tom14cat14
|
|
May 02, 2014, 11:00:20 PM |
|
Do any of you guys plan on getting ROI? Every time I plug something in it shows no chance. I guess I could make some assumptions that price will go back up or difficulty will slow down but I do not think that would be wise. If I buy a miner it will be form spondoolies.
|
|
|
|
solarion
|
|
May 02, 2014, 11:12:02 PM |
|
You are welcome to follow this thread, then , and get updated. Thanks, I do understand the site's mechanics. I have loosely followed this thread, but not having seen a direct answer to my question I chose to inquire. Somebody mentioned a gen 3 product as the point in which spondoolies will hopefully provide in hand equipment rather than pre-order or built to order gear, I'll check back at that time.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 03, 2014, 06:36:18 AM |
|
You are welcome to follow this thread, then , and get updated. Thanks, I do understand the site's mechanics. I have loosely followed this thread, but not having seen a direct answer to my question I chose to inquire. Somebody mentioned a gen 3 product as the point in which spondoolies will hopefully provide in hand equipment rather than pre-order or built to order gear, I'll check back at that time. What question wasn't answered ? If you'll order SP10 now, it will be shipped between May 10 and May 15 Apply for 10% coupon (show a previous order from other manufacturer or even us) by email sales@spondoolies-tech.comYou can get ~3TH/s in less than two weeks for $7,200: http://www.spondoolies-tech.com/products/2-units-of-sp10-dawson-may-batchIt's 2.4$/GHs for the most efficient machine in the market.
|
|
|
|
Collider
|
|
May 03, 2014, 07:19:09 AM |
|
I contacted spondoolies regarding my view on the groupbuy vs early bundle offer and they have worked with me to make me happy.
Please excuse my cluttering of the thread with arguments, i felt very strongly about the topic at the time.
I think the guys at spondoolies are very sensible and hard-working, having the satisfaction of every customer in their minds.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 03, 2014, 07:21:49 AM |
|
I contacted spondoolies regarding my view on the groupbuy vs early bundle offer and they have worked with me to make me happy.
Please excuse my cluttering of the thread with arguments, i felt very strongly about the topic at the time.
I think the guys at spondoolies are very sensible and hard-working, having the satisfaction of every customer in their minds.
Thank you for your kind words. We're trying our best.
|
|
|
|
Somekindabitcoin
|
|
May 03, 2014, 07:30:46 AM |
|
You guys have DIY kits along with your 187 gh/s chips and your third gen pickaxe ones? If you don't have the kits, how much for the chips in bulk? I'm thinking around 10-1000 chips. Could you pm me the price for em? Thanks.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 03, 2014, 07:44:10 AM |
|
You guys have DIY kits along with your 187 gh/s chips and your third gen pickaxe ones? If you don't have the kits, how much for the chips in bulk? I'm thinking around 10-1000 chips. Could you pm me the price for em? Thanks.
RockerBox (our 2nd gen ASIC) brief is attached: https://www.dropbox.com/s/c65ebuvoh5sek2f/rockerbox_brief.pdfWe're TO in a week. The following data is based on final postLO Engine results: Voltage 0.63 V Total Engines 193 Max frequency at TT corner 984 MHz Performance 190 GHs Power 66 W Power/performance 0.35 W/GHs (At the SP30 system level we're at 0.43 W/GHs) We don't have DIY kits. Please contact sales@spondoolies-tech.com for ASIC or SP30 boards bulk purchases. We'll release SP30 files to allow quick custom development. PickAxe (our 3rd gen ASIC) is still in development. It will be available in Q4. Our design goals are much more aggressive than RockerBox.
|
|
|
|
SyRenity
|
|
May 03, 2014, 08:16:03 AM |
|
Please PM me with your IP and your ISP name, so I could check the matter with the Shopify support. Thanks.
|
|
|
|
Collider
|
|
May 03, 2014, 03:36:46 PM Last edit: May 03, 2014, 04:29:21 PM by Collider |
|
As the sp10s you can currently order for May will be shipped until the 15th, i think it is legitimate to classify them as made-to-order, as ~12 days lead time isn´t really a preorder in my opinion Edit: two months i always confuse...
|
|
|
|
merv77
|
|
May 03, 2014, 04:17:23 PM |
|
As the sp10s you can currently order for March May will be shipped until the 15th, i think it is legitimate to classify them as made-to-order, as ~12 days lead time isn´t really a preorder in my opinion FTFY
|
|
|
|
gurki
Member
Offline
Activity: 102
Merit: 10
|
|
May 03, 2014, 10:09:46 PM |
|
Is the SP10 May batch shipment still starting next week?
|
|
|
|
DevonMiner
|
|
May 03, 2014, 10:17:36 PM |
|
Is the SP10 May batch shipment still starting next week?
Earlier today Spondoolies said: If you'll order SP10 now, it will be shipped between May 10 and May 15 I also have orders ... so we should be smiling soon. :-)
|
|
|
|
gurki
Member
Offline
Activity: 102
Merit: 10
|
|
May 03, 2014, 10:37:04 PM |
|
Is the SP10 May batch shipment still starting next week?
Earlier today Spondoolies said: If you'll order SP10 now, it will be shipped between May 10 and May 15 I also have orders ... so we should be smiling soon. :-) Thanks very much, i didn't see that post.
|
|
|
|
solarion
|
|
May 03, 2014, 10:55:58 PM |
|
Is the SP10 May batch shipment still starting next week?
Earlier today Spondoolies said: If you'll order SP10 now, it will be shipped between May 10 and May 15 I also have orders ... so we should be smiling soon. :-) Good news. Does anyone know approximate cost of shipping an sp10 to the states? I couldn't seem to get this information from the website without entering complete shipping information. $4495 + shipping for 1.4th to begin mining in a couple weeks(1.5+ difficulty adjustments) sounds like a positive roi is well into the future.
|
|
|
|
JWU42
Legendary
Offline
Activity: 1666
Merit: 1000
|
|
May 03, 2014, 11:09:51 PM |
|
Good news. Does anyone know approximate cost of shipping an sp10 to the states? I couldn't seem to get this information from the website without entering complete shipping information. $4495 + shipping for 1.4th to begin mining in a couple weeks(1.5+ difficulty adjustments) sounds like a positive roi is well into the future.
The last information I had from Gadi for single units was < $150. For shipments of 10 or more the pricing gets closer to $100.
|
|
|
|
whonesta
|
|
May 04, 2014, 12:51:47 AM |
|
Good news. Does anyone know approximate cost of shipping an sp10 to the states? I couldn't seem to get this information from the website without entering complete shipping information. $4495 + shipping for 1.4th to begin mining in a couple weeks(1.5+ difficulty adjustments) sounds like a positive roi is well into the future.
The last information I had from Gadi for single units was < $150. For shipments of 10 or more the pricing gets closer to $100. Looks like $386 to mid-west, USA. Wish KnC would have been honest about refunds missed out on the group buy discounts @ full price ROI is unlikely $8381 for 2.8 TH/s = $2.99/GH. Great looking machine but price is on the high side w/o discounts, IMHO.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 04, 2014, 02:33:18 AM |
|
Is the SP10 May batch shipment still starting next week?
Earlier today Spondoolies said: If you'll order SP10 now, it will be shipped between May 10 and May 15 I also have orders ... so we should be smiling soon. :-) Good news. Does anyone know approximate cost of shipping an sp10 to the states? I couldn't seem to get this information from the website without entering complete shipping information. $4495 + shipping for 1.4th to begin mining in a couple weeks(1.5+ difficulty adjustments) sounds like a positive roi is well into the future. Email a proof of ordering a miner from other manufacturer or us to sales@spondoolies-tech.com, and you'll get 10% coupon. Order the 2 X SP10: http://www.spondoolies-tech.com/products/2-units-of-sp10-dawson-may-batch and apply the coupon The shipping cost for two units is 386$
|
|
|
|
whonesta
|
|
May 04, 2014, 03:20:26 AM |
|
Thanks email sent and yes the $386 to mid-west USA was for 2 - SP10's I failed to mention that. WOW coupon in hand like THAT, 10 minutes on a Sunday.. now that is CS BTC style.
|
|
|
|
gurki
Member
Offline
Activity: 102
Merit: 10
|
|
May 04, 2014, 04:31:06 AM |
|
Can we run the miners hosted at the Spondoolies data center in TURBO mode?
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
May 04, 2014, 04:35:43 AM |
|
Can we run miners hosted at the Spondoolies data center in TURBO mode?
Yes
|
|
|
|
|