ANTMINER S4 Discussion and Support Thread

[bittalc1]

How do I get after a power failure, he turned on? It included only the power supply.

?

[Blazed]

This S4 has been running fine for months and today it just stopped mining. I tried resetting it back to defaults and it still does not mine. Not sure what else to try here besides a new firmware?

Part of the Kernel Log - http://pastebin.com/rhwWyY1G


Thanks in advance!

File System Version: Fri Oct 3 18:17:17 CST 2014

Edit:

I flashed the latest firmware and still have the same issues.

File System Version: Wed Apr 15 15:53:35 CST 2015

[Stoneboy]

This S4 has been running fine for months and today it just stopped mining. I tried resetting it back to defaults and it still does not mine. Not sure what else to try here besides a new firmware?

Part of the Kernel Log - http://pastebin.com/rhwWyY1G


Thanks in advance!

File System Version: Fri Oct 3 18:17:17 CST 2014

Edit:

I flashed the latest firmware and still have the same issues.

File System Version: Wed Apr 15 15:53:35 CST 2015

Somebody has a Antminier \s4 to buy??

[notlist3d]

This S4 has been running fine for months and today it just stopped mining. I tried resetting it back to defaults and it still does not mine. Not sure what else to try here besides a new firmware?

Part of the Kernel Log - http://pastebin.com/rhwWyY1G


Thanks in advance!

File System Version: Fri Oct 3 18:17:17 CST 2014

Edit:

I flashed the latest firmware and still have the same issues.

File System Version: Wed Apr 15 15:53:35 CST 2015

Somebody has a Antminier \s4 to buy??

This is not really best place for this.  It is really meant as support, if turn's into buy/sell it kills the helpfulness of the thread.

I suggest going to hardware sales area and asking.  You will have better luck there.

[P4ndoraBox7]

This S4 has been running fine for months and today it just stopped mining. I tried resetting it back to defaults and it still does not mine. Not sure what else to try here besides a new firmware?

Part of the Kernel Log - http://pastebin.com/rhwWyY1G


Thanks in advance!

File System Version: Fri Oct 3 18:17:17 CST 2014

Edit:

I flashed the latest firmware and still have the same issues.

File System Version: Wed Apr 15 15:53:35 CST 2015

Open the S4 and check if everything is still well plugged and clean.

[wikkidtt]

Is there a custom firmware for this thing yet?

[jameshav]

Running an S4 with latest firmware - runs fine for about 48 hours and then stops -  Still on network, LCD shows its hashing, IP is still the same.  I can hit it with ssh but the root password isn't working, and can hit it with the web gui and password is not working.  Reboot.  Same symptoms.  Reset to factory defaults, I can get in, change back to what it should be.  Runs fine for about 48 hours and then I can't login again.  Repeat...  This has been happening for about 10 days now.

Any ideas?

[bittalc1]

Running an S4 with latest firmware - runs fine for about 48 hours and then stops -  Still on network, LCD shows its hashing, IP is still the same.  I can hit it with ssh but the root password isn't working, and can hit it with the web gui and password is not working.  Reboot.  Same symptoms.  Reset to factory defaults, I can get in, change back to what it should be.  Runs fine for about 48 hours and then I can't login again.  Repeat...  This has been happening for about 10 days now.

Any ideas?

Maybe your pc is hacked? So maybe someone change that pass and take control of your gear, so you mine for them

[adaseb]

How much are people buying and selling these for lately?

On eBay they seem to be going for $1000 which is obviously inflated.

I know an S3 is worth like $75 this is like 4 of them so $300 + $100 for the PSU? = $400-$500 or so ?

[bittalc1]

How much are people buying and selling these for lately?

On eBay they seem to be going for $1000 which is obviously inflated.

I know an S3 is worth like $75 this is like 4 of them so $300 + $100 for the PSU? = $400-$500 or so ?

The S4's are rock solid miners. I'm running them for a year without any problems. If i sell them in near future it will be minimum 500.

[sirazimuth]

How much are people buying and selling these for lately?

On eBay they seem to be going for $1000 which is obviously inflated.

I know an S3 is worth like $75 this is like 4 of them so $300 + $100 for the PSU? = $400-$500 or so ?

The S4's are rock solid miners. I'm running them for a year without any problems. If i sell them in near future it will be minimum 500.

Yup agreed. my solo S4 has been running flawlessly for 10 months apart from this hiccup last nite.
I had noticed my S4 poolside hashrate dropped from 2 down to 1.5TH/s for like past week. (Antpool)
 i attributed my lower wallet payouts (which i monitor daily) to difficulty increase. The miner itself was showing  around 1.95 and miner status page the same.
Not low enough for me to think something amiss. So  didnt notice until I logged into antpool last nite, 1st time in a week . My dashboard daily graph which is usually flatlined at 2 ,showed a drop to
1.5  a week ago then flatlined at 1.5. Payouts not suprisingly dropped on same day.
Very strange, as my poolside hashrate until now has been a very stable  2TH for almost a year now.
Anyway I rebooted miner and all is well again. at 2.014 .Will now make it a habit to login daily to check poolside hashrate.
 Im wondering, is this normal behaviour for S4?  i suppose i cant complain, this thing has mined over 5 bitcoins since 4/2015.
dont ask me about my  electric bill, i only mine as a "hobby" lol.

[Thisiserik]

Does anyone know where I can get this replacement part PDQ

https://i.imgur.com/VD8oXWn.jpg

My baby is hurtin' 

[Laviathon]

Does anyone know where I can get this replacement part PDQ

https://i.imgur.com/VD8oXWn.jpg

My baby is hurtin'  

That is made on to the beaglebone.  If you open up the miner it just pulls out. Just make sure you do not bend the pins and there are a lot of them. Last one I changed I did not even remove the board from the miner.  just pull straight up on it.   Almost plug and play.  


https://www.bitmaintech.com/productDetail.htm?pid=00020160105102242316JqapyMif0705


$50 bucks on bitmain but paying and shipping is a hassle.  I have seen people reselling them on ebay also.. Search for beaglebone s4 or BB s4.  The firmware is miner specific I believe, same hardware for all but need to make sure it is correct for your miner.

Best of luck.

[bittalc1]

How much are people buying and selling these for lately?

On eBay they seem to be going for $1000 which is obviously inflated.

I know an S3 is worth like $75 this is like 4 of them so $300 + $100 for the PSU? = $400-$500 or so ?

The S4's are rock solid miners. I'm running them for a year without any problems. If i sell them in near future it will be minimum 500.

Yup agreed. my solo S4 has been running flawlessly for 10 months apart from this hiccup last nite.
I had noticed my S4 poolside hashrate dropped from 2 down to 1.5TH/s for like past week. (Antpool)
 i attributed my lower wallet payouts (which i monitor daily) to difficulty increase. The miner itself was showing  around 1.95 and miner status page the same.
Not low enough for me to think something amiss. So  didnt notice until I logged into antpool last nite, 1st time in a week . My dashboard daily graph which is usually flatlined at 2 ,showed a drop to
1.5  a week ago then flatlined at 1.5. Payouts not suprisingly dropped on same day.
Very strange, as my poolside hashrate until now has been a very stable  2TH for almost a year now.
Anyway I rebooted miner and all is well again. at 2.014 .Will now make it a habit to login daily to check poolside hashrate.
 Im wondering, is this normal behaviour for S4?  i suppose i cant complain, this thing has mined over 5 bitcoins since 4/2015.
dont ask me about my  electric bill, i only mine as a "hobby" lol.

Yep that happens to me also but reboot fix it. You should look at the avg 5s hash rate, not the avg. I use mmonitor from mdude.

[gt_addict]

Going to be getting an S4 soon and was wondering how you guys have dealt with the noise? I know you can underclock it but that kind of defeats the object of it. Not got to worry too much about ambient temps as I'm in the uk and rarely gets above 25c in summer.

I currently have two s3's under my desk in my room and can quite easily sleep with those on all the time so just wondering what the s4 is like in comparison.

Thanks.

[Prelude]

Going to be getting an S4 soon and was wondering how you guys have dealt with the noise? I know you can underclock it but that kind of defeats the object of it. Not got to worry too much about ambient temps as I'm in the uk and rarely gets above 25c in summer.

I currently have two s3's under my desk in my room and can quite easily sleep with those on all the time so just wondering what the s4 is like in comparison.

Thanks.

--bitmain-homemode

That will slow the fans down. Never had any issues with running them that way, and the temps arent an issue.

[gt_addict]

Where abouts do I enter those details Prelude?

Also if that doesn't work has anyone hooked up some kind of ducting to the exhaust fans (which im assuming are the noisiest?) to try and quieten them down?

Can they be stood on their sides or are things going to fall off when they get warmed up?

[gt_addict]

Anyone?

[bittalc1]

Anyone?

Read here, anyway you should edit the cgminer.sh, and if you want the homemode to work you should use  the latest firmware. But on that firmware you can not lower the voltage because is fixed on 0725.
https://bitcointalk.org/index.php?topic=956098.msg10462772#msg10462772

[gt_addict]

Anyone?

Read here, anyway you should edit the cgminer.sh, and if you want the homemode to work you should use  the latest firmware. But on that firmware you can not lower the voltage because is fixed on 0725.
https://bitcointalk.org/index.php?topic=956098.msg10462772#msg10462772

Thanks bittalc1, but that's beyond my capabilities. I am just about able to putty into my s3 and change the freq. That's about as far as my abilities go