Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Vaslime]

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

[ximg]https://i.imgur.com/6yMwR8P.png[/ximg]

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0



I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

Ok thank you!

I want to buy 2 or 3 cards to mine on my own pc. I see everyones buying AMD 470 4GB cards, but I would like something more powerfull since I'm not buying 5 or 6 cards. Would you recommend anything specific?

Thanks again!

The 470 is almost as powerful as the 480.

[ryderbg]

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

[alrami]

Good time for all

What swap must be set for 1070 cards?
i have 4 card rig 980 + 3x1070
Dual miner can work with any 2 cards from a rig
if more, i see a mistake like "CUDA error, can't allocate big bufer for DAG"

Win7x64 Claymore 9.3
swap 16-32-64 = same

[vapourminer]

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

[ryderbg]

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

Tried but not working. Also tried "Sc", "Sia", "sia", "Siacoin" and "siacoin".

[OverEasy]

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

Tried but not working. Also tried "Sc", "Sia", "sia", "Siacoin" and "siacoin".

I think I read somewhere you have to wait for version 2 of NH miner for SIA

[alfacro]

Why in "dual mining " mode I have 2 MH/s less on ETH on each card in rig?

[vince212]

is this better than ewbf for zec? im using gtx 1060

[mantor84]

hi guys...I really need your help.

I don't know why...but the watchdog error is killing me. I mean I have no idea what I could do to solve this issue.

My current rig looks like that:
7x RX580 Sapphire Nitro+ 8GB
8GB RAM
Windows 10
Virtual Memory min 2000 max 50000 (increased that much just to see if its working better...but it isn't)
Temp: 52-58°C
Fan: 60%
- ethi 4
- gser 2

The hole system is running but after some minutes/hours I get an watchdog error mostly at GPU4.
I checked everything used new riser even from an other manufacturer but it doesn't work.

The new Claymore V9.4 miner doesn't help.

If I have an Watchdog error I need to reboot my hole system an normally restart of Claymore never worked for me even from the beginning.


My watchdog is looking like that:
01:14:59:055   1a28   watchdog - thread 0 (gpu0), hb time 109
01:14:59:056   1a28   watchdog - thread 1 (gpu0), hb time 31
01:14:59:056   1a28   watchdog - thread 2 (gpu1), hb time 94
01:14:59:056   1a28   watchdog - thread 3 (gpu1), hb time 16
01:14:59:056   1a28   watchdog - thread 4 (gpu2), hb time 47
01:14:59:056   1a28   watchdog - thread 5 (gpu2), hb time 125
01:14:59:057   1a28   watchdog - thread 6 (gpu3), hb time 31
01:14:59:057   1a28   watchdog - thread 7 (gpu3), hb time 109
01:14:59:057   1a28   watchdog - thread 8 (gpu4), hb time 8297
01:14:59:058   1a28   watchdog - thread 9 (gpu4), hb time 8375
01:14:59:058   1a28   watchdog - thread 10 (gpu5), hb time 47
01:14:59:058   1a28   watchdog - thread 11 (gpu5), hb time 125
01:14:59:058   1a28   watchdog - thread 12 (gpu6), hb time 141
01:14:59:059   1a28   watchdog - thread 13 (gpu6), hb time 63

GPU 4 watchdog is way too high... and I hope you can give me some tipps to solve this.

Am I the only one who has that issue? couldn't find a solution at www.


If you need more information let me know.


appreciate for any help.



PS: approx. 3-4 days ago I could mine over 100 hours in a row and I didn't change anything till then.

[Maicol792]

I want buy a rx5xx series what is the best series in eth mining for buy? Thanks

[MinerosYV]

hi guys...I really need your help.

I don't know why...but the watchdog error is killing me. I mean I have no idea what I could do to solve this issue.

My current rig looks like that:
7x RX580 Sapphire Nitro+ 8GB
8GB RAM
Windows 10
Virtual Memory min 2000 max 50000 (increased that much just to see if its working better...but it isn't)
Temp: 52-58°C
Fan: 60%
- ethi 4
- gser 2

The hole system is running but after some minutes/hours I get an watchdog error mostly at GPU4.
I checked everything used new riser even from an other manufacturer but it doesn't work.

The new Claymore V9.4 miner doesn't help.

If I have an Watchdog error I need to reboot my hole system an normally restart of Claymore never worked for me even from the beginning.


My watchdog is looking like that:
01:14:59:055   1a28   watchdog - thread 0 (gpu0), hb time 109
01:14:59:056   1a28   watchdog - thread 1 (gpu0), hb time 31
01:14:59:056   1a28   watchdog - thread 2 (gpu1), hb time 94
01:14:59:056   1a28   watchdog - thread 3 (gpu1), hb time 16
01:14:59:056   1a28   watchdog - thread 4 (gpu2), hb time 47
01:14:59:056   1a28   watchdog - thread 5 (gpu2), hb time 125
01:14:59:057   1a28   watchdog - thread 6 (gpu3), hb time 31
01:14:59:057   1a28   watchdog - thread 7 (gpu3), hb time 109
01:14:59:057   1a28   watchdog - thread 8 (gpu4), hb time 8297
01:14:59:058   1a28   watchdog - thread 9 (gpu4), hb time 8375
01:14:59:058   1a28   watchdog - thread 10 (gpu5), hb time 47
01:14:59:058   1a28   watchdog - thread 11 (gpu5), hb time 125
01:14:59:058   1a28   watchdog - thread 12 (gpu6), hb time 141
01:14:59:059   1a28   watchdog - thread 13 (gpu6), hb time 63

GPU 4 watchdog is way too high... and I hope you can give me some tipps to solve this.

Am I the only one who has that issue? couldn't find a solution at www.


If you need more information let me know.


appreciate for any help.



PS: approx. 3-4 days ago I could mine over 100 hours in a row and I didn't change anything till then.

It sounds like W10 updated and is messing with it, we are having problems with the 7 cards rigs, since a couple of weeks as a resul of an update, reset your system to a previus date.
We had some space left on some other rigs so took it down to 5.
Thats why we are building no more that 4 cards rigs now.
Should try ti change the GPU4 raiser just in case.

[bisba]

hey guys

can someone help me to improve my .bat file for better performance?-dcri -eth and all that stuff?

im mining with a single rx 480 8g

my bat is this


EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1Eif3QZGmvZSdUdzMs7Cd39wEGy2moWUTx -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 1Eif3QZGmvZSdUdzMs7Cd39wEGy2moWUTx

anybody?

up

[usSiR]

I just started mining ETH and I have two GPUs, RX480.
One of them has a low hash rate while the other has a normal has rate.

This is what I am seeing:
GPU #0: Ellesmere, 4096 MB available, 36 compute units
GPU #1: Ellesmere, 4096 MB available, 36 compute units
ETH - Total Speed: 26.880 Mh/s, Total Shares: 15, Rejected: 0, Time: 00:34
ETH: GPU0 4.307 Mh/s, GPU1 22.572 Mh/s
Incorrect ETH shares: none
Pool switches: ETH - 0, DCR - 0
Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #125
GPU0 t=50C fan=22%, GPU1 t=72C fan=44%

GPU0 t=49C fan=22%, GPU1 t=73C fan=44%
ETH: 05/25/17-17:45:15 - New job from us2.ethermine.org:4444
ETH - Total Speed: 26.879 Mh/s, Total Shares: 15, Rejected: 0, Time: 00:34
ETH: GPU0 4.308 Mh/s, GPU1 22.571 Mh/s

Why is the one so much slower?
I have my monitor plugged into one of them and I am using risers on both of them.
One is plugged into the PCIEx16 slot while the other is plugged into the PCIEx1. Should they both be in a x16 slot?

Thanks for the help

Cancel that!
I swapped to both PCIEx16 slots and now i'm getting 22.6 Mh/s on both cards. I dont know if that did it or restarting did it. I guess I'll find out more when I buy more GPUs

[AriesIV10]

Does anyone have a solution to the first GPU1 not working?  I have swapped out GPUs, but GPU1 never works.  I have reduced to 5 GPUs, 4GPUs...but still GPU1 does not start.

Check WattTool and see if the core clock dropped. If so, hit the set on the core clock table and it should jump back.

I tried it but, the core clock was not low.  Any Other Solutions/Experiences?

Trying to find the solution to GPU1 not working.  Can anyone help?
Notice GPU1 on the top right (Hardware Monitor)

[gOCe]

Does anyone have a solution to the first GPU1 not working?  I have swapped out GPUs, but GPU1 never works.  I have reduced to 5 GPUs, 4GPUs...but still GPU1 does not start.

Check WattTool and see if the core clock dropped. If so, hit the set on the core clock table and it should jump back.

I tried it but, the core clock was not low.  Any Other Solutions/Experiences?

https://i.imgur.com/yRjw2cN.jpg

Trying to find the solution to GPU1 not working.  Can anyone help?
Notice GPU1 on the top right (Hardware Monitor)

Really you need to lower the core and or mem of that card, just you aren´t checking the right one.
Claymore says gpu2 has lower hashrate, but monitor says gpu1 have lower Power W
Also check Claymore 2 Says 61°  And your screen of MSI Says 57°
The enumeration is different in different programs

[Andrey123]

Guys, but how to set up a miner for the production of the ether classic?
And which pool is better?
AMD cards

fly pool is good.

Friend, but how to properly configure the miner?

[Lollaskates]

Hmm, I've been playing around with version 9.4.

Should my GPU (RX570 4GB) have poor ETH hashrate (19-22) and get better as I undervolt? That seems backwards. Normally you have to jack powerlimit or give +vcore to stabilize clockspeed under utilization. Is this expected behavior?

At stock, 1.00v vcore and 1246mhz core, 2000mhz mem @ 1500 straps: 24MH
At undervolted / underclocked, 0.806 vcore, 1100mhz core, 2000mhz mem @ 1500 straps: 29MH.

I've played around with the powerlimit settings, different undervolts at different pstates. I can't quite see the pattern as to why this miner performs better the more I reduce power.

Does anyone have an idea?

[supertux1]

Hmm, I've been playing around with version 9.4.

Should my GPU (RX570 4GB) have poor ETH hashrate (19-22) and get better as I undervolt? That seems backwards. Normally you have to jack powerlimit or give +vcore to stabilize clockspeed under utilization. Is this expected behavior?

At stock, 1.00v vcore and 1246mhz core, 2000mhz mem @ 1500 straps: 24MH
At undervolted / underclocked, 0.806 vcore, 1100mhz core, 2000mhz mem @ 1500 straps: 29MH.

I've played around with the powerlimit settings, different undervolts at different pstates. I can't quite see the pattern as to why this miner performs better the more I reduce power.

Does anyone have an idea?

I hear the RX5xx series is a lot like the RX480.
You can even put a 580 bios on a 480 if you dare. thread on techpowerup

So... you could try to emulate what the Jukebox v4 RX480 bios does and make your own 570 version.

That is:

1. Increase Max Power Limit by 5W

2. Set 1150mhz core clock.

3. 2150 MhZ memory clock @ 900mV, 1750 straps to 2000.

4. WattTool to drop voltage -100mV ("-16" in the gui.)

If that is unstable, drop memory clock to 2130 MhZ and try again.

What's probably happening when you undervolt is that the card runs cooler and makes less errors resulting in faster reported rate.

1500 straps are probably unstable @2150mhz as they are on the RX480. YMMV. You may have a shitty card.

[mantor84]

hi guys...I really need your help.

I don't know why...but the watchdog error is killing me. I mean I have no idea what I could do to solve this issue.

My current rig looks like that:
7x RX580 Sapphire Nitro+ 8GB
8GB RAM
Windows 10
Virtual Memory min 2000 max 50000 (increased that much just to see if its working better...but it isn't)
Temp: 52-58°C
Fan: 60%
- ethi 4
- gser 2

The hole system is running but after some minutes/hours I get an watchdog error mostly at GPU4.
I checked everything used new riser even from an other manufacturer but it doesn't work.

The new Claymore V9.4 miner doesn't help.

If I have an Watchdog error I need to reboot my hole system an normally restart of Claymore never worked for me even from the beginning.


My watchdog is looking like that:
01:14:59:055   1a28   watchdog - thread 0 (gpu0), hb time 109
01:14:59:056   1a28   watchdog - thread 1 (gpu0), hb time 31
01:14:59:056   1a28   watchdog - thread 2 (gpu1), hb time 94
01:14:59:056   1a28   watchdog - thread 3 (gpu1), hb time 16
01:14:59:056   1a28   watchdog - thread 4 (gpu2), hb time 47
01:14:59:056   1a28   watchdog - thread 5 (gpu2), hb time 125
01:14:59:057   1a28   watchdog - thread 6 (gpu3), hb time 31
01:14:59:057   1a28   watchdog - thread 7 (gpu3), hb time 109
01:14:59:057   1a28   watchdog - thread 8 (gpu4), hb time 8297
01:14:59:058   1a28   watchdog - thread 9 (gpu4), hb time 8375
01:14:59:058   1a28   watchdog - thread 10 (gpu5), hb time 47
01:14:59:058   1a28   watchdog - thread 11 (gpu5), hb time 125
01:14:59:058   1a28   watchdog - thread 12 (gpu6), hb time 141
01:14:59:059   1a28   watchdog - thread 13 (gpu6), hb time 63

GPU 4 watchdog is way too high... and I hope you can give me some tipps to solve this.

Am I the only one who has that issue? couldn't find a solution at www.


If you need more information let me know.


appreciate for any help.



PS: approx. 3-4 days ago I could mine over 100 hours in a row and I didn't change anything till then.

It sounds like W10 updated and is messing with it, we are having problems with the 7 cards rigs, since a couple of weeks as a resul of an update, reset your system to a previus date.
We had some space left on some other rigs so took it down to 5.
Thats why we are building no more that 4 cards rigs now.
Should try ti change the GPU4 raiser just in case.

I had deactivated all W10 updates  and all my GPUs can be detected in windows and with claymore.
So I think it should be OK with it... or not?  

I changed the raiser also once ...no effect.

Really strange and frustrating that watchdog issue it doesn't work for longer than 15min  

I've OC all cards the same like that "if its important"
GPU clock: 1150
Memory clock: 2150
GPU voltage: -75mv
Hynix all 7 gpus

[rawnet]

Hi,

Today when I started dual mining (ETH+DCR) on my Asus RX580 STRIX 8GB (Samsung memory) after few minutes computer hangs up?

I don't undervolt - I've only copied 1750 straps to 2000.

When I mine solo only ETH it works just fine - tested for 24h without any problem.


Any clues?

Oh... I'm on Crimson 17.5.2 Beta drivers.