PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[91to]

answer please! I have 1080 ti and 1070. The drivers are the newest. PhoenixMiner 5.5c. mining ether
on phoenix I have:
1080 ti - 15 mh / s
1070 - 17 mh / s

on gminer I have:
1080 ti - 36 mh / s
1070 - 28 mh / s

  The overclocking is the same, the temperatures are the same. Why is phoenix showing so little?

[1714172841]

1714172841

[1714172841]

1714172841

[1714172841]

1714172841

[Vann]

answer please! I have 1080 ti and 1070. The drivers are the newest. PhoenixMiner 5.5c. mining ether
on phoenix I have:
1080 ti - 15 mh / s
1070 - 17 mh / s

on gminer I have:
1080 ti - 36 mh / s
1070 - 28 mh / s

  The overclocking is the same, the temperatures are the same. Why is phoenix showing so little?

ETH Only I get ~28 MH/s 1070, ~36 MH/s 1080 and ~45 MH/s 1080 Ti.

PhonenixMiner v5.5c Windows 10 20H2 Nvidia GeForce 461.72 Driver

Code:

2021.02.28:12:35:16.317: main *** 5:27 *** 2/28 12:35 **************************************
2021.02.28:12:35:16.317: main Eth: Mining ETH on ssl://us1.ethermine.org:5555 for 5:27
2021.02.28:12:35:16.317: main Eth: Accepted shares 497 (0 stales), rejected shares 0 (0 stales)
2021.02.28:12:35:16.317: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% 
2021.02.28:12:35:16.317: main Eth: Maximum difficulty of found share: 5824.8 GH (!)
2021.02.28:12:35:16.317: main Eth: Average speed (5 min): 108.993 MH/s
2021.02.28:12:35:16.317: main Eth: Effective speed: 101.25 MH/s; at pool: 101.25 MH/s
2021.02.28:12:35:16.317: main  
2021.02.28:12:35:16.949: main Eth speed: 109.115 MH/s, shares: 497/0/0, time: 5:27
2021.02.28:12:35:16.949: main GPUs: 1: 28.121 MH/s (134) 2: 44.985 MH/s (194) 3: 36.009 MH/s (169)

MSI Afterburner Overclock Settings:

Code:

GPU 1: Zotac AMP! Extreme 8G GTX 1070 - 70% Power Limit +100 Core +300 Memory 92 Temp Limit Fan Speed 55%
GPU 2: MSI Duke 11G OC GTX 1080 Ti - 88% Power Limit +135 Core +500 Memory 90 Temp Limit Fan Speed 83%
GPU 3: MSI Gaming X 8G GTX 1080 - 65% Power Limit +100 Core +700 Memory 92 Temp Limit Fan Speed 85%

PhoenixMiner config.txt:

Code:

-coin eth
-ptimeout 15
-ftimeout 300
-tt -55,-83,-85
-tstop 78
-r 0
-gser 1
-eres 5
-logdir logs\
-mode 1
-nvidia
-mi 14,14,14
-gpus 123
-nvKernel 3
-nvdo 1
-nvNew 1
-gbase 1
-nvmem 1,2,2
-vmr 12,12,100
-straps 0,2,2

[sushmee]

Hey there, getting these errors with some NVIDIA rigs, some insight could be good. Thanks!

Code:

2021.03.01:09:45:47.397: GPU5 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.397: GPU5 GPU5 search error: the launch timed out and was terminated
2021.03.01:09:45:47.408: GPU6 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.408: GPU6 GPU6 search error: the launch timed out and was terminated
2021.03.01:09:45:47.425: GPU3 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.425: GPU3 GPU3 search error: the launch timed out and was terminated
2021.03.01:09:45:47.427: GPU4 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.427: GPU4 GPU4 search error: the launch timed out and was terminated
2021.03.01:09:45:47.442: wdog Fatal error detected. Restarting.
2021.03.01:09:45:47.455: GPU1 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.455: GPU1 GPU1 search error: the launch timed out and was terminated
2021.03.01:09:45:47.455: GPU2 CUDA error in CudaProgram.cu:465 : the launch timed out and was terminated (702)
2021.03.01:09:45:47.455: GPU2 GPU2 search error: the launch timed out and was terminated

Clocks:

Core: +90
Memory: +580
PL: 140

Cards: GeForce GTX 1070 8119 MB · Gigabyte Micron GDDR5 · 86.04.50.00.7A

Edit: Also getting some rejected shares

[Permonik]

Hi guys,
What are your h/s for RX6800 ?

Thanks

[Littlegrand]

Having trouble getting my rx 570 8gb Pulse with Samsung memory stable.  Using Windows 10

Use 1 click BIOS editor, flash,  then Phoenixminer to change clocks/volts

I have tried 1130-1150/850 and 2050-2100/860 and none of the times stay stable with a Blue screen hanging in the driver. All seem to run 5-60 minutes.

Any suggestions?  Never had a 570 outside of these paramaters unstable  unless going higher but 1130/2050 are my beginning settings.

Thanks

start with 950-960mv then slowly decrease to see which card crashing

Funny it wasnt this card thats why nothing worked, when I installed this card, it was another card I had to cut back on the memory that had been mining fine. Strange

[Littlegrand]

I have a 5700 xt on the way....

With 5700 xt, Do you still use the 1 click bios editor and then change core/mem in phoenix?  And can someone post some starting numbers for MSI RX 5700 XT 8 gig

Thanks

[Kiawpqe]

Hi guys,
What are your h/s for RX6800 ?

Thanks

new rig

*** 0:06 *** 3/1 21:55 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:06
Available GPUs for mining:
GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU2: AMD Radeon RX 5700 XT (pcie 12), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU3: AMD Radeon RX 6800 (pcie 16), OpenCL 2.0, 16 GB VRAM, 30 CUs
GPU4: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: AMD Radeon RX 5700 XT (pcie 21), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU6: AMD Radeon RX 5700 XT (pcie 24), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU7: AMD Radeon RX 5700 XT (pcie 27), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU1: 52C 0% 92W, GPU2: 45C 58% 132W, GPU3: 57C 25% 177W, GPU4: 46C 68% 84W, GPU5: 44C 55% 99W, GPU6: 45C 56% 89W, GPU7: 45C 58% 90W
GPU1: cclock 1162 MHz, cvddc 756 mV, mclock 1812 MHz, mvddc 850 mV, Tj 57C, Tmem 80C
GPU2: cclock 1212 MHz, cvddc 756 mV, mclock 1846 MHz, mvddc 850 mV, Tj 55C, Tmem 82C
GPU3: cclock 1242 MHz, cvddc 793 mV, mclock 2088 MHz, Tj 61C
GPU4: cclock 1150 MHz, cvddc 862 mV, mclock 2100 MHz
GPU5: cclock 1225 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 53C, Tmem 72C
GPU6: cclock 1227 MHz, cvddc 756 mV, mclock 1802 MHz, mvddc 850 mV, Tj 52C, Tmem 64C
GPU7: cclock 1223 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 50C, Tmem 70C
GPUs power: 762.8 W; cost: 2.47 USD/day
Current -gt 21,38,203,66,36,25,37
Eth: Accepted shares 36 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 995.0 GH (!)
Eth: Average speed (5 min): 361.339 MH/s
Eth: Effective speed: 351.22 MH/s; at pool: 351.22 MH/s
Eth: Estimated income: 30.62 USD/day

Eth: New job #512792a9 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 361.331 MH/s, shares: 36/0/0, time: 0:06
GPUs: 1: 51.839 MH/s (3) 2: 53.500 MH/s ( 3: 62.940 MH/s (6) 4: 31.745 MH/s (3) 5: 54.474 MH/s ( 6: 52.408 MH/s (3) 7: 54.425 MH/s (5)


i config now and try

[waywoos]

I have a 5700 xt on the way....

With 5700 xt, Do you still use the 1 click bios editor and then change core/mem in phoenix?  And can someone post some starting numbers for MSI RX 5700 XT 8 gig

Thanks

no its more involved now days.
you have to manually do it. look on youtube on the red panda mining channel. the specialize in the 5700xt

[Denton_Miner]

Hello everyone,

I also wanted to try ETH-mining and ordered some new hardware. New mainboard, new CPU and also a new graphics card:

Operating system: Windows 10 Pro, 64-bit
DirectX version: 12.0
GPU processor: GeForce RTX 2070 SUPER
Driver version: 461.72
Driver type: DCH
Direct3D function level: 12_1
CUDA cores: 2560
Core clock: 1905 MHz
Memory data rate: 14.00 Gbps
Memory interface: 256-bit
Memory bandwidth: 448.06 GB/s
Total available graphics memory: 16347 MB
Dedicated video memory: 8192 MB GDDR6
System video memory: 0 MB
Free system memory: 8155 MB
Video-BIOS-Version: 90.04.86.00.47
IRQ: Not used
Bus: PCI Express x16 Gen3
Device ID: 10DE 1E84 87271043
Part number: G180 0012

However, when I start the Phoenixminer the following error message appears:

https://i.ibb.co/J3z18hH/Unbenannt.png

I have already set changes to all possible settings.   Firewall and Windows Defender is disabled.

Does anyone here have a tip for what I could try to get the Phoenixminer to start?

Thank you very much.  

[VRMdude]

Any chance of a -maxRigSpeed option as a flakey gpu occasionally gives a million gazzillion hash rate that wdog doesnt act on and the pool boots the entire rig for it until a manual miner restart. That particular GPU will work fine without reboot. Have been fine tuning that GPU for a few weeks it has no orderly sense its one with Gremlins, have to run it steady very delicate thing....

Thanks

[rboer]

HI,

i tried searching for an answer but did not found so sorry if it was already addressed.
I am running straps but i want to use Afterburn again to OC my Nvidia cards but afterburn is grey out or disabled any ideas?
Using 5.5c

thanks

[cirlama]

Hi all,
do you know why PhoenixMiner creates a file called "PhoenixMiner.Vexe" in the same directory (with windows process)?

[Kiawpqe]

NEW RIG
WORKING FINE


Eth speed: 378.901 MH/s, shares: 96/0/0, time: 0:17
GPUs: 1: 52.756 MH/s (15) 2: 58.111 MH/s (19) 3: 63.077 MH/s (10) 4: 32.360 MH/s (1) 5: 58.432 MH/s (18) 6: 55.747 MH/s (18) 7: 58.418 MH/s (15)

*** 0:17 *** 3/2 20:38 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:17
Available GPUs for mining:
GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU2: AMD Radeon RX 5700 XT (pcie 12), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU3: AMD Radeon RX 6800 (pcie 16), OpenCL 2.0, 16 GB VRAM, 30 CUs
GPU4: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: AMD Radeon RX 5700 XT (pcie 21), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU6: AMD Radeon RX 5700 XT (pcie 24), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU7: AMD Radeon RX 5700 XT (pcie 27), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU1: 44C 60% 94W, GPU2: 44C 77% 138W, GPU3: 59C 24% 183W, GPU4: 49C 51% 85W, GPU5: 44C 66% 101W, GPU6: 45C 62% 91W, GPU7: 45C 65% 93W
GPU1: cclock 1257 MHz, cvddc 756 mV, mclock 1814 MHz, mvddc 850 mV, Tj 49C, Tmem 74C
GPU2: cclock 1330 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 54C, Tmem 84C
GPU3: cclock 1244 MHz, cvddc 793 mV, mclock 2092 MHz, Tj 63C
GPU4: cclock 1190 MHz, cvddc 862 mV, mclock 2110 MHz
GPU5: cclock 1344 MHz, cvddc 756 mV, mclock 1890 MHz, mvddc 850 mV, Tj 52C, Tmem 72C
GPU6: cclock 1280 MHz, cvddc 762 mV, mclock 1802 MHz, mvddc 850 mV, Tj 52C, Tmem 64C
GPU7: cclock 1344 MHz, cvddc 756 mV, mclock 1890 MHz, mvddc 850 mV, Tj 51C, Tmem 74C
GPUs power: 784.7 W; cost: 2.54 USD/day
Current -gt 36,37,15,45,29,43,42
Eth: Accepted shares 96 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 367.3 GH (!)
Eth: Average speed (5 min): 378.895 MH/s
Eth: Effective speed: 372.45 MH/s; at pool: 372.45 MH/s
Eth: Estimated income: 34.14 USD/day

[stoniestfool]

You may want to know the eth core devs are pushing through a reward reduction. Those profits will not last.
Congratulations on the rig and welcome to the community.

https://bitcointalk.org/index.php?topic=5321264.0

[radic]

I get "Unable to set memory clock delta to -1000 MHz -error -137"

I am running Evga 3090 with latest nvidia driver 461.72. I am trying to quit using MSI afterburner and insted I am trying to use the phoenixminer overclock settings int the .bat file for my gpu. As a starter I just simply tried to set the memory clock to some not that high value like "-mclock 400".

The DAG file loads, everything runs just fine but my MH/s speed is the basic one and from time to time I get this error "Unable to set memory clock delta to -1000 Mhz - error -137"

*using phoenixminer 5.5c

[rockert]

Does anyone know why my rtx 3080 is limited by the miner to a power always of 200w and although the memory goes up nothing happens

https://i.ibb.co/x8qYVBJ/Sin-t-tulo.png

[der][meister]

RTX 3000 series   fellows..


Log file  is here   https://pastebin.com/ffxrrWED

i guess you overclock before DAG creation with a external tool like MSI afterburner, there's the problem, you need to use phoenixminers overclocking feature to make -mcdag 1 work!!

BTW you posted your -cdmpass Avraham20 you need to change that!?

Run phoenixminer as admin, edit your .bat with the following, this is from a Rig with 6x 3070 and 1x 1080, btw straps only works on 1080(ti)s!!:

cd /d %~dp0
PhoenixMiner.exe -proto 2 -coin eth -cdm 0 -pidle 108 -prate 0.18 -nvidia -nvNew 1 -resetoc -fcm 1 -tmax 68 -tt 59 -mcdag 1 -powlim 1:-48,2:-45,3:-45,4:-38,5:-50,6:-46,7:-46 -cclock 1:-680,2:-680,3:-680,4:140,5:-680,6:-680,7:-680 -mclock 1:+1300,2:+1300,3:+1300,4:+1000,5:+1300,6:+1300,7:+1300 -straps 1:0,2:0,3:0,4:2,5:0,6:0,7:0 -gt 0 -mi 12 -tstop 70 -tstart 50

[remauto1187ma]

Does PhoenixMiner have a GPU max limit? I have a RX580 rig that I cant get to run more than 8 GPU's. It will either immediately shutdown after you start the miner and close the window or it will fail to load the dag file and restart the miner after showing a specific GPU error. All RX 580 cards are 8gb and the O/S is Windows 7.

[miner29]

Does PhoenixMiner have a GPU max limit? I have a RX580 rig that I cant get to run more than 8 GPU's. It will either immediately shutdown after you start the miner and close the window or it will fail to load the dag file and restart the miner after showing a specific GPU error. All RX 580 cards are 8gb and the O/S is Windows 7.

Miner supports as many gpus as you can get working.  Ive got some 13 gpus rigs on it no issue.
I will add im on linux so maybe a windows (or windows 7) thing.

[Arkas221]

Hi all, I have been mining until yesterday with some  Quadro's P2200 5GB cards but having issues lately.
I was using -rvram -1 -eres 0  but not working anymore.

CUDA error in CudaProgram.cu:204 : out of memory (2)
Failed to initialize search buffers: out of memory

Thanks in advance for any advice!