[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[carlo_0000]

to re-benchmark

just delete the file in stats folder

[1714874488]

1714874488

[1714874488]

1714874488

[1714874488]

1714874488

[Nightworker88]

If you can run one claymore miner on system, you should be able to configure right eg. claymore zcash miner without any problems, system do not need any updates.

Surely something in bat.

Just tested for last 12h claymore 11.1 on several different config. rigs -- stabil, more hash, working great like 99% always.

so -- just tested in mph and multipoolminer 11.1 -- of course, worked.

if in multipoolminer a miner will not work -it will also not work in single test!  if you want use mph or multipoolminer, just delete the miners which do not work or you do not like

then all will be fine

[melloyellow]

Update was already installed.

Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.

It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.

Miner works well if i start it directly from the miner folder (Any of the Claymore miner).

There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.

I Did test that... zecminer windows pops up and computer crashes. The is nothing else than Claymore file in the miners folder.

Also is there a way to re-benchmark? If I add change gpu(s).

I will add zcash miner 11.1 when I finally upload MultiPoolMiner 2.4 as a release but you can update the zec miner manually in the bin folder if that helps. (Hopefully upload tonight after I check it's working correctly now; will mark as a pre-release though. )

It's dynamic enough to adjust to small changes in performance but if you add a whole graphics card then you'll want to delete the stats files.

Is there a way to 'delete' algos?  E.g. I have no interest in mining scrypt or x11 coins.  Will deleting the kernel files be sufficient?

[aaronsace]

Is there a way to 'delete' algos?  E.g. I have no interest in mining scrypt or x11 coins.  Will deleting the kernel files be sufficient?

I doubt they will be most profitable after benchmarking but you can edit the files in the 'miners' folder for any adjustments like deleting algorithms. There is no simple filter at the moment.

[melloyellow]

Is there a way to 'delete' algos?  E.g. I have no interest in mining scrypt or x11 coins.  Will deleting the kernel files be sufficient?

I doubt they will be most profitable after benchmarking but you can edit the files in the 'miners' folder for any adjustments like deleting algorithms. There is no simple filter at the moment.

True, I was just trying to cut down on the benchmarking time.  Also some of the lesser used algos crash my drivers and then I would have to restart the benchmarking process all over again.

[carlo_0000]

i was benchmarking on 2 computers  but i have this

[01:12:49] Press any key to exit, or cgminer will try again in 15s.
[01:13:04] Pool 0 JSON stratum auth failed: (null)
[01:14:04] No servers were found that could be used to get work from.
[01:14:04] Please check the details from the list below of the servers you have
input
[01:14:04] Most likely you have input the wrong URL, forgotten to add a port, o
 have not set up workers
[01:14:04] Pool: 0  URL: http://stratum+ssl://hub.miningpoolhub.com:17016  User
 carlo_0000.rx-470x6  Password: x
[01:14:04] Press any key to exit, or cgminer will try again in 15s.
[01:14:19] Pool 0 JSON stratum auth failed: (null)


i notice it try connect with ssl?   how to remove that ?

[aaronsace]

i was benchmarking on 2 computers  but i have this

[01:12:49] Press any key to exit, or cgminer will try again in 15s.
[01:13:04] Pool 0 JSON stratum auth failed: (null)
[01:14:04] No servers were found that could be used to get work from.
[01:14:04] Please check the details from the list below of the servers you have
input
[01:14:04] Most likely you have input the wrong URL, forgotten to add a port, o
 have not set up workers
[01:14:04] Pool: 0  URL: http://stratum+ssl://hub.miningpoolhub.com:17016  User
 carlo_0000.rx-470x6  Password: x
[01:14:04] Press any key to exit, or cgminer will try again in 15s.
[01:14:19] Pool 0 JSON stratum auth failed: (null)


i notice it try connect with ssl?   how to remove that ?

Is that the issue? You can edit 'reorder.txt' in the miners folder.
I don't appear to be getting that error message; although it may not support ssl, it doesn't break it.

BTW, I'll release v2.4 once the windows release of sgminer-gm 5.5.5 is available for download. They had some issues compiling.

[carlo_0000]

ouch i found the problem   was something wrong with my username  



i notice miner doesn't change clock speed

905 MH/s 00:16  1 Time(s) Bin\Reorder\cgminer.exe --api-listen --skein -o stratum+ssl://europe1.digibyte-skein.miningpoolhub.com:20527 -u carlo0000.sapphire -p x -I 11 -g 2 -w 64 --gpu-engine 1048 --gpu-memclock 1400


but clock still running at 1020/1490

[Yanakitu Tenatako]

What is wrong with monero payouts on pool?
on 18/janaury I got only 3.368 with hashrate over 70 khash/sec ?! It should be around 9 XMR, like days before.

[alekki]

Hello.
New user on pool. Please confirm numbers (seems low a bit
ETH 170mh(6 gpu rig) - 0.42089892(4 eur) per 24h?

MultiPoolMiner shows ~0.008BTC(6.7 eur) per 24h

MultiPoolMiner is not accurate or pool issue?

[aaronsace]

Hello.
New user on pool. Please confirm numbers (seems low a bit
ETH 170mh(6 gpu rig) - 0.42089892(4 eur) per 24h?

MultiPoolMiner shows ~0.008BTC(6.7 eur) per 24h

MultiPoolMiner is not accurate or pool issue?

Are you mixing up the BTC/Day and BTC/GH/Day? They don't match on your post.

The MultiPoolMiner figures are taken from the pool. MultiPoolMiner also makes use of 24 average but stable pools like Ethereum are mostly live.

Where are you getting the figures from as there are no 24 hour stats available?

[alekki]

Hi,
BTC/Day ~ 0.008 for 170Mh
Ok lets see how it goes today
Tnx for the reply, can we expect version 2.4 today?

PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard

[aaronsace]

Hi,
BTC/Day ~ 0.008 for 170Mh
Ok lets see how it goes today
Tnx for the reply, can we expect version 2.4 today?

PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard

Apologies about they delays. I noticed a bug so I'll have another go tonight.

The estimates change like every 5 minutes. I'm hoping that 24 hour actual figures are added at some point to MiningPoolHub.

[alekki]

My stats average 6 gpu rig rx480:
ETH: 170
Zec: 1600
XMR: 4500

Auto exchange is set to bitcoin.

Software screens:

 Type: {AMD, NVIDIA}

Miner    Algorithm    Speed BTC/Day BTC/GH/Day Pool
-----    ---------    ----- ------- ---------- ----
Claymore Ethash    170 MH/s 0.00790    0.04665 MiningPoolHub


   Type: AMD

Miner    Algorithm    Speed BTC/Day  BTC/GH/Day Pool
-----    ---------    ----- -------  ---------- ----
Claymore Equihash    2 KH/s 0.00825 5,227.95492 MiningPoolHub   <---- curent mining, giving most profit (auto switching ON)
Claymore Cryptonight 5 KH/s 0.00769 1,694.09777 MiningPoolHub

As I said before it's ~ 0.008 BTC by software

What I get from the pool is much less now.

That's the question could I estimate at least ~0.007-8 BTC with no downtimes ?

[aaronsace]

My stats average 6 gpu rig rx480:
ETH: 170
Zec: 1600
XMR: 4500

Auto exchange is set to bitcoin.

Software screens:

 Type: {AMD, NVIDIA}

Miner    Algorithm    Speed BTC/Day BTC/GH/Day Pool
-----    ---------    ----- ------- ---------- ----
Claymore Ethash    170 MH/s 0.00790    0.04665 MiningPoolHub


   Type: AMD

Miner    Algorithm    Speed BTC/Day  BTC/GH/Day Pool
-----    ---------    ----- -------  ---------- ----
Claymore Equihash    2 KH/s 0.00825 5,227.95492 MiningPoolHub   <---- curent mining, giving most profit (auto switching ON)
Claymore Cryptonight 5 KH/s 0.00769 1,694.09777 MiningPoolHub

As I said before it's ~ 0.008 BTC by software

What I get from the pool is much less now.

That's the question could I estimate at least ~0.007-8 BTC with no downtimes ?

Did you actually run it for 24 hours or have you just opened it after being down for hours? I've fixed that bug in the new version as it giving to much weighting the first reading.

What does the 'MiningPoolHub_Equihash_Profit.txt' contain?
5,227 BTC/GH/Day sounds about right to me for a daily average but it will be static for a few hours if it is that bug.

You can calculate it yourself:
1.57 KH/s x 5,227 BTC/GH/Day = 0.00825 BTC
(I know it says 2 KH/s on the software because it's rounded; is fixed in the next version. )

[miningpoolhub]

no result
100% notification does not work
my miner is still offline for half a day - no email.
/xmr

Sorry for late reply.

Hmm...
Maybe in spam folder?
I've tested with it several times but worked well.

Can you leave your workername that didn't receive email?

Keep in mind that pool sends only one email per worker until that rig join to pool again.

[miningpoolhub]

miningpoolhub,

would it be possible to implement a feature to set a percentage at which newly mined coins are auto-exchanged?
Example: Currenty when mining XMR and setting auto-exchange to BTC, all newly mined XMR will be exchanged to BTC. But what if I don't want all my XMR to be exchanged? Not possible. With this feature you could set e.g. auto-exchange 50%. That means, 50% of my mined coins will stay on my XMR wallet and the other 50% will be transferred to the auto-exchange wallet.
What do you think?

cheers

Great idea.
I'll implement that. It will satisfy other miners too who asked about turning off specific coin exchange.

Thanks.

[miningpoolhub]

Hello Miningpoolhub

I have 17 x GTX 1070 mining zcash with you, last payment was 03 UTC, now at 17:40 UTC i have 0 zcash and 0 BTC exchanged and there as been no payments so far.

what is going on?, i am mining at a constant 6000 Sols, and blocks has been found, several of them in that time.

can you please investigate?, my username in that account is lightman
thank you
indkt.

Sorry for late reply.
I found that your zcash credits were correctly logged.

Auto exchange is delayed time to time. Sometimes pool withdraw them 4~6 hour interval but sometimes it takes more to reduce withdrawal fee.

Sorry for inconvenience. I'll monitor auto exchange flow more frequently.

[miningpoolhub]

Any ETA for adding LBRY?

+1
LBRY would be nice! is doing very good on NVIDIA GPUs right now

I'm afraid that I can't say specific ETA for now as I'm doing other coin pool work and I haven't even look into LBRY codes.
What I know is that LBRY is python based and it may need additional works to make it compatible with current pool environment.

Anyway I'll do works everyday, one by one.

Thanks.

[miningpoolhub]

What is wrong with monero payouts on pool?
on 18/janaury I got only 3.368 with hashrate over 70 khash/sec ?! It should be around 9 XMR, like days before.

There are two reasons.

(1) Monero pool is still small, rewards fluctuate time to time.
    block height 1226278 took more than 6 hours.
    https://monero.miningpoolhub.com/index.php?page=statistics&action=blocks&height=1226685&prev=1

    I see that last 24 hours, 7 days stats seems in normal range. So you get more some day, get less the other day.
    It will be better when pool gets bigger.

(2) Reward calculation was stopped due to some little error which needed admin to check.
     There was some delay for XMR credit too


Sorry for inconvenience.
Thanks.