tevador
Newbie
Offline
Activity: 23
Merit: 6
|
|
December 07, 2019, 10:24:26 AM |
|
I noticed that this miner internally uses the RandomX library without complying with the license terms. Copyright (c) 2018-2019, tevador <tevador@gmail.com>
Copyright (c) 2014-2019, The Monero Project
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Please add the above text to the release archive of your miner.
|
|
|
|
doktor83 (OP)
|
|
December 07, 2019, 11:19:23 AM |
|
I noticed that this miner internally uses the RandomX library without complying with the license terms. Please add the above text to the release archive of your miner. I will add it to the readme.txt i provide with the miner, like i added for WinIO.
|
|
|
|
dazzmore
Newbie
Offline
Activity: 26
Merit: 0
|
|
December 07, 2019, 08:05:26 PM |
|
Hi Dok, what's the vega 56 settings for Kadena?
27/64/1 Oh, do you know what clock speed/memory and voltage?
|
|
|
|
|
doktor83 (OP)
|
|
December 13, 2019, 10:16:41 AM |
|
Yeah, the guys user account got hacked. Idk why there's no 2FA added to the forum.
|
|
|
|
alexcrys1
Newbie
Offline
Activity: 60
Merit: 0
|
|
December 14, 2019, 08:37:22 AM |
|
Yeah, the guys user account got hacked. Idk why there's no 2FA added to the forum. why do you think it is not? My acc. was hack like many others..and nothing happened ...they are afraid
|
|
|
|
doktor83 (OP)
|
|
December 16, 2019, 10:51:07 PM |
|
V0.1.9 beta+ Added RandomSFX algorithm (SafexCash) + RandomX algorithm/s improvements + Added RandomX algorithm/s extra tweak that can increase hashrate + Added parameter --disable-randomx-tweaks + Fixed K12 algorithm + --cpu-priority now affects main process too (not just worker threads) + default --cpu-priority is now 2 (below normal) + bug fixes + added license text to readme for RandomX and WinRing0 - Added RandomSFX for SafexCash mining - Following the trends : MSR registers values editing to control hw prefetching. Just run miner with administrator privileges, it should detect & set things automatically. RandomX algorithms only. A big thanks to Sech1 and others who found this nice tweak. - If you dont want to use the RandomX tweaking, run miner without administrator privileges or add --disable-randomx-tweaks to your start.bat
|
|
|
|
doktor83 (OP)
|
|
December 19, 2019, 03:34:20 PM |
|
V0.2.0+ Added RandomV algorithm (MoneroV) + Added --randomx-use-tweaks , to select the MSR tweak/s to apply + Added RandomX tweak support for Intel Core2 processors About --randomx-use-tweaksIf miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable. Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use. There are at the moment : Intel - 1 tweak Amd - 4 tweaks Index starts from 0, so you have 0 1 2 3 for options on AMD. Here's an example : + Use tweaks number 0 and 3 (dont use 1 and 2) SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03 The order of tweaks doesn't matter, so writing 03 is same as 30. What you should do is to find which tweak, or combination of tweaks, makes the problems. You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc. Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. ) So start with : SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0 If it runs without crashing for some time, try the next one : SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1 and so on, until you find the one that makes the trouble. Then try combining tweaks to find a combination that works for you.
|
|
|
|
|
tvukoman
Jr. Member
Offline
Activity: 69
Merit: 5
|
|
December 27, 2019, 09:42:36 PM |
|
hi Doktor!
I'm back to your miner. Used to mine with GPU and SRBMiner.
Now GPU mine ETH, but i try CPU Core i3 8100 with multi randomx, (autoconfig) and have resulted with 1920 H/s on average.
Is it ok result for this cpu and algo, and is it some better profitable coin for cpu mining?
Please advice me, stuck with cryptonight algo coins for years, never look any other algo...
Keep up a good work!
txs
|
|
|
|
WhyMe
|
|
December 30, 2019, 03:49:49 AM Last edit: December 30, 2019, 04:07:16 AM by WhyMe |
|
I'm curious to know how you try to detect that !? I'm doing nothing, miner switch between 3 pools because of pool problems. The 3 pools are the same, only the port change. EDIT1 Using bbc01.bbcpool.io EDIT2 Same on another rig And from what I see in my logs, miners have not been restarted in this period.
|
|
|
|
doktor83 (OP)
|
|
December 30, 2019, 05:50:31 AM Last edit: December 30, 2019, 06:35:03 AM by doktor83 |
|
Are you using some kind of a local proxy?
Edit: probably solved, one of the devfee pools could cause the trouble. Let's wait and see if it happens again.
|
|
|
|
WhyMe
|
|
December 30, 2019, 03:15:37 PM |
|
No proxy. But we are just losing our time with this, bbc is just like a big joke ...
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
|
January 02, 2020, 11:54:39 PM |
|
Hey dok , how about defyx algo ? its cpu minable
|
|
|
|
bigslimvdub
|
|
January 18, 2020, 09:05:00 PM |
|
when CUDA support?
|
|
|
|
doktor83 (OP)
|
|
January 19, 2020, 10:33:53 AM |
|
|
|
|
|
doktor83 (OP)
|
|
January 20, 2020, 03:47:33 PM Last edit: January 20, 2020, 04:18:16 PM by doktor83 |
|
V0.3.0+ First version for Linux (Tested on Ubuntu 18.04) + Removed RandomV (MoneroV) algorithm + Added 'defyx' algorithm (Scala) + Added 'yespoweritc' algorithm (Intercoin) + Added 'cryptonight_catalans' algorithm (CatalansCoin) + Added 'cryptonight_talleo' algorithm (Talleo) + --randomx-use-tweaks accepts now values from 0-4, [ 0 - Intel, 0,1,2,3,4 - AMD ] + Added parameter 'worker' to pools config and cmd parameters -> defines worker name for RPC2 + a lot of bug fixes Finally a version for linux users too! Still lacks a few options (like gpu temp etc monitoring), but it will be implemented. I am expecting a lot of bugs, so if you have any bug reports don't hesitate Defyx is ~100% faster than XLARig Also for users who have issues with MSR mods + older Ryzens, try adding this to cmd : --randomx-use-tweaks 0134
|
|
|
|
doktor83 (OP)
|
|
January 22, 2020, 10:22:48 AM |
|
V0.3.1
+ Fixed ERROR 0x4002
Just a small fix, for some of you who were getting this error. Hopefully it is now fixed.
|
|
|
|
Herry Toms
Jr. Member
Offline
Activity: 236
Merit: 1
|
|
January 22, 2020, 05:24:52 PM |
|
New network launch
-MBCs (MicroBitcoin) which haven't been moved since hardfork will be burned. (There is approximately 2,700,000 BTC activated so far from the 525,001 block) -Locking up the 50% of the premined contributors' MicroBitcoin. (Almost 5,000,000,000 MBC will be technically locked up until 2021.) -Maximum Supply will be almost 61,000,000,000 MBC. It will be different according to the snapshot amount. -Reward for first block of new network will be changed from 12,500 MBC to 5,500 MBC. And reward for each new block will be calculated using the function in the document below. -To make network more reliable, prevent block spamming and create better fee market, block size will be decreased to 300kb. -New PoW lgorithm - modified YesPower (sha256 replaced with blake2b) You can read more about new network in following this post https://mbc.wiki/d/31-new-network-launch Your new miner for rainforestv2 algorithm was perfect. But there is an update on the MBC. Will you support the new algorithm for MicroBitcoin ? Yes, i will. CPU miner will be ready, for GPU part i am not even sure that there will be one, as yespower is GPU unfriendly What do you think mining RandomX coins with RagerX which can increase hashrate about 10%? Is it make sense.
|
|
|
|
doktor83 (OP)
|
|
January 22, 2020, 06:02:28 PM |
|
i dont understand the question, and the quote. Totally unrelated.
|
|
|
|
|