[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin

[justkili]

Hello together.
Im pretty new to mining.
Before i came here, i mined Dogecoin with Multiminer (GUI) but since it dropped so hard i wanted to change.
Since i only worked for now with a GUI i wishd for some help.

I downloaded the SPH SGMiner from here (DRK only) and configured it as good as i could as newby.

My GPU
"ASUS ROG MATRIX-R9280X-P-3GD5 Platinum"

My start.bat
"sgminer.exe --kernel darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u justkili.justme -p asdf -I 13 -g 2 -w 256 --thread-concurrency 8192"

I´m actually getting 1.7Mh/s on like 50C with this configuration.

Can anyone help me improve my Mh/s pls ?

[1714860205]

1714860205

[1714860205]

1714860205

[count_cyrpto]

Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.

[Amph]

Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.

this version is not efficient at all

[count_cyrpto]

Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.

this verison is not efficient at all

Right, but what's the alternative?

X13 seems to be really profitable right now.

[Amph]

Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.

this verison is not efficient at all

Right, but what's the alternative?

X13 seems to be really profitable right now.

there are some guys getting like 1.7 i think, you should take a look at the x13mod thread

or try to install 14.4 plus the mod -g2 -I 13/ -I 18

other users have experienced some issues, then after a format their issue were gone

some times you are forced to do it...

[count_cyrpto]

Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.

this verison is not efficient at all

Right, but what's the alternative?

X13 seems to be really profitable right now.

there some guy getting like 1.7 i think, you should take a look at the x13mod thread

Yeah, thanks for the heads up. I'm trying the 14.4 drivers right now, to see if that works.

[infofront]

I'm trying to use PHM's sph-sgminer. I'm trying to mine X11 coins using my R9 290s and I keep ending up with "Error: clSetKernelArg of all params failed."

[CoinBuzz]

Guys,

Why i am not getting any accepted share in X13 (marucoin) ?

[fonzerrellie]

I'm trying to test run the xll/mod miner and having no luck connecting  was testing on cloak at dedicated with their stratum and worker etc everything looked good but everything ended up in the hv:  and I wasn't seeing any "accepted"??

I'm just running a 6950 on windows lol I'm probably missing something pretty simple, any help ??

I was getting 1.3 m/h's out of my 6950 on a x11 coin... will the OG X11 miner work on AXIS

really want to get on it from start

[Amph]

talkcoin isn't added yet here?

[badman74]

talkcoin isn't added yet here?

I am pretty sure phm stopped working on this a while back

[bronan]

I have been trying to get this working but whatever i do i see no accepted shares appear on pools
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:

Have been trying 4 different x13 coins and all same result

sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128

sgminer -k x13mod and same settings

tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes

It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all

At some pools the miner simply goes into idle mode reporting nothing todo

[restless]

older cards have to use -k x13modold

[nanoprobe]

I have been trying to get this working but whatever i do i see no accepted shares appear on pools
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:

Have been trying 4 different x13 coins and all same result

sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128

sgminer -k x13mod and same settings

tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes

It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all

At some pools the miner simply goes into idle mode reporting nothing todo

I noticed some of your posted settings have the wrong syntax. I highlighted them because you don't have a space between the letter and the number.
Here are my 7970 settings that I've used on several X13 coins

sgminer -k x13mod -o stratum+tcp://boost2.suprnova.cc:3311 -u login credentials -p password -I 19 -g 4 -w 128
(I don't use gpu-clock or mem-clock settings in the bat file. I create a conf file and change settings from there) TC or shader settings are not needed for X13 and should be set to 0.

If these settings still produce the problems you mentioned then something else is wrong.
Hope this helps.

I can post my conf file if that would help.

[lagur]

Hey guys, I'm having a issue where 1 of my GPU has low hashrate... though I feel like its going to SICK state but it's really stable.

 - AMD 13.1mod drivers
 - USB risers
 - 8gb ram

Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.

I'll continue re-arranging the positions of the slot but last time still the same.

Is there something I miss?

[Starscream]

Hey guys, I'm having a issue where 1 of my GPU has low hashrate... though I feel like its going to SICK state but it's really stable.

 - AMD 13.1mod drivers
 - USB risers
 - 8gb ram

Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.

I'll continue re-arranging the positions of the slot but last time still the same.

Is there something I miss?

Run a stress test on it and see the results.

[wanksta11]

I can't mine at all even on a pool it keep saying
"waiting for work to be available from pools"

[qinyasu]

Have a new version of the chicken blood?

[testwin7all]

how to set para for amd HD 6750

[maniacmusic]

This is a great miner for altcoins, I am getting good speeds on MYR and GRS with this one..