Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[adaseb]

I am the dev of Pascal Lite,

We are in need of more miners to keep the network more secure and need more miners on PASL Suprnova's pool to keep hashrate distribution equal.

If you switch from PASC to PASL you can currently earn 30% more daily profit

All you need to switch is one line

-dpool stratum+tcp://pasl.suprnova.cc:4316





Thanks in advance


References

http://whattomine.com/coins/172-pasc-pascal?utf8=%E2%9C%93&hr=1000&p=0&fee=0.0&cost=0&hcost=0.0&commit=Calculate
http://whattomine.com/coins/177-pasl-pascal?utf8=%E2%9C%93&hr=1000.0&p=0.0&fee=0.0&cost=0.0&hcost=0.0&commit=Calculate

what are the advantages of PASL that makes it better then PASC?

Well for a miners point of view, currently its more profitable to mine.

For a investors point of view, we have some types of technology that PASC doesn't. It would be better to see our thread
https://bitcointalk.org/index.php?topic=1773026

[thespycry]

Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB  (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000)
If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1

[AzzAz]

Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB  (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000)
If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1

Look for GPU mining treads to learn how to do it.
Lower gpu clock ( i.e. 1131) and raise voltage as needed . than memory clock will function. And temp has limiting factor.

[skoCe]

Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.

This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!

I tried different versions of claymore but it just stops working after a while

08:32:00:891   1208   Miner thread hangs, need to restart miner!
08:32:00:895   8d8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931   8d8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882   8b8   
08:32:00:967   8b8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972   8b8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977   8b8   GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981   8b8   GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987   8b8   GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991   8b8   GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997   8b8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004   8b8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009   8b8   Incorrect ETH shares: none
08:32:01:014   8b8   Pool switches: ETH - 0, DCR - 0
08:32:01:019   8b8   Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086   8b8   GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090   8b8   
08:32:01:961   1208   Restarting OK, exit...

[noviceminer]

@luigbren Try using Nicehash's GUI miner or Genoil's miner for ethereum and see if it works. Remember nicehash's ETH only miner uses 2% dev fee.

[GarretUA]

Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.

This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!

I tried different versions of claymore but it just stops working after a while

Same here bro

[thespycry]

Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB  (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000)
If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1

Look for GPU mining treads to learn how to do it.
Lower gpu clock ( i.e. 1131) and raise voltage as needed . than memory clock will function. And temp has limiting factor.

Yes i did look at all the Hw forums, but it was working for everyone.
Look.. it applies to first gpu only. The others are lowered from 28.1 to 27.8
http://imgur.com/g33Vn3F

[noviceminer]

Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.

This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!

I tried different versions of claymore but it just stops working after a while

08:32:00:891   1208   Miner thread hangs, need to restart miner!
08:32:00:895   8d8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931   8d8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882   8b8   
08:32:00:967   8b8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972   8b8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977   8b8   GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981   8b8   GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987   8b8   GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991   8b8   GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997   8b8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004   8b8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009   8b8   Incorrect ETH shares: none
08:32:01:014   8b8   Pool switches: ETH - 0, DCR - 0
08:32:01:019   8b8   Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086   8b8   GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090   8b8   
08:32:01:961   1208   Restarting OK, exit...

Have you tried to raise priority of EthDcrMiner64 to HIGH ?

[skoCe]

Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.

This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!

I tried different versions of claymore but it just stops working after a while

08:32:00:891   1208   Miner thread hangs, need to restart miner!
08:32:00:895   8d8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931   8d8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882   8b8   
08:32:00:967   8b8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972   8b8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977   8b8   GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981   8b8   GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987   8b8   GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991   8b8   GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997   8b8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004   8b8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009   8b8   Incorrect ETH shares: none
08:32:01:014   8b8   Pool switches: ETH - 0, DCR - 0
08:32:01:019   8b8   Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086   8b8   GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090   8b8   
08:32:01:961   1208   Restarting OK, exit...

Have you tried to raise priority of EthDcrMiner64 to HIGH ?

How do i do that?

EDIT: I figured it how, in task manager right click ther priority then high, will try with this and will report

[NetworkBS]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

[sigb0y]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

Without modding around 25MHs.

[brunodamaso]

Good day.

There is a way to change coin without stopping the mine of eth, example is mining in dcr and with a key switch to sc.

[NetworkBS]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

Without modding around 25MHs.

And will go up to 29 mh/s modding i'm right?

[Raja_MBZ]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

Without modding around 25MHs.

And will go up to 29 mh/s modding i'm right?

With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me.

However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s.

[LJLT]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

Without modding around 25MHs.

And will go up to 29 mh/s modding i'm right?

With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me.

However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s.

Hi @Raja_MBZ how you overclock using claymore?

[EastSound]

Hello BTC Members.

I have 1 question about graphics card please answer me.

This Model (XFX Radeon RS RX 480 DirectX 12 RX-480P836BM 8GB 256-Bit) https://www.newegg.com/Product/Product.aspx?Item=N82E16814150774 How many MH/s generating ethereum Today?

Without modding around 25MHs.

And will go up to 29 mh/s modding i'm right?

With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me.

However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s.

Hi @Raja_MBZ how you overclock using claymore?

You can use these commands.

-cclock   set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.
   Note: for NVIDIA cards this option is not supported.

-mclock   set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0".
   Unfortunately, AMD blocked underclocking for some reason, you can overclock only.
   Note: for NVIDIA cards this option is not supported.

-powlim set power limit, from -50 to 50. If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10".
   Note: for NVIDIA cards this option is not supported.

-cvddc   set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

[skoCe]

Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.

This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!

I tried different versions of claymore but it just stops working after a while

08:32:00:891   1208   Miner thread hangs, need to restart miner!
08:32:00:895   8d8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931   8d8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882   8b8   
08:32:00:967   8b8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972   8b8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977   8b8   GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981   8b8   GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987   8b8   GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991   8b8   GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997   8b8   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004   8b8   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009   8b8   Incorrect ETH shares: none
08:32:01:014   8b8   Pool switches: ETH - 0, DCR - 0
08:32:01:019   8b8   Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086   8b8   GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090   8b8   
08:32:01:961   1208   Restarting OK, exit...

Have you tried to raise priority of EthDcrMiner64 to HIGH ?

I did this, but miner stopped again

[noviceminer]

Try Claymore's miner using Nicehash gui to see if it works.

https://www.nicehash.com/index.jsp?p=nhmintro

[Havane]

Any idea on how to fix this keeps on happening on 480 cards

WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close

This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS.

Try ETH + PASC, it's working quite nice... with an intensity of -dcri 15

Which pascal pool do you suggest ? I tried nanopool & suprnova

[derselben]

Code:

12:30:30:451	141c	socket was closed remotely
12:30:30:451	141c	ETH: Connection lost, retry in 5 sec...

What does it mean?
-mport is disabled
Thanks!