[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[dcgirl]

As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...


(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.

[Jacques21]

Dont forget to enter this weeks lottery www.ultracoinlottery.com

Draw is on Sunday 10am UTC

Any donations for the giveaway are welcome UjmaVKmXnY6pCo7FiyKpu9Ys4eggEize79

So far the jackpot is at 109 UTC

[Becel]

As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...
https://i.imgur.com/JtG2HZj.png

(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.

Awesome dcgirl +100

[funsponge]

DCGirl that is awesome! I wish I could do things like this. How on earth have you done it? Did someone give you the template code? Very impressed

[dcgirl]

DCGirl that is awesome! I wish I could do things like this. How on earth have you done it? Did someone give you the template code? Very impressed

Thanks! I started with highstock (a plugin for highcharts), then built server code to get and summarize the data, and did some javascript to display it all. Still have a bunch of work to do, but this is a good base.

[ozzy1926]

when we receive the block find bonus ? I found 2 blocks today but only got 50utc.(utc.pool.pm)

[cryptoface]

As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...


(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.

Thats looks great!

[dcgirl]

 1 question. how did the some of the candles open lower than the last candles close ? i think there is something wrong

yes, I need to go over the numbers, make sure they're right (same with candle color). They will be when its released.

[bumface]

As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...


(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.

that looks absolutely fantastic

[KingCole]

As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...


(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.

Looks very good DCGirl

KC

[bumface]

laterbreh: ziggy says the client is multithread

[pieterjanvh]

Very nice DCGirl!

[Wirly]

hmmmmm, I'm not getting close those numbers with my current setup. The best I can manage is with my original setting of about 84Khs per card and a WU of:

GPU 0 = WU: 72.6
GPU 1 = WU: 84.6
GPU 2 = WU: 75.6
GPU 3 = WU: 72.6

I tried increasing TC to 191712 and adding --lookup-gap 3, however; that dropped my hash rate to the 60's and my WU to the 50's. My invalid % also went up on my mining pool.

Wirly, would you be willing to share your .conf or .bat file so I can give it a shot on my system?

 I have the hd7950 Boost edition stock oc is 925/1250
also my system memory is 8gb dram @ 1600mhz
Here my .bat settings:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 --thread-concurrency 16128 --no-submit-stale --lookup-gap 2 --gpu-reorder -I 12 --gpu-vddc 1.12 --auto-gpu --gpu-powertune 20 --gpu-engine 925-1100
--gpu-memclock 1250 --gpu-fan 65 --temp-overheat 80 --temp-cutoff 90 --queue 0 --scan-time 1 --expiry 10

this gave me hashrate 104 kh/s,

then changed win virtual memory set to "manual" at "22000mb" (64gb ssd drive) for programs- Not let windows decide and this increased hashrate by 10% to 114kh/s and a WU of 93 to 110 on 11 cards. This surprised me

Edit: now I am getting the occasional random hw error, not sure if this is related to pool difficulty or anything else but wu is still good so I will let it go for a bit and see what happens. Don't want to lower the "cha-ching" rate if don't have to!

Hey, thanks for posting your .bat . I have 4x Sapphire Dual-X (SKU 11196-19-20G) stock clock 850Mhz/925Mhz boost clock. Other than that, my setup looks identical to yours.   I tried this .bat and got my hash rate up to 90, WU rate also increased, which is awesome but...bad news bears - one card went *dead* after a few hours of mining.

I think this has to do with my cards not getting enough power. I see your vddc setting is 1.12(0?), I have mine flashed to 1.113 and I don't think cgminer was able to bump up the voltage through the .bat I'll try flashing to 1.125v and 1.131v and see what happens.

What does --gpu-reorder accomplish?

--gpu-reorder attempts to number the gpu according to the pci-e slots on the mob, just for reference purpose. Be careful overvolting this card, it is the one thing that will fry the vrm, watch out for throttling, a sure sign of running to much power. It would be safer to just find  settings that work. just put engine clock lower until it is stable and accept what hashrate it gives you.

[vincenm]

hi guys,


I would like to start mining UTC and joined https://utc.pool.pm.

I would like to configure my wallet (with ultracoin.conf file in User App Data Roaming Ultracoin in Windows 8 I suppose).

But I can't find the info anywhere, I think it should be something a bit like this but with different settings :

Code:

listen=1
maxconnections=32
rpcuser=user
rpcpassword=password
server=1
rpcallowip=192.168.0.4:7777
addnode=85.195.118.163
algo=qubit

Could anyone help ?


Thank you 

[xwebnetwork]

@vincem

You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.

@Jacques21

I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!

@dcgirl

Absolutely stunning!

[vincenm]

Thank you verymuch !

[Jacques21]

@vincem

You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.

@Jacques21

I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!

@dcgirl

Absolutely stunning!

Cool thanks for that.

Im doing a few things on the lottery site to make it display perfectly on all resolutions and phones/tablets

Good Job

[dcgirl]

@vincem

You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.

@Jacques21

I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!

@dcgirl

Absolutely stunning!

Thank you! You can post the image on the fb page if you want, with a "coming soon" title.

[vincenm]

hi,

it's me again



I am trying to configure a bat file (windows 8.1) for sgminer for mining UTC  on http://utc.pool.pm/and it does not work at all

I tried :

Code:

sgminer -k scrypt-jane -o stratum+tcp://pickaxe.pool.pm:3306 -u xx -p yy 

(xx being my worker name and yy my worker password)


Can somebody help ? What am i doing wrong ?



Thanks 

[nanoprobe]

@vincem

You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.

@Jacques21

I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!

@dcgirl

Absolutely stunning!

Thank you! You can post the image on the fb page if you want, with a "coming soon" title.

Awesome looking dcgirl. Can't wait to see the finished product.