[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[miningpoolhub]

still waiting for email answer ....

mining xmr during 18 hours , hashrate 4260 h/s stable , and yesterday only get 0.21 xmr ... it must be close to 0.40 , what happen night before 1st febrary  (gmt+1) the day before what ok !

4260h/S = around 0.50 / day (depend of difficulty)

something not right, i mined xmr today, an half day and daily average income 1.72 xmr  but have only 0.42    
nothing wrong in the pool luck

Last 24 Hours    720    40    39    0    6,439,512,952.1795    15696312821    15808406580    100.71%

edit ouch i did not 12 hour yet was 10       so now it's an half day for 0.674  but  still not great  half day is 0.86 (and increasing in last hours)

maybe there was some good luck before i started and i had bad luck in my half day

Last 24 Hours    720    39    39    0    6,383,417,819.2051    15559580934    18440825187    118.52%

Block luck fluctuates daily.
I haven't found any problem from monero mining pool.

How much monero is expected at Pool page for your hashrate? (XMR/Day column)
https://monero.miningpoolhub.com/index.php?page=statistics&action=pool

That numbers are based on math and it is using same factor from Blocks page.
It's 103.29% for last 24 hours, 102.02% for last 7 days, which means miners are getting appropriate earnings as Pools page expected.

I think you will get correct earnings in a long term. It can fluctuate daily but it pays correctly as how much you contribute.
Just check whether your hashrate is reported correctly and have lower reject rate.

[miningpoolhub]

no difficulty can't lower so bad our profits , there is fake shares and probably something more ... smelling scam , but with unfair and fake reason :"something went wrong"

fuck off i was thinking this pool was good before

This pool is like my child these days. I've been watching this baby growing for about 3 years now.

I don't do scam things. I even try to pay more if there were some problem.
I work hard behind the scene, checking every possible vulnerabilities like fake share or accidental server faults.

I'm sorry that you got lower than expected, but that can happen from any pool with this hashrate size.
Miningpoolhub's Monero pool is new, need more hash now.

I hope you understand this. I can confirm that you will get expected earnings in a long run.

Monero block stats are beautiful today.
https://monero.miningpoolhub.com/index.php?page=statistics&action=blocks

I hope you get back and mine together.

[miningpoolhub]

Hi!

Im new to mining and at Multipool i have a hard time to navigate since its auto-switching.
Right now i have rented some hash from nicehash and pointed to.
Scrypt hub.miningpoolhub.com Port 12001
X11 hub.miningpoolhub.com     Port 12007.

Both workers is on auto, i can only see the hashing speed from nicehash.
Where do i on hub.miningpoolhub.com check my hashpower and my shares?

I have choosen to auto-exchange into BTC if that matters.

Just trying out for fun right now!

Since you are using auto-switching, you have to do a bit of clicking to check your hashrate and shares.........at least until the pool owner makes some planned changes to the home page.

First click on "auto-switches" at the top left of any page, then look to see which coin your auto-switch pool is mining at that moment. Next click on that coin and then click "dashboard" to see your hashrate. You can also click on pool or blocks for more info if needed.

Since you are new to mining, I'd suggest you do a bit of investigation about which algo or coin to mine at any point in time. Whattomine and Coinwarz will help. miningpoolhub's scrypt pools are very small with few coins or miners, which can hurt your profit(I say profit, but serious doubt any profit exists in scrypt). X11 is often very similar. Right now the ETH, Equihash, and Crytonight profit should be better...........assuming you make wise hash rental decisions. Good luck

Thank you for your detailed instruction.
I planned to make "one page to check whole mining hashrate across all coins", but it's constantly delayed due to new works. (new coin launching, monitoring, fixes, wallet updates, performance optimization)

I think I have to work harder now. 

[miningpoolhub]

Hi!

Im new to mining and at Multipool i have a hard time to navigate since its auto-switching.
Right now i have rented some hash from nicehash and pointed to.
Scrypt hub.miningpoolhub.com Port 12001
X11 hub.miningpoolhub.com     Port 12007.

Both workers is on auto, i can only see the hashing speed from nicehash.
Where do i on hub.miningpoolhub.com check my hashpower and my shares?

I have choosen to auto-exchange into BTC if that matters.

Just trying out for fun right now!

When renting hash, you are best using the 17xxx ports for auto switching. No setup required.

I was about to write this info but found your exactly same answer I was thinking.

[aaronsace]

Anyone know why MultiPoolMiner reports these URLs but they don't resolve US or Europe.

http://europe.feathercoin.miningpoolhub.com/
http://europe.ethash-hub.miningpoolhub.com/
http://europe.digibyte-groestl.miningpoolhub.com/
http://europe.gamecredits.miningpoolhub.com/
http://europe.maxcoin.miningpoolhub.com/
http://europe.groestlcoin.miningpoolhub.com/
http://europe.vcash.miningpoolhub.com/
http://europe.maxcoin.miningpoolhub.com/
http://europe.digibyte-skein.miningpoolhub.com/

Mining should not use http:// protocol. (It should use stratum+tcp://)
Also ethash, equihash, cryptonote algo have explicit region server hostname.
just use hub.miningpoolhub.com for mining other algo coins.

I believe the coin profit API needs updating as they reported this as an issue with MultiPoolMiner when using the coin pools instead of the algorithm pools. Think the http is a typo in the post but the server addresses are from the API.

[flowjob]

Vcash is trading again on Poloniex. Could it be re added to Auto Exchange?

[miningpoolhub]

Anyone know why MultiPoolMiner reports these URLs but they don't resolve US or Europe.

http://europe.feathercoin.miningpoolhub.com/
http://europe.ethash-hub.miningpoolhub.com/
http://europe.digibyte-groestl.miningpoolhub.com/
http://europe.gamecredits.miningpoolhub.com/
http://europe.maxcoin.miningpoolhub.com/
http://europe.groestlcoin.miningpoolhub.com/
http://europe.vcash.miningpoolhub.com/
http://europe.maxcoin.miningpoolhub.com/
http://europe.digibyte-skein.miningpoolhub.com/

Mining should not use http:// protocol. (It should use stratum+tcp://)
Also ethash, equihash, cryptonote algo have explicit region server hostname.
just use hub.miningpoolhub.com for mining other algo coins.

I believe the coin profit API needs updating as they reported this as an issue with MultiPoolMiner when using the coin pools instead of the algorithm pools. Think the http is a typo in the post but the server addresses are from the API.

Ah.. my bad.
I fixed it.

[miningpoolhub]

Vcash is trading again on Poloniex. Could it be re added to Auto Exchange?

Yes, but I will enable auto exchange one or two days later as vcash will hardfork within 24 hours.
Network may split at this hardfork.

[merlinsbeard]

Still loving this pool! You can really tell how much work you put into it.

I just want to throw my support for a DCR pool here. I strongly believe in its mission and dev team. Charles Lee also said ETH/XMR/DCR have good dev teams. I believe it has more growth potential than SC or LBRY.

Thanks again

[miningpoolhub]

Still loving this pool! You can really tell how much work you put into it.

I just want to throw my support for a DCR pool here. I strongly believe in its mission and dev team. Charles Lee also said ETH/XMR/DCR have good dev teams. I believe it has more growth potential than SC or LBRY.

Thanks again

I too belive that ETH/XMR/DCR devs are good.
I will add DCR, LBRY one by one.

Thank you for suggestion.

[induktor]

It's gonna be one shitty day for zcash today  crap!, freaking variance!

[MacMan314]

Hello!  First off, I really like what you've done with this mining website.  I've been mining for about 3 months and I've had great success, and your hard work shows.

Do you have an estimate on when you'll be updating the DASH wallet to 12.1?

Here's a cool page showing who's switched and who hasn't: https://dashpay.atlassian.net/wiki/display/DOC/Mining+pools

[Yanakitu Tenatako]

@miningpoolhub admin

Again, what is wrong with MONERO payouts, I get less than half of what should ?!?!

I got 7.80568624 in last 24 hrs, I should get 13 XMR.
For 10XMR payout it tool a 32 hours to earn, it is almost half. Where are XMR coins gone?

Please fix this, or I will leave pool.
I am always in top 5 miners. Not jumping from pool to pool, but this is really heavy for my wallet.

[aaronsace]

@miningpoolhub admin

Again, what is wrong with MONERO payouts, I get less than half of what should ?!?!

I got 7.80568624 in last 24 hrs, I should get 13 XMR.
For 10XMR payout it tool a 32 hours to earn, it is almost half. Where are XMR coins gone?

Please fix this, or I will leave pool.
I am always in top 5 miners. Not jumping from pool to pool, but this is really heavy for my wallet.

Your payout is correct for the last 24 hours of found blocks. I think you are misunderstanding how mining works; you get shares in what coins are found. It uses the term 'shares' on your dashboard: https://monero.miningpoolhub.com/index.php?page=dashboard

As you can see the last 24 hours is 38% unlucky but the all time luck is only 5% unlucky:
https://monero.miningpoolhub.com/index.php?page=statistics&action=blocks

Just keep mining and it will level out over time; the next couple of days could be lucky but the stats show that it is working.
The more big miners that this pool gets then the lower the variance in luck between days.

The Monero pool has been running for 6 weeks, please help it grow.

[induktor]

Hi miningpoolhub guys

I don't see credited blocks 59943 and 60015 , it's already bad enough that it took almost 24 hours to find a block, and after that, it has not been credited, what is going on?

can you please investigate? (username: lightman )
thanks
indkt.

[BorginBitsnTits]

I just started using this the other day, and I am fairly comfortable with computers in general, I do know some scripting language from playing text based games or writing triggers for zmud.

I have been mining for a few months, at the onset of monero. 

I have a 1050 TI x 5 and +1 970 GTX rig,
1050 TI at work
A RX 470 paired with a 6 core AMD waiting for more units I am ordering and finally a 3960x intel which I am looking for a x79 board to do a hybrid CPU/GPU build maybe even make my own personal computer upgrade / miner.

So not a long time vet, but I am not exactly a noob either.

BUT I do want to say its a bit underwelming to me, the instructions which are supplied in the downloads or on website.  How you configure things with MPH client for example.  sgminer doesnt work at all, ive never used it.. the help file is obnoxious when you load.  I tried in a batch, i na config, at the end of the file, tOK, I saw this setting information that SG miner asks for in the claymore readme files.  OK.  I dont know where it goes it still, a batch file? a command?  How do i Make it execute in conjunction with the miner.   If i make a config file that seems to read it, but what about all the kernel files.   What if I dont want to use that miner and had a different one.  I understand the hub switching but I can use others ports, and pools but then what happens to my currency? Also eth dual mining, no decred info on the website or ability to check balances.  When you say 17xxx do i really leave that, and the rest is magic.. in the copy and paste when do i change usernames and dont I.

Yeah the whole config files and json files are new to me, and I dont get how I have .1 zclassic on exchange, or what that means.  Thats confusing to.   Where  Ifigured I could come for help and guides its all people posting pools and what not, im not trying to read 100 pages of old data!!  The fundamentals of  this system or links to similar systems would be handy.   If nothing else the miner control is nice, I just can only use it for a couple coins.

I also get big red fails on eth dual, its got to be a config issue at this point but that dual mining has a lot to it.. so in time ill figure it out im sure! but hopefully my coins miined go someplace I can use them.  I am using my suprnova account and wallet addie so one can hope.

The struggle is real, but for everyone else it sounds like its pretty good.  Thanks for your work on this, I do like it and once i figure out how to use the miner control interface than maybe ill look at the other stuff!

Thank you

[aaronsace]

I just started using this the other day, and I am fairly comfortable with computers in general, I do know some scripting language from playing text based games or writing triggers for zmud.

I have been mining for a few months, at the onset of monero. 

I have a 1050 TI x 5 and +1 970 GTX rig,
1050 TI at work
A RX 470 paired with a 6 core AMD waiting for more units I am ordering and finally a 3960x intel which I am looking for a x79 board to do a hybrid CPU/GPU build maybe even make my own personal computer upgrade / miner.

So not a long time vet, but I am not exactly a noob either.

BUT I do want to say its a bit underwelming to me, the instructions which are supplied in the downloads or on website.  How you configure things with MPH client for example.  sgminer doesnt work at all, ive never used it.. the help file is obnoxious when you load.  I tried in a batch, i na config, at the end of the file, tOK, I saw this setting information that SG miner asks for in the claymore readme files.  OK.  I dont know where it goes it still, a batch file? a command?  How do i Make it execute in conjunction with the miner.   If i make a config file that seems to read it, but what about all the kernel files.   What if I dont want to use that miner and had a different one.  I understand the hub switching but I can use others ports, and pools but then what happens to my currency? Also eth dual mining, no decred info on the website or ability to check balances.  When you say 17xxx do i really leave that, and the rest is magic.. in the copy and paste when do i change usernames and dont I.

Yeah the whole config files and json files are new to me, and I dont get how I have .1 zclassic on exchange, or what that means.  Thats confusing to.   Where  Ifigured I could come for help and guides its all people posting pools and what not, im not trying to read 100 pages of old data!!  The fundamentals of  this system or links to similar systems would be handy.   If nothing else the miner control is nice, I just can only use it for a couple coins.

I also get big red fails on eth dual, its got to be a config issue at this point but that dual mining has a lot to it.. so in time ill figure it out im sure! but hopefully my coins miined go someplace I can use them.  I am using my suprnova account and wallet addie so one can hope.

The struggle is real, but for everyone else it sounds like its pretty good.  Thanks for your work on this, I do like it and once i figure out how to use the miner control interface than maybe ill look at the other stuff!

Thank you

I recommend MultiPoolMiner. Enter your username and it will start benchmarking then mining. You are best waiting for the benchmarks to complete as it may popup with security warnings. It will then use the most profitable miners that work on your system.

Set the auto exchange coin on MiningPoolHub so that you get paid in just one single currency.

[ipominer]

Use caution with the VCash pool - it has been mining on its own fork for 2+ days. Miningpoolhub is at VCash block 599895 currently while the rest of the network is at 600754:

https://vcash.miningpoolhub.com/index.php?page=statistics&action=pool

https://explorer.vchain.info/block/0b16579188afdad895bf77f2606808e80836b44c5a403e8ae3af70b31973f93b
https://www.blockexperts.com/xvc/height/600754

[lucasan123]

my adzcoins vanished...........i had 4 of them and there is only 0,5 now........

edit: ok seems to be restored.......

[not.you]

helo,

Is it just me , or has anyone else problems with monero block confirmation??
since midday i have 20 - 30 blocks that not be confirmed

here is only the "first" page:

I came here to ask about the same thing.  Nothing has been added to my confirmed balance for many hours.  Also, how is it that multiple blocks are awaiting the same number of confirmations, or that older blocks need more confirmations than newer ones?