|
erk
|
|
November 04, 2013, 11:22:32 PM |
|
TEX is crap, read my complaints in the TEK thread. The client source doesn't compile so you have to use a binary you don't have the source for. ZET is better than TEK but ZET was a massive insta-mine so it has no credibility, hence little price support. All the newer sha256 alt-coins are crap so far. I am still looking for one. Only TRC and PPC are viable atm. both have reasonably high difficultly compared to the other sha256 alts.
|
|
|
|
|
tk1337
|
|
November 05, 2013, 01:11:31 AM |
|
looks nice, may pick one up from you here shortly.
|
|
|
|
gramma
|
|
November 05, 2013, 01:19:34 AM |
|
|
BTC: 1MrNRPo7p8DEyxn87c9BCGwrbatBQeCHc1
|
|
|
techman05
|
|
November 05, 2013, 01:30:46 AM |
|
TEX is crap, read my complaints in the TEK thread. The client source doesn't compile so you have to use a binary you don't have the source for. ZET is better than TEK but ZET was a massive insta-mine so it has no credibility, hence little price support. All the newer sha256 alt-coins are crap so far. I am still looking for one. Only TRC and PPC are viable atm. both have reasonably high difficultly compared to the other sha256 alts. I'm kinda bs'ing with unObtainium coins. They have no trade value yet but it seemed new enough to put it on the side with low priority and see if anything kicks with it. I grump every time I see adult swim say someone had bitcoins at the beginning and hit big accidentally. If you've got better post in the drillBit forums and we'll see if we can get a leg up on some new coin. I almost want batch 3 to have at least one chip to run litecoins ,just so I can scare someone with a 2Gig Hash chip.
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
November 05, 2013, 01:56:08 AM |
|
Hey Spotwood. I have one of your cases for my Bitfury. Very well made. I am trying to picture how my unit would fit on these though. I have 8 boards. So I have 2 mini planes and then a double scroll holding the two mini planes. Are your cases built for that?
|
|
|
|
Spotswood
|
|
November 05, 2013, 03:24:19 AM |
|
Hey Spotwood. I have one of your cases for my Bitfury. Very well made. I am trying to picture how my unit would fit on these though. I have 8 boards. So I have 2 mini planes and then a double scroll holding the two mini planes. Are your cases built for that? The basic design can be adapted to almost all of the custom ASIC boards. I don't have a model of the double scroll, but here's a quick mockup of what a case for it might look like: (Imagine the double scroll mounted to the two support beams.) What is the layout of the mounting holes on the double scroll?
|
|
|
|
Barntech (OP)
|
|
November 05, 2013, 05:13:06 AM |
|
Hey all. So a quick note on the cases. Firstly thanks Spotswood for your work. Looking really nice. There is one element of the design that is a little counter-intuitive, which is that the fins of the heatsinks go length ways down the boards. (we couldn't find sideways ones at short notice). This means that the best fan position is going to be directly on top of the miniplane stack facing down, or perhaps to keep it sideways, the miniplane would have to be standing up. To account for this, we have added holes to the miniplanes so air can pass through. (see photo of actual boards beneath). For the doublescroll, the fan position will be best at the end. Not to say that shooting a fan across won't still be effective, but shotting it along the fins of the heatsink is ideal. Now i know this is a bit weird, and apologies for that, but it was the best we could do with the heatsinks we got. It will still work. Spotwood, could you have a look at factoring this into your design. Cheers.
|
|
|
|
Spotswood
|
|
November 05, 2013, 05:36:47 AM |
|
Hey all. So a quick note on the cases. Firstly thanks Spotswood for your work. Looking really nice. There is one element of the design that is a little counter-intuitive, which is that the fins of the heatsinks go length ways down the boards. (we couldn't find sideways ones at short notice). This means that the best fan position is going to be directly on top of the miniplane stack facing down, or perhaps to keep it sideways, the miniplane would have to be standing up. To account for this, we have added holes to the miniplanes so air can pass through. (see photo of actual boards beneath). For the doublescroll, the fan position will be best at the end. Not to say that shooting a fan across won't still be effective, but shotting it along the fins of the heatsink is ideal. Now i know this is a bit weird, and apologies for that, but it was the best we could do with the heatsinks we got. It will still work. Spotwood, could you have a look at factoring this into your design. Cheers. Done.
|
|
|
|
flemeister
Member
Offline
Activity: 64
Merit: 10
|
|
November 05, 2013, 06:11:28 AM |
|
Done. Nice! I think that looks better anyway, like having the fans as a lid of sorts, or at least a neater looking top surface. Also gives easier access to dust filters on the fans, should people decide to install their own.
|
|
|
|
Barntech (OP)
|
|
November 05, 2013, 06:42:58 AM |
|
Also,
I have an update from our manufacturers. There is going to be a delay of about 2-3 days on our boards. I am really sorry for this. It is very frustrating from my point of view as it is entirely out of my control.
There has been an issue with the Atmel processor chips which are the main brains of our boards. Apparently the United States has particularly tight regulations about parts which have encryption capabilities and makes you jump through many hoops to get them shipped. Digikey U.S. was the only company that had enough of these chips in stock for our production. I thought this had been dealt with long ago but just found out there were still issues. Basically the states don't want to be providing China with spy capabilities or something, which is of course ridiculous in this context but has meant that the processor chips for our boards have been held up delaying assembly. Rah!
Anyhow, things have been sorted now and the package is set to arrive tomorrow and which point the assembly will proceed. This means that we will be looking at getting finished boards back on Friday or Saturday. Flashing firmware and testing over the weekend and shipping on Monday.
It's truly very frustrating to bring you this news, but there is nothing i can do. I'll keep you all posted as we go. And thank you all for your patience on this final hurdle.
Cheers
Barntech
|
|
|
|
Barntech (OP)
|
|
November 05, 2013, 06:45:30 AM |
|
Hey all. So a quick note on the cases. Firstly thanks Spotswood for your work. Looking really nice. There is one element of the design that is a little counter-intuitive, which is that the fins of the heatsinks go length ways down the boards. (we couldn't find sideways ones at short notice). This means that the best fan position is going to be directly on top of the miniplane stack facing down, or perhaps to keep it sideways, the miniplane would have to be standing up. To account for this, we have added holes to the miniplanes so air can pass through. (see photo of actual boards beneath). For the doublescroll, the fan position will be best at the end. Not to say that shooting a fan across won't still be effective, but shotting it along the fins of the heatsink is ideal. Now i know this is a bit weird, and apologies for that, but it was the best we could do with the heatsinks we got. It will still work. Spotwood, could you have a look at factoring this into your design. Cheers. Done. Awesome. Loving your work. Thank you
|
|
|
|
lajz99
|
|
November 05, 2013, 06:46:03 AM |
|
Damn...that means 2 difficulty jumps before we're up...
|
|
|
|
rob143
Member
Offline
Activity: 138
Merit: 10
|
|
November 05, 2013, 06:50:59 AM |
|
I am just glad that we will see the birth of a new product and another day or 2 sucks but it is what it is and it is. Nothing like the year or more all the BFL people had to wait.
|
|
|
|
beavertank
Member
Offline
Activity: 94
Merit: 10
.
|
|
November 05, 2013, 06:54:17 AM |
|
I am just glad that we will see the birth of a new product and another day or 2 sucks but it is what it is and it is. Nothing like the year or more all the BFL people had to wait.
It's not as long of a wait, but the end result is the same: Profitability is out the window. Any future hardware buy is risky, especially with the way difficulty has been exploding, but it's still extremely frustrating.
|
Did I help you out, or otherwise say something useful? A handful of satoshis are a great way to say thanks! - Address: 18JUKdmE1Satf8HJUU3pf7iu5ymQX8AzER
|
|
|
erk
|
|
November 05, 2013, 07:19:19 AM Last edit: November 05, 2013, 10:04:36 AM by erk |
|
BTC 511mill diff in just 90 blocks time.
The Drillbit batch#1 group buy started when BTC difficulty was just 31million.
|
|
|
|
southerngentuk
Sr. Member
Offline
Activity: 1316
Merit: 254
Sugars.zone | DatingFi - Earn for Posting
|
|
November 05, 2013, 07:49:01 AM |
|
+1000 for Barntech being honest and upfront, I would rather have bad news delivered this way than be bulls*ited along. Any delay sucks but hey am still waiting on BFL and some avalon boards. Funny how my hardware always arrives in reverse purchase order.
|
SUGAR | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | | | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | ███████████████████████████ ███████████████████████████ ██████ ██████ ██████ ▄████▀ ██████ ██████▄▄▄███▀ ▄█ ██████ ██████████▀ ▄███ ██████ ████████▀ ▄█████▄▄▄██████ ██████▀ ▄███████▀▀▀██████ ██████ ▀▀▀▀▀▀▀▀▀ ██████ ██████ ██████ ███████████████████████████ ███████████████████████████ | . Backed By ZetaChain | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | |
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
November 05, 2013, 07:59:59 AM |
|
Thanks for telling us about the delay BT It is what it is........... I'm right there with ya southerngentuk..............BFL-8 month delay...........Avalon-3 month delay............ Just a few days delay ain't nothin to me.......now a few months again ......my red hair MAY catch fire Keep rockin Barntech !!!!!!!!!!!!!!!!!!!
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
Beastlymac
|
|
November 05, 2013, 08:07:00 AM |
|
Sorry for the lack of atmel chip stock. They are also used on our USB units.
|
Message me if you have any problems
|
|
|
|