addr: 0xd9c2df92fa5397d5ec0296656b7584a01a295a82, pool: musicoin.nomnom.technology:9999)

I have set the CLAYMORE-DUAL miner set to:
-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-ethi 7

When I start the node, I get an error in claymore that "(1_COIN_POOL), no port specified!"
What am I configuring wrong to get auto pool switched?

[coinscrow]

Good morning. This tool looks amazing and I will probably become a donater as soon as I test it out.

I am having a bit of trouble with my initial setup. I have "MINER = algo" set in my config file, I have my addresses and pools set up correctly for MUISC (as it is currently the best as per the algo) (addr: 0xd9c2df92fa5397d5ec0296656b7584a01a295a82, pool: musicoin.nomnom.technology:9999)

I have set the CLAYMORE-DUAL miner set to:
-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-ethi 7

When I start the node, I get an error in claymore that "(1_COIN_POOL), no port specified!"
What am I configuring wrong to get auto pool switched?

read the faq about how to set up auto switch.
you need to use the full cfg:

Code:

-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-dpool (2_COIN_POOL)
-dcoin (2_COIN)
-dwal (2_COIN_ADDRESS)
-dpsw x
-mode 0
-dcri (DCRI)
#-allcoins 1

line-by-line copy this. you can add your own parameters after here.
if you want to fix a varible delete (VARIBLE) and use just text.

in algo setting fill in all of your details if you see your most profitable coin in the website the algo will work

[soothaa]

Ohhh I see, I must keep the dual options listed even if I don't plan on using them. Working now, thank you!

[Ambros]

I modified the config.txt file properly and I also changed claymore config on the server, but when I run node.exe I receive this error:

Open HardwareMonitor on task bar. Options...

There is a file with this name in the files downloaded, what should I do?

[coinscrow]

I modified the config.txt file properly and I also changed claymore config on the server, but when I run node.exe I receive this error:

Open HardwareMonitor on task bar. Options...

There is a file with this name in the files downloaded, what should I do?

reopen node.exe
 open hardware monitor on the task bar and enable web server.

maybe firewall or antivirus block ohm to create web server.

[Starsky886]

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

[coinscrow]

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

enable cpu listing on the dashboard.

zdash, zcl, zec is not supported in algo right now.
i mentioned upper 2-3 post it comes with the next version

[Starsky886]

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

enable cpu listing on the dashboard.

zdash, zcl, zec is not supported in algo right now.
i mentioned upper 2-3 post it comes with the next version

Still, all my miners have this error, they are idle and cpu listing is enabled

[Jamievs]

I have been fiddling around with minerstat and I more and more like it.

I noticed that the dashboard is not updating properly when one rig is being taken offline when the rigs are dual mining. I added a screenshot where you can see rig1 has been offline for 12 hours but it is not properly updating the "dual mined" coin.

http://imgur.com/a/ZIGwj

I also wanted to say awesome job coinscrow! Can't wait for additionial features on both the website and the app.

[coinscrow]

I have been fiddling around with minerstat and I more and more like it.

I noticed that the dashboard is not updating properly when one rig is being taken offline when the rigs are dual mining. I added a screenshot where you can see rig1 has been offline for 12 hours but it is not properly updating the "dual mined" coin.

http://imgur.com/a/ZIGwj

I also wanted to say awesome job coinscrow! Can't wait for additionial features on both the website and the app.

so the problem is dual mined coin stayed in the stats when it is offline?

[Jamievs]

I have been fiddling around with minerstat and I more and more like it.

I noticed that the dashboard is not updating properly when one rig is being taken offline when the rigs are dual mining. I added a screenshot where you can see rig1 has been offline for 12 hours but it is not properly updating the "dual mined" coin.

http://imgur.com/a/ZIGwj

I also wanted to say awesome job coinscrow! Can't wait for additionial features on both the website and the app.

so the problem is dual mined coin stayed in the stats when it is offline?

Yeah it is!

[soothaa]

I'm enjoying your tool quite a lot! The only thing keeping me from becoming a donator is I am awaiting the Linux client (as only one of my rigs is running Windows.) Do you have a guess when you might start testing it? I would be happy to be a beta tester and provide verbose feedback, I'm a sysadmin with 10 years IT experience.

[coinscrow]

I'm enjoying your tool quite a lot! The only thing keeping me from becoming a donator is I am awaiting the Linux client (as only one of my rigs is running Windows.) Do you have a guess when you might start testing it? I would be happy to be a beta tester and provide verbose feedback, I'm a sysadmin with 10 years IT experience.

after the next release v2.8, i will start to work on linux.
I will post about alpha test, i provide little number of test users. 20-30 max.

[soothaa]

Cool, thanks for the info!

[Starsky886]

I'm enjoying your tool quite a lot! The only thing keeping me from becoming a donator is I am awaiting the Linux client (as only one of my rigs is running Windows.) Do you have a guess when you might start testing it? I would be happy to be a beta tester and provide verbose feedback, I'm a sysadmin with 10 years IT experience.

after the next release v2.8, i will start to work on linux.
I will post about alpha test, i provide little number of test users. 20-30 max.

When do you think you'll be able to release v2.8?

[olaf_d]

after the next release v2.8, i will start to work on linux.
I will post about alpha test, i provide little number of test users. 20-30 max.

I would be interested in testing the Linux builds