kobazik
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 11:56:22 AM |
|
Hi, i just started mining with claymore. 5 RX480 red devils, and on of them keeps hashing low, i copy what im getting
ETH - Total Speed: 102.287 Mh/s, Total Shares: 139, Rejected: 0, Time: 01:35 ETH: GPU0 4.220 Mh/s, GPU1 24.774 Mh/s, GPU2 24.149 Mh/s, GPU3 24.665 Mh/s, GPU4 24.718 Mh/s
Can you guys help me and tell why getting that low hash rate
Thanks
I had same problem with simplemining Linux running Claymore. I switched back to Win 10 no problems. Im running Win 10. Crimson 16.6 for drivers... That GPU seems locked in core clock and memory clock, dont know why. Im ticking with the settings of my cards, two of them i get it cool working, but when i apply the same settings to the others two i get WATCHDOG: GPU 3 hangs in OpenCL call, exit o WATCHDOG: GPU 1 hangs in OpenCL call, exit Can someone give tips on how to solve this two issues... I had the same issue with my 6x XFX RX480 rig and became more stable when switched back to 16.9.2 crimson driver. All cards are flashed with Boysie's 29MH Low power bios mod. Getting 173MH/s on 6x XFX RX480 8GB with 850W power usage from the wall.
|
|
|
|
pulec777
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 05:56:27 PM |
|
Hi, i just started mining with claymore. 5 RX480 red devils, and on of them keeps hashing low, i copy what im getting
ETH - Total Speed: 102.287 Mh/s, Total Shares: 139, Rejected: 0, Time: 01:35 ETH: GPU0 4.220 Mh/s, GPU1 24.774 Mh/s, GPU2 24.149 Mh/s, GPU3 24.665 Mh/s, GPU4 24.718 Mh/s
Can you guys help me and tell why getting that low hash rate
Thanks
I had same problem with simplemining Linux running Claymore. I switched back to Win 10 no problems. Im running Win 10. Crimson 16.6 for drivers... That GPU seems locked in core clock and memory clock, dont know why. Im ticking with the settings of my cards, two of them i get it cool working, but when i apply the same settings to the others two i get WATCHDOG: GPU 3 hangs in OpenCL call, exit o WATCHDOG: GPU 1 hangs in OpenCL call, exit Can someone give tips on how to solve this two issues... Look at this page. I Works with new drivers and modified BIOS. https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders
|
|
|
|
kiwo647
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 13, 2017, 07:32:39 PM |
|
Only 3 of my gpus work on one of my rigs. For some reason my 380 is not working but my 3 470s are im on 16.10.3 drivers I can post the log if you need it. Any suggestions?
|
|
|
|
yury1988
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 02:38:23 AM |
|
Hi Guys! I got a problem, mining process hangs on Linux. Callstack: root@min-pc:/sys/devices/pci0000:00/0000:00:1c.5/0000:06:00.0# cat /proc/3277/stack [<ffffffffc0145d20>] kcl_fence_default_wait+0x1d0/0x270 [amdkcl] [<ffffffff8eff973d>] fence_wait_timeout+0x7d/0x160 [<ffffffffc030dd7f>] amdgpu_bo_create_restricted+0x3af/0x520 [amdgpu] [<ffffffffc030e19d>] amdgpu_bo_create+0xed/0x190 [amdgpu] [<ffffffffc03252c4>] amdgpu_vm_init+0x194/0x2f0 [amdgpu] [<ffffffffc02fe454>] amdgpu_driver_open_kms+0x64/0xe0 [amdgpu] [<ffffffffc005ddd3>] drm_open+0x1f3/0x410 [drm] [<ffffffffc0064109>] drm_stub_open+0xa9/0x120 [drm] [<ffffffff8ec37d5f>] chrdev_open+0xbf/0x1b0 [<ffffffff8ec30113>] do_dentry_open+0x203/0x310 [<ffffffff8ec3128c>] vfs_open+0x4c/0x70 [<ffffffff8ec4217b>] path_openat+0x2eb/0x1440 [<ffffffff8ec44591>] do_filp_open+0x91/0x100 [<ffffffff8ec3168d>] do_sys_open+0x12d/0x280 [<ffffffff8ec317fe>] SyS_open+0x1e/0x20 [<ffffffff8f29b7f6>] entry_SYSCALL_64_fastpath+0x1e/0xa8 [<ffffffffffffffff>] 0xffffffffffffffff A big problem is the process in not interruptible (system restart required). I use: Linux min-pc 4.8.0-41-generic #44~16.04.1-Ubuntu SMP Fri Mar 3 17:11:16 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux amdgpu-pro-16.60
|
|
|
|
benekiki
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 04:07:35 PM |
|
Hi, i just started mining with claymore. 5 RX480 red devils, and on of them keeps hashing low, i copy what im getting
ETH - Total Speed: 102.287 Mh/s, Total Shares: 139, Rejected: 0, Time: 01:35 ETH: GPU0 4.220 Mh/s, GPU1 24.774 Mh/s, GPU2 24.149 Mh/s, GPU3 24.665 Mh/s, GPU4 24.718 Mh/s
Can you guys help me and tell why getting that low hash rate
Thanks
It occurs on the primary video card. You can either attach a monitor to it or a dummy vga dongle.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 05:54:39 PM |
|
v8.1:
- added Ethereum+Pascal mode for NVidia cards. - improved "-di detect" option: now after GPU order detection miner starts mining with the detected order. - now remote management is working in read-only mode by default. - improved "-mport" option, now you can specify network adapter IP for incoming connections for remote management. - added "-benchmark" option. - fixed issue with "-retrydelay" option. - added "-v" option. - a few minor bug fixes and improvements. - EthMan: added option for font color selection.
|
|
|
|
markus124
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 06:02:45 PM |
|
New update. Thank you clarymore. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
woodaxe
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 129
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 06:39:11 PM |
|
Any speed increase on rx470/480 cards
|
|
|
|
Za1n
Legendary
Offline
Activity: 1078
Merit: 1011
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 07:20:50 PM |
|
Any speed increase on rx470/480 cards
It is getting the exact same speeds here for me on both RX470/480 cards as it was on 8.0, or even 7.4 for that matter.
|
|
|
|
BrotnerMouzon
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 07:43:14 PM |
|
Any speed increase on rx470/480 cards
According to the data from the pool, an increase of 1-2 mh \ s from 8 rx 470
|
|
|
|
coinzoid
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 07:54:06 PM |
|
Any speed increase on rx470/480 cards
According to the data from the pool, an increase of 1-2 mh \ s from 8 rx 470 Which pool are you using?
|
|
|
|
BrotnerMouzon
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 08:03:30 PM |
|
Any speed increase on rx470/480 cards
According to the data from the pool, an increase of 1-2 mh \ s from 8 rx 470 Which pool are you using? ethermine.org
|
|
|
|
OverEasy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 08:10:32 PM |
|
Did the default port change for Ethman? All rigs on 8.0 are being picked up on Ethman but the rig I just upgraded to 8.1 is not.
|
|
|
|
miner417
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 08:54:30 PM Last edit: March 14, 2017, 09:29:56 PM by miner417 |
|
I'm having issues with an RX 480 mining. Firstly I'm only getting a max of 22H/s, which I know is low for it, and secondly I keep getting these spikes that go down to like 17H/s, and it stays there for a bit then goes back up. Currently I'm just running base with base bios, but I tried a different Bios, and overclocking with Wattman, and I couldn't get any more performance out of it or make it more stable, does anyone have any ideas? I tried only mining Eth and not using the Dual mode, but it didn't help at all. It's an MSI RX 480 Armor 4g on GPU0 that I'm talking about. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FFEA6f0o.png&t=665&c=wTRGw94hDuN7HQ)
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 11:06:30 PM |
|
I'm having issues with an RX 480 mining. Firstly I'm only getting a max of 22H/s, which I know is low for it, and secondly I keep getting these spikes that go down to like 17H/s, and it stays there for a bit then goes back up. Currently I'm just running base with base bios, but I tried a different Bios, and overclocking with Wattman, and I couldn't get any more performance out of it or make it more stable, does anyone have any ideas? I tried only mining Eth and not using the Dual mode, but it didn't help at all. It's an MSI RX 480 Armor 4g on GPU0 that I'm talking about. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FFEA6f0o.png&t=665&c=wTRGw94hDuN7HQ) the 4 GB cards have slower memory, 22 is what they will do. 8 GB cards usually have the faster memory and will do 24.5. Bios modding will yield about 24.7 and 28 respectively. Core clock has very little to do with speed on Ethereum, but it will affect dual mining. Overclocking memory sometimes makes the minor slower because the card will use looser timings if it is not bios modded. To help with tips you can set the minor process to a higher priority in Windows task manager, or experiment with -dcri.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
miner417
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 14, 2017, 11:23:19 PM |
|
I'm having issues with an RX 480 mining. Firstly I'm only getting a max of 22H/s, which I know is low for it, and secondly I keep getting these spikes that go down to like 17H/s, and it stays there for a bit then goes back up. Currently I'm just running base with base bios, but I tried a different Bios, and overclocking with Wattman, and I couldn't get any more performance out of it or make it more stable, does anyone have any ideas? I tried only mining Eth and not using the Dual mode, but it didn't help at all. It's an MSI RX 480 Armor 4g on GPU0 that I'm talking about. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FFEA6f0o.png&t=665&c=wTRGw94hDuN7HQ) the 4 GB cards have slower memory, 22 is what they will do. 8 GB cards usually have the faster memory and will do 24.5. Bios modding will yield about 24.7 and 28 respectively. Core clock has very little to do with speed on Ethereum, but it will affect dual mining. Overclocking memory sometimes makes the minor slower because the card will use looser timings if it is not bios modded. To help with tips you can set the minor process to a higher priority in Windows task manager, or experiment with -dcri. Okay, so that solves that issue. I tried a Bios mod and it didn't seem to help at all, stayed at 22. It seems like I get 21 on average. Do you have any idea's about the fluctuating of the speed though?
|
|
|
|
manotroll
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2017, 12:55:20 AM |
|
Hi, i just started mining with claymore. 5 RX480 red devils, and on of them keeps hashing low, i copy what im getting
ETH - Total Speed: 102.287 Mh/s, Total Shares: 139, Rejected: 0, Time: 01:35 ETH: GPU0 4.220 Mh/s, GPU1 24.774 Mh/s, GPU2 24.149 Mh/s, GPU3 24.665 Mh/s, GPU4 24.718 Mh/s
Can you guys help me and tell why getting that low hash rate
Thanks
I had same problem with simplemining Linux running Claymore. I switched back to Win 10 no problems. Im running Win 10. Crimson 16.6 for drivers... That GPU seems locked in core clock and memory clock, dont know why. Im ticking with the settings of my cards, two of them i get it cool working, but when i apply the same settings to the others two i get WATCHDOG: GPU 3 hangs in OpenCL call, exit o WATCHDOG: GPU 1 hangs in OpenCL call, exit Can someone give tips on how to solve this two issues... I had the same issue with my 6x XFX RX480 rig and became more stable when switched back to 16.9.2 crimson driver. All cards are flashed with Boysie's 29MH Low power bios mod. Getting 173MH/s on 6x XFX RX480 8GB with 850W power usage from the wall. Could you make this BIOS available?
|
|
|
|
VxTuga
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2017, 01:06:13 AM |
|
I'm having issues with an RX 480 mining. Firstly I'm only getting a max of 22H/s, which I know is low for it, and secondly I keep getting these spikes that go down to like 17H/s, and it stays there for a bit then goes back up. Currently I'm just running base with base bios, but I tried a different Bios, and overclocking with Wattman, and I couldn't get any more performance out of it or make it more stable, does anyone have any ideas? I tried only mining Eth and not using the Dual mode, but it didn't help at all. It's an MSI RX 480 Armor 4g on GPU0 that I'm talking about. https://i.imgur.com/FEA6f0o.pngthe 4 GB cards have slower memory, 22 is what they will do. 8 GB cards usually have the faster memory and will do 24.5. Bios modding will yield about 24.7 and 28 respectively. Core clock has very little to do with speed on Ethereum, but it will affect dual mining. Overclocking memory sometimes makes the minor slower because the card will use looser timings if it is not bios modded. To help with tips you can set the minor process to a higher priority in Windows task manager, or experiment with -dcri. Okay, so that solves that issue. I tried a Bios mod and it didn't seem to help at all, stayed at 22. It seems like I get 21 on average. Do you have any idea's about the fluctuating of the speed though? I'm pretty sure that with a RX 480 4GB 1750mhz memory you should be doing about ~27 mh/s eth with modded bios and a bit higher mem speed. Modded 8gb cards with 2000mhz+ mem speed are capable of ~30mh/s. Depending on the coin, dual mining can take the speed down a bit as seen from my rx 480 1200/2100mhz dual mining eth/sc: https://gyazo.com/42527769f77e8672d3e85b61df651082 vs eth/pascal: https://gyazo.com/6024bbe014d3542edd0e41601ee73a5b(i'm running lower intensity with eth/pascal so that's why its still pretty fast with eth). So i would say that something is wrong, and you should try troubleshooting it. Try changing drivers to the latest ones or Catalyst (Crimson) 15.12, try changing the settings on the miner and try other clock/mem speeds on your GPU to see if it gets faster...
|
|
|
|
rmizuuti
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2017, 01:23:28 AM |
|
Hi there.
I'm having some issues with the devfee. It seems like it cannot connect to the mining pools defined by Claymore, so the miner stops working after some time. Anyone else having this issue?
|
|
|
|
du44
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 15, 2017, 02:33:42 AM |
|
Hi there.
I'm having some issues with the devfee. It seems like it cannot connect to the mining pools defined by Claymore, so the miner stops working after some time. Anyone else having this issue?
try to add -allpools 1 to you batch file.
|
hello
|
|
|
|