SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[doktor83]

V0.6.8
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU

[skablast]

Doktor, I think you do speak with the Hiveos people.
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you

oh, sorry, with the 0.67 the disable works again

[doktor83]

Doktor, I think you do speak with the Hiveos people.
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you

oh, sorry, with the 0.67 the disable works again

actually you just put that parameter where you put the rest

[fmz89]

been long time not use this miner, i like the miner api for easy & simple http monitoring, well the development going really well

adding so much new algo in the current moment..is there any idea about infinite cache on new motherboard & rx 6000 series take advantage this new tech

its feel like vega at first time they using compute mode lol, and after couple months than miner full utilize the gpu's

[remark78]

Please help,

I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.

After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.

Your firewall/antivirus is blockin miner from accessing the devfee pool probably

When the miner connects to devfee pool and what is its address?
The firewall/antivirus should not be a problem because it leaks properly haven.herominers.com.

Please help me, I can't solve the problem with devpool, my miner pause mining every 2-3 hours.
What's the IP address of devpool?

[doktor83]

Please help,

I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.

After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.

Your firewall/antivirus is blockin miner from accessing the devfee pool probably

When the miner connects to devfee pool and what is its address?
The firewall/antivirus should not be a problem because it leaks properly haven.herominers.com.

Please help me, I can't solve the problem with devpool, my miner pause mining every 2-3 hours.
What's the IP address of devpool?

For haven it's also herominers, so something must be blocking the outgoing devfee connection.

[buny]

this shows the pool:
Hash Rate    1 Hour            6 Hour            24 Hour    
117.92 MH/s   141.52 MH/s   157.71 MH/s   157.62 MH/s   

it shows the program:
[2021-02-26 01:01:42] GPU0 : 49.21 MH/s
[2021-02-26 01:01:42] GPU1 : 57.19 MH/s
[2021-02-26 01:01:42] GPU2 : 49.86 MH/s
[2021-02-26 01:01:42] GPU3 : 57.36 MH/s
[2021-02-26 01:01:42] Total: 213.62 MH/s
[2021-02-26 01:01:42] ==========================================================
[2021-02-26 01:01:42] GPU0 : [T:  57c RPM: 1891 CC: 1150MHz MC: 2050MHz]
[2021-02-26 01:01:42] GPU1 : [T:  47c RPM: 1161 CC: 1050MHz MC: 2000MHz]
[2021-02-26 01:01:42] GPU2 : [T:  50c RPM: 1309 CC: 1050MHz MC: 1975MHz]
[2021-02-26 01:01:42] GPU3 : [T:  57c RPM: 1207 CC: 1050MHz MC: 2000MHz]

QUESTION: who is lying?

[eviltuna]

What's a good coin to mine these days? I've been out of the loop for a while.

[remark78]

CPU Ryzen 5 2600 cannot mining ERGO (Autolykos2)?

[ManicMiner276]

V0.6.8
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU

Not working for me in Ubuntu 20.04

./SRBMiner-MULTI: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory

v0.6.7 worked OK.

[Xdragon]

Hello Doktore

I have problem with autolykos2

Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just  few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....  

Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.

Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when  hashrate drops  

Hashrate drop is confirmed on pool

Also power consumption is lower on your miner

I use hiveos. I tried 0.6.8 and same.

[doktor83]

Hello Doktore

I have problem with autolykos2

Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just  few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....  

Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.

Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when  hashrate drops  

Hashrate drop is confirmed on pool

Also power consumption is lower on your miner

I use hiveos. I tried 0.6.8 and same.

and have you tried manually setting the --gpu-intensity parameter to a lower value ?

[Xdragon]

No, I did not set any extra parameters except --disable-cpu

I left rigs without restarting miners for more than 24h, and on some rigs hashrate got back where it was(at the same time, on two different internet providers), and on other rigs where hashrate was normal - hashrate got lower at the same time as on rigs where hashrate went up(also some rigs are on one ISP, some on other)

What --gpu-intensity value you suggest?



edit:
All problems resolved with version 0.6.9

[doktor83]

V0.6.9
+ Added algorithm 'verthash' for CPU & GPU mining, fee 1.25%
+ Performance increase on 'autolykos2' algorithm on GPU's (~1-6%)
+ Performance increase on 'autolykos2' algorithm on CPU's with AVX2 (run as admin/root) (~25%)
+ Reduced power consumption on 'autolykos2' algorithm on Vega GPU's
+ Small improvements on 'rx2' algorithm
+ Minor bug fixes

[mollov]

Hi,

I'm trying to run MULTI 0.6.9 with SMOS and mining XHV... without any tweaks (default run) I get lower hashrate compared to TeamRedMiner...

tried "--gpu-auto-tune" but with either value 1 or 2, one or more GPUs crashed few seconds into the auto tune... same MHz as with TRM.... even tried way lower GPU MHz with lower MEM Mhz and still one or more GPUs are crashing during the auto tune... ideas?

[entryboy]

Hi doctor83,

the version 0.6.9 does not work with 2x Fiji (Radeon pro duo, 0.6.8 is ok). I try normal and admin mode. CPU mining is disables (5950x).

SRBMiner-MULTI.EXE --disable-cpu --algorithm autolykos2 --pool stratum+ssl://ergo-eu1.nanopool.org:11433 --wallet "mywallet.worker2 is secret"


[2021-03-05 21:24:09] Job received [222e] block height 438917 [autolykos2][0]
[2021-03-05 21:24:11] GPU [BUS:0a] dataset created in 3425 ms [autolykos2]
[2021-03-05 21:24:11] Error -54 [clEnqueueNDRangeKernel [2]] [[BUS:0a] (Thread 0)]
[2021-03-05 21:24:11] Error -54 [clEnqueueNDRangeKernel [2]] [[BUS:0a] (Thread 0)]
[2021-03-05 21:24:11] Error -54 [clEnqueueNDRangeKernel [2]] [[BUS:0a] (Thread 0)]
[2021-03-05 21:24:11] Error -54 [clEnqueueNDRangeKernel [2]] [[BUS:0a] (Thread 0)]
[2021-03-05 21:24:11] Error -54 [clEnqueueNDRangeKernel [2]] [[BUS:0a] (Thread 0)]
...

Edit: same with an other system (with Fiji included).


Question2: is it right, that an AMD 5950x 16 core cpu (32 threads) only reach 14 MH/s (huge pages is enabled, 32 GB Ram)?


Thanks. 

[bensatrio8]

hello everyone,

Yesterday I have "pool unexpectedly closed the connection" on autolykos2 every 2-3 hours,
Can you explain what is the fix for that? Because I have clear the windows defender for the files.

I tried to change into SSL port, and it won't connect. I restart the .bat file manually (normal port) and it works, but the problem appear after next 2-3 hours.
Is that because I turn off the screen? I have turn off the sleep setting, and display turn off after 15 minutes.

Sorry for my bad english.
Thanks

[Littlegrand]

I am giving SRB a go from TRM to mine Haven.  

I am using rx 570/580 4gb but can only get between 7-800h/s where on TRM I get 900-1000h/s.  

Any idea what settings I can change?  Currently I only use autotune 1 and use boost 3

Thanks

[doktor83]

V0.7.0
+ Reduced power consumption on 'autolykos2' algorithm for Ellesmere GPU's ~2-3%
+ Reduced power consumption on 'verthash' algorithm for Ellesmere GPU's ~5%
+ Reduced power consumption on 'verthash' algorithm for Vega GPU's ~10%
+ Performance increase on 'verthash' algorithm for Vega GPU's ~3%
+ Performance increase on 'verthash' algorithm for CPU's ( ~5% )
+ Added parameter '--verthash-dat-path'
+ Fixed 'verthash' algorithm stack smash issue
+ Fixed watchdog not triggering on dead GPU issue
+ Fixed crash on 'panthera' algorithm
+ Removed parameters : --gpu-watchdog-disable-mode, --watchdog-rounds
+ Minor bug fixes

[rainbowminer]

+ Added parameter '--verthash-dat-path'

Thank you!