[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[reflexmk]

Anybody helps me please, i stuck with the config of 280x, i use win 8.1 and 4GB ram with the  TC 16384 and I 12, and the cmd show me only HW!

my .bat config, 135-140khs on my 4 dualx 280s


setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNCOBJECTS 1
ultracoinminer -o stratum+tcp://pool -u user -p pass --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0 --gpu-fan 55

cheers.

[1714554215]

1714554215

[1714554215]

1714554215

[1714554215]

1714554215

[1714554215]

1714554215

[nanoprobe]

For ppl asking for 270x  and 290 miner .bat or .conf

I use -g 2, --gpu-threads 1, I 18 and look gap 2 for both cards.
tc 270x 25984
tc 290 i use 51968 running for 4 days straight, but anything over 42000 works for a few hours but crashes for me. 12gb ram allows high tc like 51968.

270x 90kh 1150/1466
290 170kh 1050/1470

minimal/no rejects, no HW

Are you sure you can use -g 2 on 270x ?? I tried it but it gives me HW errors and runs very slow. I can only run it at -g 1

I get a steady 93-94 kh/s with 0 HW errors on my 270X cards. Never crash. I will post my config file (again) if anyone is interested.

Yes, sure I need it! But i have non-x 270, anyway it should be approx. the same. BTW my stat shows when mining on leetpool http://simplest-image-hosting.net/png-0-uuuuuuuuuuuu31122-1920x1080-scrot
I'm in doubt regarding  stale share, think it bit more than normal. Pool website showing around 150  kHs mining speed (2x270).
Setting

Code:

"failover-only" : true,
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"api-allow" : "127.0.0.1",
"api-listen" : true,
"auto-fan" : true,
"gpu-fan" : "30-75",
"work-size" : "256",
"gpu-threads" : "1",
"gpu-engine" : "1150",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"thread-concurrency" : "27000",
"intensity" : "17",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "90",
"queue" : "0",
"scan-time" : "1",
"expiry" : "1",
"lookup-gap" : "2",
"no-submit-stale" : true

270 non X should do about the same as the X version on this coin. Below are my settings. Good luck

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "1125-1125",
"gpu-fan" : "0-85",
"gpu-platform" : "0",
"gpu-memclock" : "1425",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"intensity" : "16",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "0",
"thread-concurrency" : "23576",
"no-pool-disable" : true,
"scrypt-jane" : true

[xwebnetwork]

WEBSITE UPDATES:

INDEX
Added live price ticker with feed from CryptoTrade (thanks DCGirl!)

SERVICES
Added CountMyCrypto
Added CryptMarketCap

SHOPS
Added BlueVelvetCasino
Added Gamblex
Moved CryptoSexToys down the list due to popular demand

TO DO
News Feeds
Twitter Implementation
Dynamic news page instead of static HTML
Chat
Contact Form (server issue)
UTC Lottery
Mac miner link has to be updated (need to remove SpeedyShare due to issues) << Anybody have a link to the Mac miner but not via SpeedyShare?

[untalented]

Hi all
Some updated optimal settings:


HD7870XT/270X ~75-85Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 25948 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


HD7950 (1044/1500) ~100Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0


HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
 

R9 290 8GB RAM (1040/1400) ~180Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290 4GB/6GB RAM (1040/1400) ~140Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


R9 290X 8GB RAM (1040/1400) ~195Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290X 4GB/6GB RAM (1040/1400) ~155Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0



1.Sometimes on HD7950/7970/280X cards gives better results --thread-concurrency 16484
2.If one of your cards is less efficient than it should have, reboot your system (Windows / Linux).

[SxC]

If UTC reaches 0.0004 on crypto-trade and im online at the time or logon and it's still @ 0.0004

I will give away 10 x 100 UTC code's to redeem on Crypto-trade

my username there is Jeff6475

I dont use twitter or FB so if anyone wants to post this on there feel free spread the word

I'll announce a time when the giveaway will start

That's gonna be tomorrow I recon ;-)

Well Jeff... Hou were there today I recon... ;-)

Yea my offer still stands just read the 1st line of my giveaway post "im online"

i missed it i came on when it was on the way back down

also it reached over 0.0005 so 2 other ppl will be giving away 1k each

newbietrader and cant remember the other guy

[jakiman]

WEBSITE UPDATES:

INDEX
Added live price ticker with feed from CryptoTrade (thanks DCGirl!)

Awesome! Thanks xweb & dcgirl.

Some suggestions that came up on CT:
1. Make it single line instead of 2 lines.
2. Make it look less static. (e.g. green/red font color or arrows every refresh/change)
3. Make it more obvious that it's 24h Low/High/Volume maybe?
4. Make the price font easier to see. (brighter font color etc)

[jakiman]

HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

--lookup-gap 2 does not work on 4GB machines depending on how many 280x you have.
I have a 4 x 280x rig with 4GB RAM and it hangs/crashes when I set to 2. It works with 3.
Once I upgraded to 8GB RAM, it worked and I got about 20% higher hash rate. (from 110 to 135-140)

[xwebnetwork]

WEBSITE UPDATES:

INDEX
Added live price ticker with feed from CryptoTrade (thanks DCGirl!)

Awesome! Thanks xweb & dcgirl.

Some suggestions that came up on CT:
1. Make it single line instead of 2 lines.
2. Make it look less static. (e.g. green/red font color or arrows every refresh/change)
3. Make it more obvious that it's 24h Low/High/Volume maybe?
4. Make the price font easier to see. (brighter font color etc)

Single line it is. I will see about the other suggestions too! Thanks!

Also, added Twitter feed to news page.

[Toxic2040]

Nice updates!  Thanks for the consolidated settings as well. Should be stuck on front page.

[untalented]

HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

--lookup-gap 2 does not work on 4GB machines depending on how many 280x you have.
I have a 4 x 280x rig with 4GB RAM and it hangs/crashes when I set to 2. It works with 3.
Once I upgraded to 8GB RAM, it worked and I got about 20% higher hash rate. (from 110 to 135-140)

Hmm, on my rigs 7970/280x with 4GB RAM --lookup-gap 2 works perfect 
But it is helpful information, it may be useful to someone.
Maybe you have not enough virtual memory or disk space?

[nanoprobe]

Hi all
Some updated optimal settings:


HD7870XT/270X ~75-85Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 25948 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


HD7950 (1044/1500) ~100Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0


HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
 

R9 290 8GB RAM (1040/1400) ~180Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290 4GB/6GB RAM (1040/1400) ~140Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


R9 290X 8GB RAM (1040/1400) ~195Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290X 4GB/6GB RAM (1040/1400) ~155Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0



1.Sometimes on HD7950/7970/280X cards gives better results --thread-concurrency 16484
2.If one of your cards is less efficient than it should have, reboot your system (Windows / Linux).

Better settings for 270/270x are 2 posts above this original post. 93 kh/s (From my rigs that run 4 cards per rig with 8GB ram)

[untalented]

Hi all
Some updated optimal settings:


HD7870XT/270X ~75-85Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 25948 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


HD7950 (1044/1500) ~100Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0


HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
 

R9 290 8GB RAM (1040/1400) ~180Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290 4GB/6GB RAM (1040/1400) ~140Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


R9 290X 8GB RAM (1040/1400) ~195Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290X 4GB/6GB RAM (1040/1400) ~155Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0



1.Sometimes on HD7950/7970/280X cards gives better results --thread-concurrency 16484
2.If one of your cards is less efficient than it should have, reboot your system (Windows / Linux).

Better settings for 270/270x are 2 posts above. 93 kh/s

With 950MHz core and 1500MHz MEM settings? 

[nanoprobe]

Hi all
Some updated optimal settings:


HD7870XT/270X ~75-85Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 25948 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


HD7950 (1044/1500) ~100Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0


HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
 

R9 290 8GB RAM (1040/1400) ~180Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290 4GB/6GB RAM (1040/1400) ~140Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


R9 290X 8GB RAM (1040/1400) ~195Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290X 4GB/6GB RAM (1040/1400) ~155Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0



1.Sometimes on HD7950/7970/280X cards gives better results --thread-concurrency 16484
2.If one of your cards is less efficient than it should have, reboot your system (Windows / Linux).

Better settings for 270/270x are 2 posts above. 93 kh/s

With 950MHz core and 1500MHz MEM settings? 

If you talking about 270s that's with 1125 core 1425 memory

[untalented]

Hi all
Some updated optimal settings:


HD7870XT/270X ~75-85Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 25948 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


HD7950 (1044/1500) ~100Kh/s

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0


HD7970/280x (1044/1500) ~135Kh/s (280x)

setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
 

R9 290 8GB RAM (1040/1400) ~180Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290 4GB/6GB RAM (1040/1400) ~140Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 42000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0


R9 290X 8GB RAM (1040/1400) ~195Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0


R9 290X 4GB/6GB RAM (1040/1400) ~155Kh/s

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 64 -g 1 -I 18 --thread-concurrency 45000 --no-submit-stale --lookup-gap 3 --expiry 10 --scan-time 1 --queue 0



1.Sometimes on HD7950/7970/280X cards gives better results --thread-concurrency 16484
2.If one of your cards is less efficient than it should have, reboot your system (Windows / Linux).

Better settings for 270/270x are 2 posts above. 93 kh/s

With 950MHz core and 1500MHz MEM settings? 

If you talking about 270s that's with 1125 core 1425 memory

Yes, with that core and memory settings you can have ~90 Kh/s.
I used old 7870XT with 950Mhz core and 1500MHz memory, and i have ~75Kh/s.
When i set core 1080MHz i have ~85Kh/s on that 7870XT with this settings.
I focus on scrypt settings, not O/C cards 

[nanoprobe]

Yes, with that core and memory settings you can have ~90 Kh/s.
I used old 7870XT with 950Mhz core and 1500MHz memory, and i have ~75Kh/s.
When i set core 1080MHz i have ~85Kh/s on that 7870XT with this settings.
I focus on scrypt settings, not O/C cards 

FWIW I'm running on stock voltage but these cards are voltage locked above where I would run them if I could change it.

[serdan]

thanks for the pump yesterday! 

[goodluck0319]

is it too late to mine this coin or not?

[MaxCoinDevsAreTwats]

Let's keep quoting the longest post!

Blockchain explorer offline

[laterbreh]

is it too late to mine this coin or not?

Of course not.

[dukas93]

No more pump? Don't make the coin die, please stupid dump and pump.