SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[Kareli]

I like SrbMiner but for Monero mining Xmrig works better than SrbMiner every time I try.
I would use Xmrig for Monero mining

[1714771401]

1714771401

[1714771401]

1714771401

[1714771401]

1714771401

[1714771401]

1714771401

[BoozyTalking]

XDAG mining not work.

[2022-10-23 11:25:48] Working on algorithm 1 jobs
[2022-10-23 11:26:21] Job received [9660276362041737726] [xdag][1]
[2022-10-23 11:26:23] RX Cache   initialized on node 0 [HP] [xdag]
[2022-10-23 11:26:23] RX Dataset initialized on node 0 [HP] [xdag]
[2022-10-23 11:26:23] RX Initialization time on node 0 : 2411 ms [xdag]
[2022-10-23 11:27:03] CPU result sent to pool [xdag][1]
[2022-10-23 11:27:03] Pool unexpectedly closed the connection [xdag]
[2022-10-23 11:27:03] Reconnecting to xdag.org:13656 in 5 seconds [xdag]
[2022-10-23 11:27:07] Connected to xdag.org:13656 [xdag]
[2022-10-23 11:27:23] CPU result sent to pool [xdag][1]
[2022-10-23 11:27:23] Pool unexpectedly closed the connection [xdag]
[2022-10-23 11:27:23] Reconnecting to xdag.org:13656 in 5 seconds [xdag]
[2022-10-23 11:27:27] Connected to xdag.org:13656 [xdag]

Also FiroPow not work with coins which use FiroPow (except Firo coin).

[doktor83]

V1.1.1
+ Added algorithm 'evrprogpow' (EVRMORE coin) for CPU/GPU mining, fee 0.85%
+ Performance increase on 'cryptonight_gpu' algorithm for RDNA/RDNA2 GPU's
+ Performance increase on 'sha512_256d_radiant' algorithm for RDNA2 GPU's
+ Performance increase on 'lyra2v2_webchain' algorithm for GPU's
+ Progpow algorithms bugfixes [kawpow, firopow, epic, sero, veil, veriblock, zano]
+ Added parameter '--force-msr-tweaks' which forces usage of MSR tweaks for CPU mined algorithm/s *
+ Added support for gfx1036
+ Fixed detection of RX550 GPU's on newer AMD drivers

***
MSR tweaking was enabled by default for every algorithm on previous miner versions if miner had admin/root privileges.
Not every CPU mineable algorithm benefits from this, so from this version it will be automatically enabled only to algorithms that are known to benefit from it.
If one wants to force enable MSR tweaking it can be done adding '--force-msr-tweaks' parameter

[doktor83]

V1.1.2
+ Added algorithm 'sha256dt' (NOVO coin) for CPU/GPU mining, fee 0.85%
+ Added ETHASH/ETCHASH + SHA256DT dual mining mode
+ Added AUTOLYKOS2 + SHA256DT dual mining mode
+ Lowered devfee for 'sha512_256d_radiant' algorithm to 0.85% (CPU/GPU)
+ Reworked auto-tune procedure for GPU's
+ Added parameter '--gpu-disable-interleaving' which disables interleaving of threads (only when same GPU runs 2+ threads) - might get better hashrate in some cases
+ --gpu-buffer-mode 1 should work more stable on 4GB GPU's now
+ Bug fixes & minor improvements

[Dowper_]

RX 5700 XT - Kaspa Hashrate & Profit (Dual Ergo+KAS) - https://www.youtube.com/watch?v=xirEDGJ0gHg
RX 5700 XT - Vertcoin Hashrate & Profit - https://www.youtube.com/watch?v=d6SA7_LcJWU
My tests - RX 5700 XT with SRBMiner.

RX 570 8GB - Kaspa Hashrate & Profit (Dual Ergo+KAS) - https://www.youtube.com/watch?v=dom6KjmPoxk
My tests - RX 570 8GB with SRBMiner.

[doktor83]

RX 5700 XT - Kaspa Hashrate & Profit - https://www.youtube.com/watch?v=xirEDGJ0gHg
RX 5700 XT - Vertcoin Hashrate & Profit - https://www.youtube.com/watch?v=d6SA7_LcJWU
My tests - RX 5700 XT with SRBMiner.

Thanks for the videos, appreciate it!

[doktor83]

V1.1.3
+ Fixed miner crashing on ETHASH/ETCHASH + KASPA/HEAVYHASH dual mining options that appeared in previous version [ 1.1.2 ]
+ Added parameters '--a0-start-script' and '--a1-start-script' which run a user defined script every time algorithm 0 or 1 become active*
+ Added parameter '--start-script-delay' which delays mining for x seconds after a0 or a1 startup script was executed

***
Apply different OC settings every time an algorithm switch happens!

--a0-start-script and --a1-start-script is only for GPU's, and ONLY if using --multi-algorithm-job-mode 3 (which is automatically used when mining ZIL)
--start-script-delay can be used to define a delay (in seconds) that is applied after the script was run, but before mining resumes

[BoozyTalking]

Hi, Doktro83. Yescryptr16 algo not work on RX580 gpu, please fix it.

[doktor83]

Hi, Doktro83. Yescryptr16 algo not work on RX580 gpu, please fix it.

last time you also said xdag not working but there was no issue with it at least for other people who were/are mining it.

can you describe 'not working' please ?

[BoozyTalking]

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

[sxemini]

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

And what miner version you are using for Xdag? Really hard to help you with zero information.
My first test on xdag = it is working = i will test it deeper but i am sure all is fine.
Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

aunt edit says:

XDAG mining work flawless - the failure by BoozyTalking is a wrong wallet - a wrong wallet results in the reconnecting failure after every sent job to the pool.

If i have more time later, i will look into the Firo failure - but i think it is also an failure by BoozyTalking

[BoozyTalking]

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

And what miner version you are using for Xdag? Really hard to help you with zero information.
My first test on xdag = it is working = i will test it deeper but i am sure all is fine.
Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

1.0.9 - Xdag. 1.1.1 not work for me also. Can you provide your command line for Xdag.

Mine is:
SRBMiner-MULTI.exe --multi-algorithm-job-mode 3 --disable-gpu --algorithm randomepic;xdag --pool 51pool.online:4416;xdag.org:13656 --wallet ************;ZgSUDwUv0V2YpWIrbM69q58iZRDg7gLH --cpu-threads 8;8 --password *******;x --worker ;R2700Pro --keepalive true;false --retry-time 5 --max-no-share-sent 1600

[BoozyTalking]

Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

What GPU you use?

[sxemini]

Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

What GPU you use?

Tested on serveral GPU´s - mostly polaris pendants from the smallest to the biggest.

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

And what miner version you are using for Xdag? Really hard to help you with zero information.
My first test on xdag = it is working = i will test it deeper but i am sure all is fine.
Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

1.0.9 - Xdag. 1.1.1 not work for me also. Can you provide your command line for Xdag.

Mine is:
SRBMiner-MULTI.exe --multi-algorithm-job-mode 3 --disable-gpu --algorithm randomepic;xdag --pool 51pool.online:4416;xdag.org:13656 --wallet ************;ZgSUDwUv0V2YpWIrbM69q58iZRDg7gLH --cpu-threads 8;8 --password *******;x --worker ;R2700Pro --keepalive true;false --retry-time 5 --max-no-share-sent 1600

Why you don´t set a worker for epic mining? " ;R2700Pro"

this is my commandline for testing xdag

SRBMiner-MULTI.exe --disable-gpu --algorithm xdag --pool xdagmine.com:13654 --wallet ****************** --worker srbminer --cpu-threads 2

why so much extra arguments? You really need them? I don´t think so. Keep the commandline easier. If it works, then you can start to add some extra arguments.

[BoozyTalking]

Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

What GPU you use?

Tested on serveral GPU´s - mostly polaris pendants from the smallest to the biggest.

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

And what miner version you are using for Xdag? Really hard to help you with zero information.
My first test on xdag = it is working = i will test it deeper but i am sure all is fine.
Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

1.0.9 - Xdag. 1.1.1 not work for me also. Can you provide your command line for Xdag.

Mine is:
SRBMiner-MULTI.exe --multi-algorithm-job-mode 3 --disable-gpu --algorithm randomepic;xdag --pool 51pool.online:4416;xdag.org:13656 --wallet ************;ZgSUDwUv0V2YpWIrbM69q58iZRDg7gLH --cpu-threads 8;8 --password *******;x --worker ;R2700Pro --keepalive true;false --retry-time 5 --max-no-share-sent 1600

this is my commandline for testing xdag

SRBMiner-MULTI.exe --disable-gpu --algorithm xdag --pool xdagmine.com:13654 --wallet ****************** --worker srbminer --cpu-threads 2

why so much extra arguments? You really need them? I don´t think so. Keep the commandline easier. If it works, then you can start to add some extra arguments.

Problem not in extra params, problem is what miner can't connect to pool. And we use different pools.

[doktor83]

GPU is working, stats show hashrate, but no shares is found (tested about 30 minits),
with same difficulty (0.2) even celeron J1900 (which hashrate is less about 10 times)
can found 10-20 shares.

About Xdag - that miner version i use at that moment not work.

And what miner version you are using for Xdag? Really hard to help you with zero information.
My first test on xdag = it is working = i will test it deeper but i am sure all is fine.
Second i tested yescryptR16 on a GPU = success shares found and all working flawless.

Tested with 1.1.3

1.0.9 - Xdag. 1.1.1 not work for me also. Can you provide your command line for Xdag.

Mine is:
SRBMiner-MULTI.exe --multi-algorithm-job-mode 3 --disable-gpu --algorithm randomepic;xdag --pool 51pool.online:4416;xdag.org:13656 --wallet ************;ZgSUDwUv0V2YpWIrbM69q58iZRDg7gLH --cpu-threads 8;8 --password *******;x --worker ;R2700Pro --keepalive true;false --retry-time 5 --max-no-share-sent 1600

It cant connect because you are trying to connect to a non existent host:port.
It's pool.xdag.org:13656 or 116.202.3.220:13656 you could at least spend 15 sec and check that on their page : https://xdag.org/setup?pool_id=2

[doktor83]

If i have more time later, i will look into the Firo failure - but i think it is also an failure by BoozyTalking

Actually if he was talking about StakeCube coin (don't know he never gives any information except 'not working'), then he was right, it's not working cause they dont use FIROPOW parameters , their period is different. I got that info from zpool admin. So i dont know why they say they use FIROPOW when .. its not.

[sxemini]

Problem not in extra params, problem is what miner can't connect to pool. And we use different pools.

This was not my question, but ok. You need help, but you don´t accept the help. For me it works like a charm with every pool - so in my opinion the problem sitting in front of the screen. And you write: "we" so your partners also do something wrong.
If you want help, begin to accept other meanings. Start mining with no extra parameters and single mining. When it works - add more parameters you really need.

So for me it works, the developer write it works.

[doktor83]

V1.1.4
+ Added support for gfx1100 (RDNA3 : RX 7900) GPU's
+ Fixed hashrate regression on 'autolykos2' algorithm for Vega/Ellesmere GPU's that was introduced unintentionally in an earlier version
+ Renamed '--adl-disable' parameter to '--gpu-sensors-disable'
+ Minor bug fixes

[FP91G]

V1.1.4
+ Added support for gfx1100 (RDNA3 : RX 7900) GPU's

Where can I see the mining test data for the RX 7900 video card?