insaniak
|
|
May 23, 2017, 05:04:20 PM |
|
Thank you got it working. One thing I noticed is that when ever node fetches data and updates the status. I get a drop in hashrate from one of my GPUS. Is this normal?
|
|
|
|
FRK
Newbie
Offline
Activity: 15
Merit: 0
|
|
May 23, 2017, 06:40:54 PM |
|
i missed that. i wrote aperum instead of alpereum now will work. Thanks, it works
|
|
|
|
Bones972
|
|
May 23, 2017, 09:02:06 PM Last edit: May 23, 2017, 10:25:26 PM by Bones972 |
|
@Coincrow Did you see that Claymore just released
ZCash miner V12.5
- added support for latest ZCash forks. - improved fans management for latest drivers and Polaris cards. - added "-mpsw" option. - added shares-per-GPU statistics when "s" key is pressed. - Included EthMan v3.0 which supports passwords and email notifications
They just delayed ZEN for 7 days... Not released till the 31st now.
|
|
|
|
cryptominer420
|
|
May 24, 2017, 11:37:37 PM |
|
Also New Dual Miner.
|
╖╖ ╓╖╖ ╖╖╖ ,╖╖─ ║▒▒ ╢▒╜,@╢▒▒▒║ ╓╣╢╝║║*║▒╢ ╢▒╣ ]▒▒,╢▒╢`]▒▒░╢▒▒╖ ╢▒ ╥╢▒▒▒╢ @║╝╢▒╜ ▒▒Ñ╝╝╢▒▒]▒▒` ]▒▒`╙╢╢║║╖┌▒▒╣▒╢▒▒ ╢▒╝▒▒▒ ╢▒╜║▒╢▒▒╢▒░║▒╜ ╥╥─╙╢╢╢║N ║▒╢ ▒▒╜ ║▒▒╢▒▒╣╓╢@@╢╢╜║▒║ ╢▒╜ ║▒▒ ╙▒▒,║▒▒░▒╣ ║▒▒║ ╢▒▒╢▒▒▒»@╢@@╢╜
|
. | | |
█ █ █ █ █ █ █ █ █ █ █ █ | | | | | |
█ █ █ █ █ █ █ █ █ █ █ █ |
|
|
|
Bones972
|
|
May 25, 2017, 07:41:25 AM |
|
@Coincrow Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update
Any word on updating the new Claymore miners? Keep up the good work!! Bones972
|
|
|
|
coinscrow (OP)
|
|
May 25, 2017, 09:31:32 AM |
|
@Coincrow Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update
Any word on updating the new Claymore miners? Keep up the good work!! Bones972
i update the v2.9 package with new claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated) but everyone can easily update the clients. EXAMPLE: clients/claymore-zec -> delete all of contents after put all of new files what you downloaded from claymore. thats all
|
|
|
|
Bones972
|
|
May 25, 2017, 12:56:16 PM |
|
@Coincrow Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update
Any word on updating the new Claymore miners? Keep up the good work!! Bones972
i update the v2.9 package with new claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated) but everyone can easily update the clients. EXAMPLE: clients/claymore-zec -> delete all of contents after put all of new files what you downloaded from claymore. thats all Sweet! I did not know I could do that! I am still learning all the in's and out's of this program. Thanks!!
|
|
|
|
SoeLak
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 26, 2017, 02:14:06 AM |
|
@Coincrow Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update
Any word on updating the new Claymore miners? Keep up the good work!! Bones972
i update the v2.9 package with new claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated) but everyone can easily update the clients. EXAMPLE: clients/claymore-zec -> delete all of contents after put all of new files what you downloaded from claymore. thats all Sweet! I did not know I could do that! I am still learning all the in's and out's of this program. Thanks!! delete all of contents except "start.bat"
|
|
|
|
Herdirfauzi
|
|
May 26, 2017, 03:29:12 AM |
|
I will try tonight on Android, thank you very much
|
|
|
|
insaniak
|
|
May 26, 2017, 03:49:35 AM |
|
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
|
|
|
|
magnoman
Newbie
Offline
Activity: 33
Merit: 0
|
|
May 26, 2017, 08:18:53 PM |
|
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners. Can you give more specifics? - Which miner(s) are exhibiting this behavior? - How much is the hash rate dropping? - What GPU(s) and CPU do you have? - Are you CPU mining as well? - Windows version? If we can replicate the issue then perhaps we can help find a cause and solution.
|
|
|
|
insaniak
|
|
May 26, 2017, 08:37:19 PM |
|
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners. Can you give more specifics? - Which miner(s) are exhibiting this behavior? - How much is the hash rate dropping? - What GPU(s) and CPU do you have? - Are you CPU mining as well? - Windows version? If we can replicate the issue then perhaps we can help find a cause and solution. Eth only miner I get 30-31 mh/s and once it starts syncing my gpu 2 drops to 28 mh/s then when it's done syncing goes back up to 30-31. Running 6 gpus. Rx 580s 8gbs CPU intel 3900 I think? The one that works with z170a Not CPU mining 4gb ram Windows 10 64 bit
|
|
|
|
magnoman
Newbie
Offline
Activity: 33
Merit: 0
|
|
May 26, 2017, 08:44:33 PM |
|
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners. Can you give more specifics? - Which miner(s) are exhibiting this behavior? - How much is the hash rate dropping? - What GPU(s) and CPU do you have? - Are you CPU mining as well? - Windows version? If we can replicate the issue then perhaps we can help find a cause and solution. Eth only miner I get 30-31 mh/s and once it starts syncing my gpu 2 drops to 28 mh/s then when it's done syncing goes back up to 30-31. Running 6 gpus. Rx 580s 8gbs CPU intel 3900 I think? The one that works with z170a Not CPU mining 4gb ram Windows 10 64 bit Are you running a monitor on the rig? If so, is it plugged into the 2nd GPU or are you using the onboard graphics? (On board graphics might be worth a try - that should take a little bit of load off the GPU)
|
|
|
|
justmecoining
Newbie
Offline
Activity: 17
Merit: 0
|
|
May 26, 2017, 11:33:08 PM |
|
how about a self hosted version with autoupgrade feature for installing on a CenOS server? for the TIER 5 Plan? That is why I think paying for a self hosted version would be a good option. I would do the following as you had 4 donator levels... Free: 5 rigs statistics shown Donator (Tier 1): 10 Rig statistics Donator (Tier 2): 15 Rig statistics Donator (Tier 3): 20 Rig statistics Donator (Tier 4): License for Self Hosted Or a 1 time $100 cost.
Donator Levels are calculated using the average donation for the last 3 months.
Very good idea. I do this.
|
|
|
|
insaniak
|
|
May 27, 2017, 03:33:55 AM |
|
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners. Can you give more specifics? - Which miner(s) are exhibiting this behavior? - How much is the hash rate dropping? - What GPU(s) and CPU do you have? - Are you CPU mining as well? - Windows version? If we can replicate the issue then perhaps we can help find a cause and solution. Eth only miner I get 30-31 mh/s and once it starts syncing my gpu 2 drops to 28 mh/s then when it's done syncing goes back up to 30-31. Running 6 gpus. Rx 580s 8gbs CPU intel 3900 I think? The one that works with z170a Not CPU mining 4gb ram Windows 10 64 bit Are you running a monitor on the rig? If so, is it plugged into the 2nd GPU or are you using the onboard graphics? (On board graphics might be worth a try - that should take a little bit of load off the GPU) It's on gpu 2nd slot I'll try the on board. Thanks
|
|
|
|
coinscrow (OP)
|
|
May 27, 2017, 04:15:08 AM |
|
how about a self hosted version with autoupgrade feature for installing on a CenOS server? for the TIER 5 Plan? That is why I think paying for a self hosted version would be a good option. I would do the following as you had 4 donator levels... Free: 5 rigs statistics shown Donator (Tier 1): 10 Rig statistics Donator (Tier 2): 15 Rig statistics Donator (Tier 3): 20 Rig statistics Donator (Tier 4): License for Self Hosted Or a 1 time $100 cost.
Donator Levels are calculated using the average donation for the last 3 months.
Very good idea. I do this. this post was very long time, the website enveloped a lot. maximum you can use your server as load balancer. (The node push the miner data to your server, and the website fetch from your server) theres a lot of cron job, cleaning, apis, get statistics, coin prices, currencies value EUR, USD.. etc.. I'm currently not thinking about a self-hosted version. There's an api for that, but currently at test mode. It will be more detailed with different examples. https://minerstat.com/api/ACCESSKEY
|
|
|
|
funnyboy027
Newbie
Offline
Activity: 32
Merit: 0
|
|
May 27, 2017, 02:01:26 PM |
|
i'm using ewbf for mining zcash and monitoring by using your tool. sometime it reported 0 sol but when i check, it still running normally. and how to restart pc if ewbf miner got problem. thank you
|
|
|
|
yoonline
Newbie
Offline
Activity: 51
Merit: 0
|
|
May 28, 2017, 04:38:38 AM |
|
|
|
|
|
Jamievs
|
|
May 28, 2017, 04:55:39 AM |
|
---------------------------------------------------------------------------
Website & APP Improvements: - New coins for CCMINER: VTC, DGB, MONA, GRS - Ewbf & CCMINER now display pool name. - Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH. - The website prepared for ZENCASH. (ewbf, claymore miners) - Some UI improvements. - Packaged Server Code -> Faster load
Perhaps I am completely blind but where do I add hashrates / pools / wallets for these coins? Also add Siacoin as solomining option, it is really profitable atm! Any idea when the new coins will be pushed live Coinscrow?
|
|
|
|
pornluver
|
|
May 28, 2017, 01:21:25 PM |
|
all my rigs have same watttool number
0,6,12,18,24,40
your watttool settings numbered
0,6,12,18,24,30
why?
what are you guys' number for watttool number?
|
|
|
|
|