[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin

[darkstar0021]

Marucoin kernel bug:
270,280x and 290 runs well. but 5870&6750 failed to start.

please updata. thx

[1713579907]

1713579907

[1713579907]

1713579907

[1713579907]

1713579907

[1713579907]

1713579907

[Amph]

I am getting Failed to init GPU thread 0.  I have an Nvidia 780Ti in my top slot and I have a Radeon 5850 in the bottom one. I am trying to run this on the 5850. I have ran X11 no problem on it but this doesn't work.

Thanks,
Griff

this is what I am getting

[14:20:59] Kernel marucoin is experimental.
[14:20:59] Unable to open marucoin.cl or ./kernel/marucoin.cl for reading
[14:20:59] Failed to init GPU thread 0, disabling device 0
[14:20:59] Restarting the GPU from the menu will not fix this.
[14:20:59] Try restarting sgminer.
Press enter to continue:

it seems that the kernel marucoin, isn't present in the kernel folder

[MarcusDe]

Hi,

I used sph miner just after marucoin kernel was added and it worked out-of-the-box.
I have APU and 4 280X rig, you dont have to disable APU, it works great for displaying desktop ;-)
You can use only those devices you want from miner command line.

f.e.: -d 1-4 --remove-disabled

[dragonmike]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

[Amph]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

it was 2.65 now 2.7?  it's k anyway, i'm at 2.55 on default settings(1100core)

[dragonmike]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

it was 2.65 now 2.7?   it's k anyway, i'm at 2.55 on default settings(1100core)

Hehe yeah, I was doing 2.65 @ 1200/1500, now running 1210/1800 seemed to have given a little bit more juice
As far as I can see on these forums, it seems to be pretty okay.

I running it on my PC only at the moment. My mining rig (6x Asus R9 280X DC2T-3GD5) is running on Pimp 1.4 (which doesn't support x13 yet). I'm going to upgrade to 1.4.2, that should allow me to run x13, yet at lower speeds until they implement the mod.

EDIT: 2.73 @ 1225/1800. Been running stable for a while now. Don't think I'll push it higher, it'll just crash the driver.

[Amph]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

it was 2.65 now 2.7?  it's k anyway, i'm at 2.55 on default settings(1100core)

Hehe yeah, I was doing 2.65 @ 1200/1500, now running 1210/1800 seemed to have given a little bit more juice
As far as I can see on these forums, it seems to be pretty okay.

I running it on my PC only at the moment. My mining rig (6x Asus R9 280X DC2T-3GD5) is running on Pimp 1.4 (which doesn't support x13 yet). I'm going to upgrade to 1.4.2, that should allow me to run x13, yet at lower speeds until they implement the mod.

sadly nvidia are still better than us on x11, even with free electricity

[HammerHedd]

I'm having issues compiling the miner. When I ./configure, I get this:

Code:

------------------------------------------------------------------------
sgminer 4.1.0
------------------------------------------------------------------------


Configuration Options Summary:

  Use git version......: yes
  libcurl(GBT+getwork).: Enabled: -lcurl  
  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: NOT FOUND. GPU mining support DISABLED
configure: error: OpenCL not found

I've got the APP-SDK installed, and I installed boinc-amd-opencl to try to fix this. My cl.h header is located at /opt/AMDAPP/include/CL. I have a strange feeling that the config file is just not finding cl.h, but I'm not sure how to fix it.

[Grifftech]

I am getting Failed to init GPU thread 0.  I have an Nvidia 780Ti in my top slot and I have a Radeon 5850 in the bottom one. I am trying to run this on the 5850. I have ran X11 no problem on it but this doesn't work.

Thanks,
Griff

this is what I am getting

[14:20:59] Kernel marucoin is experimental.
[14:20:59] Unable to open marucoin.cl or ./kernel/marucoin.cl for reading
[14:20:59] Failed to init GPU thread 0, disabling device 0
[14:20:59] Restarting the GPU from the menu will not fix this.
[14:20:59] Try restarting sgminer.
Press enter to continue:

marucoin.cl is in the kernel folder

it seems that the kernel marucoin, isn't present in the kernel folder

[Grifftech]

The updated fork from Lasybear is no running my HD 5850, but it is running at 400 kh/s, wonder if that is about all I will get

[hellyeahent]

Hi, Im using this: http://cryptomining-blog.com/2496-new-sgminer-fork-for-x11-mining-with-higher-performance/

with -darkcoin and 280x got nice boost and 290 too but 290 crashes badly after few hours (tried even 947/1250 and still). Any good coinfig for 290 ?

[Grifftech]

The updated fork from Lasybear is no running my HD 5850, but it is running at 400 kh/s, wonder if that is about all I will get

Nevermind did some tweaking and over 800kh/s now. Plus having VTC SGminer running in the background didn't help

[paulus51]

guys can anyone help me with the right settings for MSI GTX750 1 GB gamers series ?


i am on " darkcoin"  protocol an i see 30.56 Kh ??  isnt that verry low for this kind of card ?

[K1773R]

guys can anyone help me with the right settings for MSI GTX750 1 GB gamers series ?


i am on " darkcoin"  protocol an i see 30.56 Kh ??  isnt that verry low for this kind of card ?

use cudaminer/ccminer

[kenshirothefist]

FYI : there is now unified, improved version of sgminer, including all sph-miner features and more, take a look here: https://bitcointalk.org/index.php?topic=632503.0

[dhsc19]

FYI : there is now unified, improved version of sgminer, including all sph-miner features and more, take a look here: https://bitcointalk.org/index.php?topic=632503.0

This is the answer I've been waiting for!  Thank you!

[syrota]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

And you can put a batch file? I have a maximum of 1.5mh (R9 280x)
Thanks.

[fedmahnkassad]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

And you can put a batch file? I have a maximum of 1.5mh (R9 280x)
Thanks.

I am very interested to know as well. I am mining Boost also atm with r9 280xs and my rate is 1.62 mh/s with the following batch:

sgminer.exe -k marucoin -o stratum+tcp://boost.monsterhash.me:3333 -u user.worker -p pass -I 20 --gpu-engine 1080 --gpu-memclock 1500 --shaders 2048 --gpu-powertune 20 --temp-target 76 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

[ekoice]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

And you can put a batch file? I have a maximum of 1.5mh (R9 280x)
Thanks.

I am very interested to know as well. I am mining Boost also atm with r9 280xs and my rate is 1.62 mh/s with the following batch:

sgminer.exe -k marucoin -o stratum+tcp://boost.monsterhash.me:3333 -u user.worker -p pass -I 20 --gpu-engine 1080 --gpu-memclock 1500 --shaders 2048 --gpu-powertune 20 --temp-target 76 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

read a bit there => https://bitcointalk.org/index.php?topic=623409.0
with a r9 280x on x13 i get 2.7 mh/s...on x11 I get 3.3 mh/s.
so, u better take a look around that topic, you will find a LOT of useful configs with that modded version of sph-sgminer. cheers.

[syrota]

Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?

And you can put a batch file? I have a maximum of 1.5mh (R9 280x)
Thanks.

I am very interested to know as well. I am mining Boost also atm with r9 280xs and my rate is 1.62 mh/s with the following batch:

sgminer.exe -k marucoin -o stratum+tcp://boost.monsterhash.me:3333 -u user.worker -p pass -I 20 --gpu-engine 1080 --gpu-memclock 1500 --shaders 2048 --gpu-powertune 20 --temp-target 76 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

read a bit there => https://bitcointalk.org/index.php?topic=623409.0
with a r9 280x on x13 i get 2.7 mh/s...on x11 I get 3.3 mh/s.
so, u better take a look around that topic, you will find a LOT of useful configs with that modded version of sph-sgminer. cheers.

Thanks! I have 2.6Mh. Super!