Nice one!

Ill increase my bid to 0.185.

So now the bids stand at:
irritant ---------- 0.2
NotFuzzyWarm -- 0.2
gt_addict -----  0.185

So bids are now:-

irritant ----- 0.2
rockmoney ----- 0.18
gt_addict ----- 0.18

NotFuzzyWarm ---- has been knocked out.

Can you provide a shipping quote for the UK? I don't need the psu though. Thanks.

Looks like someone is trying to get his post count up 

Yea I'm in the UK. If you could get a shopping quote for five that would be great. Thanks.

How much for the Antminer ducts?

I was running the US AND EU versions on the dlink hub no problem.

To be honest I'm not sure. I got it from www.raspberrypi.org

I followed a guide on the raspberry pi forum (after googling it) but changed a couple of parts to "wget" and then unpacking the tar file from the gekkos site that's listed on the first page. Also it's running raspbian that I got from the raspi forum aswell. Not sure if you've done anything different but it works for me.

Its very strange that it recognises one but not the other two. Try the same process again but with a different gecko to see if it gets recognised.

Well just thought id update this.

Bought two Corsair ML120 (White LED ones as I thought they looked nice). 12v 0.3a and what do you know, its pulling the same wattage at the wall as it did before so total waste of time  

They are running at the same rpm as the old ones and resulting in roughly the same temperature on the gui.

Now the red light is flashing and cant remember if it should be flashing green when mining. It still works and registers on the pool so ill leave it for a day and see what happens to the wattage level as its only been running for 25mins.

Yea two data ports should be fine for 200m. Leave the y cables plugged in and unplug the gekkos. Leave one plugged in so it finds it and starts mining. Then plug the others in one at a time.

The price is a bit high. Considering it's efficiency compared to modern miners. But it looks in good condition. Can the modules be run independently thorough a raspi running cgminer?

You've restarted the raspi with them unplugged and plugged them in one at a time? You've got both hubs connected to the pi? As usually one side of the "Y" cable is power only and the other side transmits data and power.

In that case I bid 0.18 for my one aswell.

Fast smooth trade completed. Thanks again.

Looks good to me. Let them run at 200m for a few hours and then turn them up to 210m for a few hours. Do it in increments

Hotplug the troublesome ones a few times. One of my stickers used to take quite a few plug and unplugs. Also try restarting the raspi if it fails to recognise it completely. Turn the freq down to 200m and start them up, leave them running then restart the raspi at a higher freq. I just leave mine running at 200m for the sake of 1Gh difference it's not worth having them stopping all the time and having to restart.

Have you got an auto run setup on the raspi?

  sorry I didn't mean to be a pushy customer.

I'll be patient and wait until I hear from you when they are done and we can sort payment and delivery details