akspa
Newbie
Offline
Activity: 53
Merit: 0
|
|
May 01, 2013, 11:11:14 PM |
|
I have a question regarding how the bitminter client mines - is it using diablominer internally? I'm using the latest 1.3.2 release, no problems with 2x 6850's, after downgrading the catalyst driver to v12.8, from 13.4, which seemed to break mining entirely (or at least java crashed indicating a fatal exception within 13.4's amdocl binary). Just wondering about the internals of the client, since it seems to get the most out of my cards.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
May 02, 2013, 01:05:59 AM |
|
I have a question regarding how the bitminter client mines - is it using diablominer internally? I'm using the latest 1.3.2 release, no problems with 2x 6850's, after downgrading the catalyst driver to v12.8, from 13.4, which seemed to break mining entirely (or at least java crashed indicating a fatal exception within 13.4's amdocl binary). Just wondering about the internals of the client, since it seems to get the most out of my cards. No, it's not just a frontend like GUIminer. It's a real miner. It uses OpenCL directly to run its own OpenCL code. Just like the server software, it's all custom built from scratch for BitMinter. I've heard of many crashes with Catalyst 13.1 and 13.4, so I think those two versions are best avoided.
|
|
|
|
vuli
Full Member
Offline
Activity: 233
Merit: 100
Andrius | Junior Business developer at Unboxed ICO
|
|
May 02, 2013, 08:47:12 PM |
|
i dont know. I have drivers 13.1 and it is doing fine.
|
Unboxed - rowing community of people getting paid to do what they love to get a share of the $36 billion brands are spending annually on Facebook Ads
|
|
|
btchaver
|
|
May 13, 2013, 04:48:42 PM |
|
Does bitminter support butterfly labs asics. Does it support all butterfly labs products i know it does the 5ghs version what about the 50ghs. Can all butterfly labs products run on bitminter for example the 60ghs version. Please reply.
|
|
|
|
Turbor
Legendary
Offline
Activity: 1022
Merit: 1000
BitMinter
|
|
May 15, 2013, 06:35:28 PM |
|
Does bitminter support butterfly labs asics. Does it support all butterfly labs products i know it does the 5ghs version what about the 50ghs. Can all butterfly labs products run on bitminter for example the 60ghs version. Please reply.
I'm pretty sure that all BFL products will be supported (once they get them out )
|
|
|
|
koalana
Newbie
Offline
Activity: 27
Merit: 0
|
|
May 19, 2013, 11:19:58 PM |
|
Does bitminter support butterfly labs asics. Does it support all butterfly labs products i know it does the 5ghs version what about the 50ghs. Can all butterfly labs products run on bitminter for example the 60ghs version. Please reply.
I'm pretty sure that all BFL products will be supported (once they get them out ) I am running a Jalapeno on Bitminter beta np. How do i get my friends to mine for me without them having to use my user. Of course i give them worker user and pass. K.
|
|
|
|
GreatBug
|
|
May 24, 2013, 11:38:50 AM |
|
Is ASICMiner's USB erupter supported?
BitMinter's UI and ease of use would be perfect for a new miner with an inexpensive USB miner to get started.
I plan to gift some to family and friends to spread interest in Bitcoin, and BitMinter would be perfect as a headache-free way to get someone started.
|
|
|
|
jodoidao
|
|
May 26, 2013, 09:10:37 PM |
|
Help me, I start the client and when a click on the mining button (play), the client just crash and quit. How can I fix it ?
|
|
|
|
GreatBug
|
|
May 29, 2013, 03:21:45 AM |
|
Is ASICMiner's USB erupter supported?
BitMinter's UI and ease of use would be perfect for a new miner with an inexpensive USB miner to get started.
I plan to gift some to family and friends to spread interest in Bitcoin, and BitMinter would be perfect as a headache-free way to get someone started.
I just tested with an ASICminer USB erupter on OS X. Does not work.
|
|
|
|
HTML5 Gordon
|
|
May 29, 2013, 12:27:39 PM |
|
Is ASICMiner's USB erupter supported?
BitMinter's UI and ease of use would be perfect for a new miner with an inexpensive USB miner to get started.
I plan to gift some to family and friends to spread interest in Bitcoin, and BitMinter would be perfect as a headache-free way to get someone started.
I just tested with an ASICminer USB erupter on OS X. Does not work. I don't have my USB Erupter yet, so haven't been able to test, but did you try installing this OS X driver and then running Bitminter again? http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
|
|
|
|
FCTaiChi
|
|
May 29, 2013, 09:54:36 PM |
|
Good work Dr. Thanks for making this miner/pool!
|
|
|
|
rafety58
Newbie
Offline
Activity: 34
Merit: 0
|
|
May 30, 2013, 03:06:54 PM |
|
Is any one finding that they are getting less stales in windows 8?
So far I am up to 2750 accepted, and only 3 stales.
|
|
|
|
RoboCoder
|
|
June 01, 2013, 03:14:45 PM |
|
Is ASICMiner's USB erupter supported?
BitMinter's UI and ease of use would be perfect for a new miner with an inexpensive USB miner to get started.
I plan to gift some to family and friends to spread interest in Bitcoin, and BitMinter would be perfect as a headache-free way to get someone started.
FWIW.. I am running 1.3.2 client on win7 x64 with 9 AsicMiner USB's. The client recognizes them as Icaruses.. The only odd thing is that the hash rate reported by the client seems to be 2x the actual hashrate. But they are mining just fine.
|
|
|
|
btceic
|
|
June 02, 2013, 03:19:56 PM |
|
Would you consider a LiteCoin Java Miner when BTC difficulty goes through the roof?
|
|
|
|
oroboras
|
|
June 02, 2013, 03:27:55 PM |
|
Help me, I start the client and when a click on the mining button (play), the client just crash and quit. How can I fix it ?
I am having the same issue - Windows 8 64bit, fresh 64bit Java install (cleared Java cache too & re-installed latest version) Any help would be appreciated. also, my 2 GPUs seem to only run at about 89-90% of maximum on BitMinter (using GUIminer) - yet when I was on Slush's, one ran at a constant 99%, and the other at 93-98%. Again, is there any way to tweak it to get maximum constant output?
|
|
|
|
FCTaiChi
|
|
June 02, 2013, 04:22:29 PM |
|
How do i get my friends to mine for me without them having to use my user. Of course i give them worker user and pass.
K.
Worker user and pass are all you should need, could you please clarify?
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
June 02, 2013, 10:02:36 PM |
|
Help me, I start the client and when a click on the mining button (play), the client just crash and quit. How can I fix it ?
It probably leaves a hs_err_pid crash log on your desktop (could also be in a temporary folder, not easy to find), which says problematic frame: amdocl.dll - a crash in the AMD OpenCL driver. AMD has been unable to create proper drivers in 2013 so far. They work for some people, but for many they either crash all miners or some miners. You can try installing the latest beta, maybe they finally managed to do something right, or you could try a 2012 driver. Even if you get a proper driver the AMD uninstaller doesn't work (never has since AMD was founded), and it may leave behind files that will cause miners to still crash. You could try the cleanup utility at AMD website, or driver sweeper from guru3d, or manual cleanup as discussed here: http://forums.guru3d.com/showthread.php?t=359883I just tested with an ASICminer USB erupter on OS X. Does not work.
Did you install the FTDI driver? In BitMinter client when you click "devices" -> "probe all ports" in the menu it will give you a link to download the drivers if no ASIC or FPGA is detected. Would you consider a LiteCoin Java Miner when BTC difficulty goes through the roof?
Once I have the important BTC stuff under control, I will have a look at LTC and see if it makes sense. also, my 2 GPUs seem to only run at about 89-90% of maximum on BitMinter (using GUIminer) - yet when I was on Slush's, one ran at a constant 99%, and the other at 93-98%. Again, is there any way to tweak it to get maximum constant output?
There shouldn't be any difference there. I doubt this issue has to do with which pool you're mining with.
|
|
|
|
True___Blue
|
|
June 03, 2013, 10:06:05 PM |
|
Is ASICMiner's USB erupter supported?
BitMinter's UI and ease of use would be perfect for a new miner with an inexpensive USB miner to get started.
I plan to gift some to family and friends to spread interest in Bitcoin, and BitMinter would be perfect as a headache-free way to get someone started.
FWIW.. I am running 1.3.2 client on win7 x64 with 9 AsicMiner USB's. The client recognizes them as Icaruses.. The only odd thing is that the hash rate reported by the client seems to be 2x the actual hashrate. But they are mining just fine. I also am runing an USB block erupter and it is mining just fine. But I also have the same problem where the client is reporting a hash rate much higher than the website is reporting it.
|
|
|
|
HTML5 Gordon
|
|
June 03, 2013, 10:43:26 PM |
|
Just got my USB Block Erupter up and running on my Mac using BitMinter. Working great. Currently reporting 671.5 Mhps, so I guess it is running ~335 Mhps.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
June 03, 2013, 11:04:14 PM |
|
I don't have any Block Erupter USB units to test with, but I'm starting to figure this out. The hashrate currently shows 2x what it should be. This is because the Icarus device had 2 FPGAs which split the noncerange between them, while apparently the Block Erupter has 1 chip doing the nonce range from start to finish. Just got my USB Block Erupter up and running on my Mac using BitMinter. Working great. Currently reporting 671.5 Mhps, so I guess it is running ~335 Mhps. Did you have to "probe specific port" to get that working? What I suspect to be the solution: Instead of FTDI drivers, get Silabs drivers: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspxOn Mac OS X this gives serial ports with a different filename than the usual /dev/usbserial* from FTDI. With the current BitMinter client that won't work automatically, so you have to open a Terminal window and type to find the name. Probably /dev/cu.SLAB_USBtoUART. If you have multiple units then they will also have a number at the end. Then click "devices" -> "probe specific port" in the menu, and type in the full path, /dev/cu.SLAB_USBtoUART - the device should be detected. Not confirmed to be working yet, so a confirmation would be useful.
|
|
|
|
|