SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[alphaTigris]

V2.5.2
+ Added algorithm 'randomscash' [Satoshi Cash] for CPU mining, fee 1.00%
+ Performance improvement on algorithm 'fishhash' for AMD Rx400/500 GPU's

Code:

SRBMiner-MULTI.exe --algorithm randomscash --pool eu.rplant.xyz:7019 --wallet scash-wallet

randomepic also broken in 2.5.2. 100% result validation failed. 2.5.1 works fine.

[zertor]

Algorithm 'fishhash' is broken for 4060 Ti, always throw worker thread stopped working immediately.
(at default/ or any settings even with slight  reduced core & memory clocks)
Tried 2.5.2 and 2.5.1, with the same results.

And there is nothing wrong with the hardware, other algos works fine.
And a different miner app also works fine with 'fishhash'.

The same is for RX5600XT too.

[wolverine5pl]

Meopow algo works on my 5700xt but not on 6600xt. Any idea why.

[FP91G]

Meopow algo works on my 5700xt but not on 6600xt. Any idea why.

My crystal ball is busy mining, so I don't know what operating system you have.
Have you tried looking at the miner logs?

[wolverine5pl]

Meopow algo works on my 5700xt but not on 6600xt. Any idea why.

My crystal ball is busy mining, so I don't know what operating system you have.
Have you tried looking at the miner logs?

Hiveos. No haven't need to check how to get it. When i shell to miner no errors come up

[miner29]

I cant get srbminer to work on an Arc 770 gpu.  Works fine with another miner running same algo (kawpow) but get cli error -61 on srb.  Tried with cli disabled command line but fails with (no device for mining).  Running mmpOS.  Any ideas?  Latest driver for intel and previous no difference.

I can say i am not a fan of intel gpus.

[wolverine5pl]

Meopow algo works on my 5700xt but not on 6600xt. Any idea why.

My crystal ball is busy mining, so I don't know what operating system you have.
Have you tried looking at the miner logs?

error -6 when creating qptr for gpu1

any idea why

[doktor83]

V2.5.3
+ Added algorithm 'randomtuske' [Tuske Network] for CPU mining, fee 0.85%
+ Added algorithm 'xelishash' [Xelis] for CPU mining, fee 0.85%*
+ Minor performance improvement on 'randomx' based algorithms
+ DevFee for 'randomscash' algorithm lowered to 0.85%
+ Fixed mining on AMD BC-250 for algorithms : AUTOLYKOS2, AUTOLYKOS2/BLAKE3_ALEPHIUM/BLAKE3_DECRED, ETHASH/BLAKE3_ALEPHIUM, ETHASHB3/BLAKE3_ALEPHIUM, FISHHASH/BLAKE3_ALEPHIUM
+ Fixed invalid shares on a few algorithms broke in previous version
+ Minor bug fixes

***
Xelishash right now supported only for CPU mining, GPU support is [work in progress].
Tested on BaikalMine, K1pool, Vipor and Xelpool.

[doktor83]

Meopow algo works on my 5700xt but not on 6600xt. Any idea why.

My crystal ball is busy mining, so I don't know what operating system you have.
Have you tried looking at the miner logs?

error -6 when creating qptr for gpu1

any idea why

You dont have enough system RAM probably.

[doktor83]

V2.5.4
+ Added support for GPU mining algorithm 'xelishash' [Xelis] on AMD GPU's, fee 2.0%
+ Performance improvement on algorithm 'xelishash' for CPU's
+ Fixed mining of algorithm 'blake3_decred' broke in previous version
+ Minor bug fixes

[Lutsenko_78]

Hello.

System:

CPU0: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]
CPU1: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]

Total 36 Cores, 72 Threads

SRBMiner-MULTI 2.5.4
Algoritm - Yespowersugar

With default settings using only 12 threads (CPU0 - 6, CPU1 - 6) , Avg - 1368 H/s

The --cpu-threads and --cpu-affinity commands only applies to CPU0. CPU1 is not working.
How to correctly write these commands to enable physical 36 cores on two CPU?

[dianasta]

Hello,

I'm using hiveos and set to kawpow on Unmineable pool, but keep getting these errors below, please let me know if you have any idea what is the issue?

Code:

Miner:   srbminer
Version: 2.5.4

srbminer exited (exitcode=127), waiting to cooldown a bit
Skipping miner log rotation due to execution time < 30sec

Detecting GPU devices...
[2024-05-24 21:08:03] Couldn't get active devfee pools - check your internet/firewall!
[2024-05-24 21:08:03] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...
[2024-05-24 21:09:29] Couldn't get active devfee pools - check your internet/ firewall!
[2024-05-24 21:09:29] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...

Regards.

[doktor83]

Hello.

System:

CPU0: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]
CPU1: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]

Total 36 Cores, 72 Threads

SRBMiner-MULTI 2.5.4
Algoritm - Yespowersugar

With default settings using only 12 threads (CPU0 - 6, CPU1 - 6) , Avg - 1368 H/s

The --cpu-threads and --cpu-affinity commands only applies to CPU0. CPU1 is not working.
How to correctly write these commands to enable physical 36 cores on two CPU?

Run 2 miner instances, bound each instance to a different node (cpu0, cpu1). then you can set affinity per cpu

[doktor83]

Hello,

I'm using hiveos and set to kawpow on Unmineable pool, but keep getting these errors below, please let me know if you have any idea what is the issue?

Code:

Miner:   srbminer
Version: 2.5.4

srbminer exited (exitcode=127), waiting to cooldown a bit
Skipping miner log rotation due to execution time < 30sec

Detecting GPU devices...
[2024-05-24 21:08:03] Couldn't get active devfee pools - check your internet/firewall!
[2024-05-24 21:08:03] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...
[2024-05-24 21:09:29] Couldn't get active devfee pools - check your internet/ firewall!
[2024-05-24 21:09:29] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...

Regards.

It is written there. Miner can't connect to srbminer.com to get the list of devfee pools. Either you/firewall is blocking it, or your ISP.

[dianasta]

Hello,

I'm using hiveos and set to kawpow on Unmineable pool, but keep getting these errors below, please let me know if you have any idea what is the issue?

Code:

Miner:   srbminer
Version: 2.5.4

srbminer exited (exitcode=127), waiting to cooldown a bit
Skipping miner log rotation due to execution time < 30sec

Detecting GPU devices...
[2024-05-24 21:08:03] Couldn't get active devfee pools - check your internet/firewall!
[2024-05-24 21:08:03] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...
[2024-05-24 21:09:29] Couldn't get active devfee pools - check your internet/ firewall!
[2024-05-24 21:09:29] make sure you have 'wget' installed on your system!

srbminer exited (exitcode=0), waiting to cooldown a bit

Detecting GPU devices...

Regards.

It is written there. Miner can't connect to srbminer.com to get the list of devfee pools. Either you/firewall is blocking it, or your ISP.

Thanks it was a DNS resolve issue. I did the following:

Code:

echo “nameserver 8.8.8.8” | sudo tee /etc/resolv.conf > /dev/null

Regards.

[doktor83]

V2.5.5
+ Added support for mining 'xelishash' algorithm on INTEL ARC GPU's
+ Added support for dual mining FISHHASH/KARLSENHASH on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Performance improvement on algorithm 'xelishash' for AMD GPU's and AVX2 CPU's [up to ~13% depending from gpu]
+ Minor bug fixes

[Lutsenko_78]

Hello.

System:

CPU0: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]
CPU1: Intel(R) Xeon(R) CPU E5-2697 V4 @ 2.30GHz [L3:46080 KB][L2:4608 KB][L1:579 KB][PU: 36]

Total 36 Cores, 72 Threads

SRBMiner-MULTI 2.5.4
Algoritm - Yespowersugar

With default settings using only 12 threads (CPU0 - 6, CPU1 - 6) , Avg - 1368 H/s

The --cpu-threads and --cpu-affinity commands only applies to CPU0. CPU1 is not working.
How to correctly write these commands to enable physical 36 cores on two CPU?

Run 2 miner instances, bound each instance to a different node (cpu0, cpu1). then you can set affinity per cpu

How to bind each instance to a different node (cpu0, cpu1)?

[doktor83]

V2.5.6
+ Added algorithm 'flex' [Kylacoin] for CPU mining, fee 2.0%
+ Added algorithm 'randomxeq' [Equilibria] for CPU mining, fee 0.85%

[doktor83]

How to bind each instance to a different node (cpu0, cpu1)?

on linux with numactl

[Lutsenko_78]

How to bind each instance to a different node (cpu0, cpu1)?

on linux with numactl

Write a command line example for Windows or HiveOs.