Endeavour79
|
|
August 09, 2011, 06:17:02 AM |
|
With slicing is it possible to give a certain pool longer time than other pools rather than it splitting the time evenly?
I noticed slicing with MT Red and Polmine that my estimated earning are almost exactly half than if I were to use the default scheduler. BUT with pools ozco.in and triple my estimated reward is the same with sliceing as if I were to use default scheduler. So I was wondering if I spent a bit more time on mtred and polmine could I get those estimated shares back up?
Yep. The slicer is is very configurable and that's why I prefer it. You can adjust it with startup parameters or on the fly with penalty options. I'm currently using: --scheduler=AltSliceScheduler --altslicesize=100 --altminslicesize=15 --threshold=0.475 ...but the slice size assigned to each pool depends upon it's distance from threshold and is therefore affected by the penalty setting. You can get any result you like. Can you please write a tutorial for us howto use and configure this scheduler?
|
NSW, Australia - Rigs, Mining, Pools - Local help needed? Send me a message!
|
|
|
simonk83
|
|
August 09, 2011, 06:18:47 AM |
|
I'm not sure how slicing is done exactly. But I think we should probably give weight to mhashs. on a really fast site, we can get barely any shares in before they hit 43% or what ever we decide the rate should be. we could finish their ratio and be back mining with the slower slites before they got to much further down the line. sorta like how everyone wants to jump on slush quick, because it;s rounds are so short.
way faster sites should probably get some priority, so we submit the most shares over all to both.
Yep, definitely.
|
|
|
|
|
creativex
|
|
August 09, 2011, 06:27:11 AM |
|
With slicing is it possible to give a certain pool longer time than other pools rather than it splitting the time evenly?
I noticed slicing with MT Red and Polmine that my estimated earning are almost exactly half than if I were to use the default scheduler. BUT with pools ozco.in and triple my estimated reward is the same with sliceing as if I were to use default scheduler. So I was wondering if I spent a bit more time on mtred and polmine could I get those estimated shares back up?
Yep. The slicer is is very configurable and that's why I prefer it. You can adjust it with startup parameters or on the fly with penalty options. I'm currently using: --scheduler=AltSliceScheduler --altslicesize=100 --altminslicesize=15 --threshold=0.475 ...but the slice size assigned to each pool depends upon it's distance from threshold and is therefore affected by the penalty setting. You can get any result you like. Can you please write a tutorial for us howto use and configure this scheduler? I surely can. Right after some coffee. :p
|
|
|
|
djex
|
|
August 09, 2011, 06:39:35 AM |
|
I'm not sure how slicing is done exactly. But I think we should probably give weight to mhashs. on a really fast site, we can get barely any shares in before they hit 43% or what ever we decide the rate should be. we could finish their ratio and be back mining with the slower slites before they got to much further down the line. sorta like how everyone wants to jump on slush quick, because it;s rounds are so short.
way faster sites should probably get some priority, so we submit the most shares over all to both.
Yeah now that c00w has coded in re_rate it shouldn't be to hard to utilize that code to grab the hash rate of the pool and adjust priorities based upon pool hash rate. I think this could bring slicing at par or even make it better than default scheduler.
|
: 1LbvSEJwtQZKLSQQVYxQJes8YneQk2yhE3
|
|
|
hawks5999
|
|
August 09, 2011, 07:02:42 AM |
|
Well not sure how the digbit admin correlates chrome with attackers but here is hes explaination for chrome user-agent not working: Yes, it only limit chrome Chrome/13.0.782.109, because attack are using this.
LOL , take your pick guys http://www.user-agents.org/Sorry, I know I'm a few pages behind and this may have already been suggested: Couldn't we have a list of UAs that are randomly (or round robin-ly) rotated through for each lookup request so that there isn't a single detectable signal from BH? If we have all the main browsers (IE/Safari/Firefox/Chrome/Opera) on several platforms (Windows 7/XP/Mac OS/iPhone/Ubuntu/Android) it would make it impossible for a pool operator to identify BH traffic from any other traffic.
|
■ ▄▄▄ ■ ███ ■ ■ ■ LEDGER WALLET ████ ■■■ ORDER NOW! ■■■ LEDGER WALLET Smartcard security for your BTCitcoins ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Decentralized. Open. Secure.
|
|
|
jkminkov
|
|
August 09, 2011, 07:31:41 AM |
|
[digbtc] name: DigBTC.net (DigBIT) mine_address: digbtc.net:8332 api_address: http://digbtc.net/papi.php api_method: json api_key: shares_this_round url: http://www.digbtc.net/main.php I think he's faking total pool size by 300-400%, I had it with bithasher as backup pool, shares grew evenly on both...
|
.:31211457:. 100 dollars in one place talking - Dudes, hooray, Bitcoin against us just one, but we are growing in numbers!
|
|
|
hawks5999
|
|
August 09, 2011, 07:34:01 AM |
|
Interesting. Anyone had a word with them about our good old "we'll give you 1% if you leave us alone" EDIT: Hmmm, what's going on with polmine. The stats just reset to zero, but apparently the current block has been running for 14 hours... yeah polmine might be screwing with us.. they have been talking about it and we have been noticing strange stats. Just checked their forum (thanks to google translate) and saw this: process restart and upgrade completed:) «On: Today at 6:47:29» Welcome to the miners? after the pain, the update finished:) we have a new soft in the mine, the server refreshes We apologize for the inconvenience, if you temporarily unable to view our website www. I assume that means they restarted the server and everything reset. Yeah, but that restart was to implement the following: Miners Welcome! Today may be able to run the mechanism anti-hopper version first. It is not impossible that will change both its parameters and the whole mechanism. Changes will be made depending on the needs and effects of what can be achieved. Although the jumpers contribute to productivity growth (and thus higher profits for each miner) try to set up a mechanism for rewarding those who copy from us reliably and without interruption. How will it work? The mechanism consists of two parts: first Detection of the Knight: Knight is one person who repeatedly (at least in the last 3 blocks) sharply increased its power from us shortly after falling block. Details of the algorithm may not be published until the end, because soon all the bypass jumpers wykombinują. Any doubts will be resolved and explained in prv. Jumper will know that it is regarded as such by the indication in the statistics of the user. 2nd calculation of commissions will be slightly modified as follows a) the previous rules after falling block will be allocated proportionally commission at all, but the value of the block will be reduced (in the first version of the mechanism by 5 BTC) b) 5 BTC frees the block will be distributed in addition to the only reliable kicking (without jumpers) mechanism will be modified depending on the results (whether it will bring us further opportunities for growth and increase in power, or rather the negative consequences). The mechanism can be turned off and completely changed. Please vote in the poll, please also read the interview in the previous thread on this topic http://forum.polmine.pl/index.php?topic=545.0 one hand jumpers help and accelerate the development of the mine, on the other hand get it for what honestly earned (not everyone likes). But try to start this mechanism, we'll see what happens. Essentially they are going to be reducing the block reward by 10-20% and redistributing that amount to non-hoppers. I've disabled them for the time being.
|
■ ▄▄▄ ■ ███ ■ ■ ■ LEDGER WALLET ████ ■■■ ORDER NOW! ■■■ LEDGER WALLET Smartcard security for your BTCitcoins ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Decentralized. Open. Secure.
|
|
|
jkminkov
|
|
August 09, 2011, 08:38:34 AM |
|
just create another account, it is unlikely they mint 4 blocks in one day...
|
.:31211457:. 100 dollars in one place talking - Dudes, hooray, Bitcoin against us just one, but we are growing in numbers!
|
|
|
Keninishna
|
|
August 09, 2011, 12:10:49 PM |
|
lol is deepbit on a 17 mil block or is it just me??
|
|
|
|
jkminkov
|
|
August 09, 2011, 12:27:27 PM |
|
restart hopper, it doesn't work well in long runs but just see how it jumps over long blocks 09.08 12:15:54 0h 12m 513 967706 0.02571080 09.08 12:03:03 0h 41m 0 3142792 None 09.08 11:21:25 0h 10m 518 828211 0.03033406
|
.:31211457:. 100 dollars in one place talking - Dudes, hooray, Bitcoin against us just one, but we are growing in numbers!
|
|
|
simonk83
|
|
August 09, 2011, 12:42:10 PM |
|
Haven't got one share on deepbit yet
|
|
|
|
GoMaD
Member
Offline
Activity: 74
Merit: 15
|
|
August 09, 2011, 12:45:08 PM |
|
Haven't got one share on deepbit yet +1 always above 100% here
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
August 09, 2011, 12:46:07 PM |
|
bad news for me - I think to have to leave bithopper as I come today to my PC I see that no Internet connection is for a few hours... I believe that the network traffik is to big for me (I have 20 GB/month) and in 8 days this volume is over (I have done not much another in net - therfore it must have been the traffik of bithopper...) Is there any way to make it less traffic? (I'm now with another acount here because volume for this month is over...) TIA
|
|
|
|
simonk83
|
|
August 09, 2011, 12:50:47 PM |
|
BTCPool24 stats are jumping around all over the place. One minute it's over 100%, the next it's 2%, then back to 100%, and now zero. The site doesn't even load. To info with you!
|
|
|
|
dribbits
Newbie
Offline
Activity: 20
Merit: 0
|
|
August 09, 2011, 12:58:44 PM |
|
bad news for me - I think to have to leave bithopper as I come today to my PC I see that no Internet connection is for a few hours... I believe that the network traffik is to big for me (I have 20 GB/month) and in 8 days this volume is over (I have done not much another in net - therfore it must have been the traffik of bithopper...) Is there any way to make it less traffic? (I'm now with another acount here because volume for this month is over...) TIA I think you have something else wrong. Ive d/led a few episodes and run BH 24/7 and have only used 4GB down and 1.1 GB up this month. I know 3GB of that was videos.
|
|
|
|
Keninishna
|
|
August 09, 2011, 01:24:56 PM |
|
Haven't got one share on deepbit yet I got my 200 or so shares in so far make sure you use --startlp I think it is arg when running bithopper.
|
|
|
|
GoMaD
Member
Offline
Activity: 74
Merit: 15
|
|
August 09, 2011, 01:37:28 PM |
|
Haven't got one share on deepbit yet I got my 200 or so shares in so far make sure you use --startlp I think it is arg when running bithopper. i'm running it since about 10 hours with --startLP and not a single share.
|
|
|
|
gnaget
|
|
August 09, 2011, 01:50:22 PM |
|
Haven't got one share on deepbit yet I got my 200 or so shares in so far make sure you use --startlp I think it is arg when running bithopper. i'm running it since about 10 hours with --startLP and not a single share. +1 still nothing for me Edit: apparently bitHopper is watching my internet usage, I just switched over and I am currently mining deepbit
|
|
|
|
GoMaD
Member
Offline
Activity: 74
Merit: 15
|
|
August 09, 2011, 01:54:07 PM |
|
Haven't got one share on deepbit yet I got my 200 or so shares in so far make sure you use --startlp I think it is arg when running bithopper. i'm running it since about 10 hours with --startLP and not a single share. +1 still nothing for me Edit: apparently bitHopper is watching my internet usage, I just switched over and I am currently mining deepbit hrhr same for me. First 66 shares.
|
|
|
|
|