LordMord
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 09:21:12 AM |
|
I get this error with beta 11: Connection failed: Invalid argument: getsockname
Do you have a firewall blocking the program? Are you running on Windows 8? Running Windows 8. But that was no problem for beta 9.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 09:36:30 AM |
|
Running Windows 8. But that was no problem for beta 9.
Beta 9 was using synchronous network I/O. Beta 11 has asynchronous I/O. Apparently when doing an asynchronous connect Java will call getsockname() before the connection is established. This works on every operating system except Windows 8. Are you using the latest, Java 7, update 4? This could become an annoying issue. There's no workaround either.
|
|
|
|
LordMord
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 09:41:37 AM |
|
Running Windows 8. But that was no problem for beta 9.
Beta 9 was using synchronous network I/O. Beta 11 has asynchronous I/O. Apparently when doing an asynchronous connect Java will call getsockname() before the connection is established. This works on every operating system except Windows 8. Are you using the latest, Java 7, update 4? This could become an annoying issue. There's no workaround either. Yes i have Java 7 update 4. Guess i have to use the non Beta Miner. If there is no workaround you might want to consider an option to switch back to synchronous networking. Let's hope the final version of Windows 8 or the next Java update fixes it.
|
|
|
|
MoneyIsDebt
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 12:43:24 PM |
|
This could become an annoying issue. There's no workaround either.
There's almost certainly a workaround. PM me if you want me to look at the relevant code.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 06:09:45 PM |
|
Beta 12 is out, with 2 changes: - Fixed memory leak that would lead to high memory and CPU consumption over time, faster if you had high hash rate
- Made the network code more likely to go from 1 to 2 parallel connections
Testing this for 3-4 hours shows very low CPU usage with BFL singles and only about 0.05% rejected proofs of work. (CPU use will be a bit higher on Mac OS X than Windows and Linux because I had to implement a dirty workaround to avoid a bug in the serial port library) If anyone has a chance to try this on the Raspberry Pi or other ARM-based devices, please let me know. In theory it may work, but I have a feeling the miner will be a tight fit for the low amount of memory on these devices. There's almost certainly a workaround. PM me if you want me to look at the relevant code.
According to Oracle's bug tracker there's no workaround. I guess the workaround for us is having synchronous networking for running on Windows 8 until they fix this issue. I could offer older versions (suggested by btc196) or offer a synchronous/asynchronous switch in config (suggested by LordMord). Making older versions available is the quickest solution, and something I was planning on doing at some point anyway. But it does mean new releases won't work on Windows 8 until Microsoft or Oracle implement a fix. Anyone planning on running FPGAs on Windows 8 beta?
|
|
|
|
LordMord
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2012, 07:27:33 PM |
|
Anyone planning on running FPGAs on Windows 8 beta?
Nope i got an old Machine with Windows XP for that.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2012, 09:08:34 PM |
|
Version 1.2.0 is out. Thanks to everyone who helped test it, especially Fefox and Phraust. This took a lot more effort than I had anticipated, but now it's done and we have a much improved miner. Changes from 1.1.2 to 1.2.0: - Support FPGA devices from Butterfly Labs (BFL)
- Network subsystem rewritten: fast work download over multiple pipelined
connections to be able to handle higher hash rates. Also yields fewer rejected proofs of work. - Added minimize/maximize buttons on each device. The compact display
is handy if you have a long list of devices. Remembered across restarts. - The start button of the "total" device now starts only the visible
devices instead of all devices the first time you click it. The next time you use it to start devices it will resume those you stopped with it, like it always did. The start button on the status bar works the same. - Adjusted expected hash rate (green zone) for Juniper GPU
- Fixed some minor GUI bugs
Try it out: Windows 8 note:Version 1.2.0 will not run on current Windows 8 beta versions with current Java releases because of a problem with asynchronous I/O running Java on Windows 8. Until this is fixed in either Java or Windows, if you want to run the miner on Windows 8 you will have to use the previous release: http://bitminter.com/client/1.1.2/bitminter.jnlp
|
|
|
|
Jabba
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 109
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2012, 07:49:14 AM |
|
Hi,
I downloaded your client to run with two BFL V1.3. More to come... I'm running Bitminter Client V1.2.0 (also tested the Beta) and I received the following messages in the report box:
2012.06.15 [09:32] BitFORCE (COM8) ERROR: Extraneous data received: NO-NONCE 2012.06.15 [09:33] BitFORCE (COM7) ERROR: ZFX command timed out. Retries: 0 2012.06.15 [09:33] BitFORCE (COM7) ERROR: Extraneous data received: NO-NONCE 2012.06.15 [09:34] BitFORCE (COM8) ERROR: ZFX command timed out. Retries: 0 2012.06.15 [09:34] BitFORCE (COM8) ERROR: Extraneous data received: NO-NONCE
When I start the speed rises up to its supposed maximum. Temperature is between 45° and 55° C. After a short while it seems to start throttling and these messages show up. I'm connected via 100 MBit cable and ping shows < 30ms. My OS is Win7, latest patches installed. Hardware: e350, 4 GB Ram
Any idea?
Thanks
Jabba
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2012, 08:01:02 AM |
|
When I start the speed rises up to its supposed maximum. Temperature is between 45° and 55° C. After a short while it seems to start throttling and these messages show up.
Yeah, if it is throttling it's not responding to commands for some seconds. That's why you are getting the timeouts. It will still run although the messages can be annoying. But it may be best to avoid throttling. Perhaps improve cooling, or use a firmware with lower hash rate.
|
|
|
|
Jabba
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 109
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 15, 2012, 11:25:25 AM |
|
Thanks for your reply.
I can't see that these temps are too high, but I'll give it a try by using another firmware.
Thanks
Jabba
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2012, 01:07:57 PM |
|
For the next miner version I'd like to add support for Icarus and Cairnsmore FPGA devices. If you can give me remote access to a computer with one for testing, please let me know.
|
|
|
|
Turbor
Legendary
Offline
Activity: 1022
Merit: 1000
BitMinter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2012, 05:47:31 PM |
|
For the next miner version I'd like to add support for Icarus and Cairnsmore FPGA devices. If you can give me remote access to a computer with one for testing, please let me know.
I have an Icarus you could use. Do you have TeamViewer?
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2012, 06:42:12 PM |
|
I have an Icarus you could use. Do you have TeamViewer?
Thanks that would be great. Yep, I have TeamViewer. Use PM or operator@bitminter.com for details.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 04, 2012, 07:45:10 PM |
|
BitMinter client v1.3.0beta1 is out! A big thank you to Turbor for access to his system with Icarus and BFL single for testing. Here are the news: - Support Icarus FPGA devices
- Fix "class not found" bug on Raspberry Pi
- Implemented getwork extension: midstate
(calculate midstate on client instead of server, reducing server load) - Implemented getwork extension: rollntime (with "expire" support)
(get more than 1 work unit in a single request to the server) - Dynamic work queue size
- Expire proof of work if undeliverable for 15 minutes
- Expire (non-rollntime) work unit if unprocessed for 5 minutes
- Bugfix: don't count as device miscalculation when a proof of work exceeds
difficulty 1 but not the (above 1) difficulty given by the server
TL;DR: Support Icarus, Raspberry Pi and very high hash rates. I made a lot of changes to the serial port handling (BFL and Icarus). I'm interested in hearing about any old features that may be broken, specifically whether mining on Mac with FPGAs still works without high CPU usage, and new stuff: mining on Icarus, mining with Raspberry Pi (with Icarus or BFL), and mining on Cairnsmore with Icarus bitstream. Or anything else you find good or bad. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Please check it out: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fbitminter.com%2Fimages%2Fbeta.png&t=665&c=O0QxAx0GPwhzzg)
|
|
|
|
Fefox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 02:10:14 AM |
|
Bitminter Beta and MiniRig! WORKING GREAT! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi50.tinypic.com%2F33n7pr7.jpg&t=665&c=zpm1tq83OXufBQ)
|
|
|
|
Turbor
Legendary
Offline
Activity: 1022
Merit: 1000
BitMinter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 04:40:29 AM |
|
Very nice Fefox. Both Icarus and BFL are mining here without problems. Doc is the man.
|
|
|
|
SgtSpike
Legendary
Offline
Activity: 1400
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 08:32:30 AM |
|
Will BitMinter have BFL SC support before they are released?
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 01:13:36 PM |
|
Beautiful screenshot, Fefox. I have to wipe a tear from my eye. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Will BitMinter have BFL SC support before they are released?
I have contacted BFL about that, and it's what I'm aiming for, yes.
|
|
|
|
Vorksholk
Legendary
Offline
Activity: 1713
Merit: 1029
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 07:47:40 PM |
|
Is it possible to mine on a Butterfly Labs single FPGA unit from a Mac? I've been unable to do this... it says "No COM ports found" when I try to scan for FPGA devices. Device works on Windows, have yet to test on Linux.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 05, 2012, 07:55:30 PM |
|
Is it possible to mine on a Butterfly Labs single FPGA unit from a Mac? I've been unable to do this... it says "No COM ports found" when I try to scan for FPGA devices. Device works on Windows, have yet to test on Linux.
Yep, when you scan for devices and it doesn't find any it will give you some hints in the log. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Try grabbing Mac drivers from http://www.ftdichip.com/Drivers/VCP.htmEdit: The stable version runs fine on Mac. But if it's not too much bother I'd love to hear how the beta runs (look a few posts back). Hopefully it still runs fine and with low CPU usage.
|
|
|
|
|