v3.7
- now miner shows current mining speed instead of total average speed. - added missed "msvcr110.dll". - "-allpools 1" is used automatically when necessary. - added "s" key to see current statistics. - some minor changes and improvements.
Cracking job. Works great. Hashrate varys with every post of stats which is nice. Previous version just slowly got worse and worse lol
|
|
|
Claymore's ZCash AMD GPU Miner. =======================
couldn’t even be bothered to change the title from Zcash to Bitcoin Gold. Ridiculous!
|
|
|
Get three 160w pico psu and connect them to a 6pin pcie cable. You could use some sort of cable connector block, then get a 6pin to 8pin EPS cable to provide the main power for the board.
|
|
|
Wrong section. You need the Altcoins section.
Hashrate wouldnt be affected my how many fans a gpu has. Temperature will be, well all depends on what fan curve you set. Personally the triple fan cards are he more expensive option and not worth the extra money for mining when it doesnt earn you anymore compared to a similar spec (amount of memory,frequencies etc) card that costs less.
|
|
|
There is a dedicated thread for these sticks:- https://bitcointalk.org/index.php?topic=1173963.0Have a good read through it. Also if you have a problem its best to give as mich detail as possible. What system its being used on, what type of usb port, powered or non-powered, what mining software are you using etc etc
|
|
|
error:- Server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10secs
use -mport 0Worked a treat. Thanks for that
|
|
|
It can be related to "msvcr110.dll" file, try to copy it from GPU miner. In 1-2 days I will release another update to fix it.
Copied it over and its running now although im getting a different error:- Server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10secs Thanks for the prompt help though
|
|
|
Yea i get that. Just seriously frustrating. Ive stopped the suspect gpu from mining in claymore and seeing how it runs. Hopefully it will prove that its this card thats the problem.
|
|
|
Well ive stopped all my other cards from mining and only had the newest (suspected problem card) running and it gave an error. So reduced the clock and increased the power and ran all the cards. Im still getting the same problem.
|
|
|
Using win10. I have the missing dll in a different software folder and tried to copy it to the cpu moner folder but still doesnt run.
The actual error im getting is:- “The ordinal 75 could not be located in the dynamic library SSLEAY32.dll” Its still present on your latest download with the remote manager and i see the file is in the remote manager folder too.
That's strange, I use Windows 10 too, tried a few different builds, but I cannot reproduce this error. DLL is not missing, it is inside of main EXE file so don't try to copy opensll into miner folder. Ive deleted and downloaded it twice and also shutdown and restarted the pc twice too. Still have the same problem
|
|
|
try newest afterburner version 4.4, you are using 4.3
Totally off topic, but just quick question: any observable improvement over the previous afterburner version? Only difference i noticed was the ability to adjust the core voltage on 1070ti cards. 4.3 wouldnt let you.
|
|
|
Thanks for thenupdate Claymore.
Im getting a problem though. SSLEAY32.dll is missing.
Version 3.5 still runs fine though.
It works fine here, what Windows version do you use? Using win10. I have the missing dll in a different software folder and tried to copy it to the cpu moner folder but still doesnt run. The actual error im getting is:- “The ordinal 75 could not be located in the dynamic library SSLEAY32.dll” Its still present on your latest download with the remote manager and i see the file is in the remote manager folder too.
|
|
|
Thanks for thenupdate Claymore.
Im getting a problem though. SSLEAY32.dll is missing.
Version 3.5 still runs fine though.
|
|
|
Thanks for the suggestions guys. Ill take a look at increase the power limit when I get home. Its running from a 1200w HP server psu woth Sidehack breakout board.
|
|
|
So currently swapping out my 1060’s on my hobby rig for 1070ti’s set a good clock for the first two 1070ti’s and it ran for days with no problems. Now i have swapped a third 1060 out for a 1070ti claymore restarts every couple of hours with illegal memory access errors. I have lowered the clock by 100 (down to +700) and its still happening.
Just cant understand why the first two cards would take it and the third causes problems. All the 1070ti’s are the same, EVGA 1070ti SC with Micron memory.
|
|
|
Ive currently got ASUS dual 1060 6gb doing eth at 23.3mh a card. EVGA 1070ti SC doing ETH at 33.1mh per card. 1070ti’s drawing approx 90w, 1060’s about 80w.
What are you mining, ETH? Yea. Mining ETH.
|
|
|
Ive currently got ASUS dual 1060 6gb doing eth at 23.3mh a card. EVGA 1070ti SC doing ETH at 33.1mh per card. 1070ti’s drawing approx 90w, 1060’s about 80w.
|
|
|
Not really worrh it in the UK due to the stupid electricity cost. Better to invest the capital in buying coins as an investment and sitting on them and hope the price goes up. If you want to have a hobby and are interested in rigs of differing nature then you may find altcoins interesting.
|
|
|
eth only on claymore... shouldn't need the +200 core , right? also anyone know if any of the previous drivers work on the 1070 ti or only the most recent?
The newest driver (388.13) only for the 1070ti as the older driver wouldnt recognise it. It also works with my older 1060 6gb aswell(more reliable than the last driver). Currently getting 32.9mh ETH with 65power, +150core, +825mem with micron memory.
|
|
|
Same here. Im paying for a dev fee and there is no dev. Even some kind of update that gives more information on the screen would be nice. Everyone knows cpu mining isnt where the money is but we still use it and some updates would be nice. I dont mind paying a fee if it actually gets used for what it says its for.
|
|
|
|