Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Xuper]

Hello

My Rig 1:
OS and Driver : Non-WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.5.2-May17
GPU : Asus Strix RX 480 (Linked , running at x4 v2 ) , XFX GTR RX 480 (Primary , running at x16 v2)
Mobo : MSI Z97 Gaming 5

My batch :

set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal x -epsw x -powlim -10,-10  -tstop 80,80 -tt 65,65 -fanmin 50,50 -fanmax 65,65 -cclock 1100,1100 -mclock 2000,2000 -cvddc 900,900 -mvddc 950,950 -dbg -1


Why does claymore show ?

GPU0 t=64c fan=52%

But On other rig 2 , It shows :

GPU0 t=64C fan=50%, GPU1 t=63C fan=44%

How to fix it ?

Anyone has this solution ?

ok , Finally My problem is now gone , Just "Disable ULPS" in Regedit or MSI afterburner.

[holzer]

Having some issues dual mining and was hoping someone could help me out here. I have a GTX 970 using drivers 347.88 on Win 10. Overclocked just mining ethereum I am getting almost 19Mh/s. When I try to dual mine ethereum and siacoin my ethereum hash rate drops in half. Dual mining I only get about 9 Mh/s for ethereum and about 95 Mh/s for siacoin. Im using this string in my bat file

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

Any help or suggestions are appreciated.

lower the intensity by hitting "-" while the miner is running until ether hashrate is back at 19mhs then run the extra command

so say the intensity works at 17 use the following in bat

use "-dcri 17"

Ok this kind of worked but not really. I had to go down all the way to "-dcri 1" and I was still .5 Mh/s below normal and my sia coin was only 6 Mh/s .... lol . Another issue I am having is this error in the console

Code:

GPU 0, GpuMiner cu_k1 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1
GPU 0 failed
GPU 0, GpuMiner cu_k1 failed 73, an illegal instruction was encountered
GPU 0, GpuMiner kx failed 1

This happens single mining if my memory is overclocked too high (anything over +325 in precicionX) and seems to happen anytime i try to dual mine overclocked at speeds that workk fine single mining. When this happens and the miner restarts then my hashrate drops by 50% and the only way to fix it is to reboot. I looked in the windows event viewer and i see these errors

Code:

Event ID 13 from source nvlddmkm 

\Device\UVMLiteProcess2
Graphics SM Global Exception on (GPC 3, TPC 3): Physical Multiple Warp Errors

\Device\UVMLiteProcess2
Graphics Exception: ESR 0x51de48=0x60009 0x51de50=0x4 0x51de44=0xd3eff2 0x51de4c=0x7f

\Device\UVMLiteProcess2
Graphics SM Warp Exception on (GPC 3, TPC 3): Illegal Instruction Encoding

Im not sure if the problem is my card, drivers or something else. I use this card overclocked at +140/350 when gaming and its been rock solid, but mining not so much. Had to drop the memory overclock to +300 single mining so it doesn't crash overnight

[Jpopple]

Looking for help will may some eth!!!!

My current Rig
Sapphire r9 380x 20 m/h
Gtx 970 18-20 M/h
gtx 970 18-20 m/h
gtx 1070 25 m/h
1300 watt evga gold rated

84-85 Total

Whats next? I know that I can tweak them to get more m/hs just dont know where to start. Anyone point me in the right direction?  What happens if I raise the settings to max memory or whatever I saw a guide saying something about that.

Second is Dual mining worth it? How much you reckon my rig make a day dual mining. Like the value of the alt coin I can mine.

[mohicans]

does -dcri works with nvidia gpu?

[XManiac]

Is it someone who use Asus Dual 1070 OC? How much MH/S do you have?

[ozzy1926]

I am planing to buy 5xx series card but I wonder which is the popular card people are buying?also I wonder can I mine and and nvidia together  in 1 rig running 2 claymore miner?

[Kryptowerk]

Anyone mining ETH + SIA?
What values do you get for

• RX470
• R9 Nano
• RX570 ?

I am not too happy except for the R9 Nano: 26 MH/s ETH + ~900 MH/s SIA.

[congloi]

Help me

I try to dual mining, (eth and pasc) but get error, claymore don't show all gpu fan speed and temp, only show GPU0,

now I rollback to dual one ETH, it's same problem.

now claymore only show GPU0 fan speed and temp, not show another GPU.

I have 2 rig with same problem, one rig I restart band back to mining eth, all ok.

but another one can't fix this problem.

https://scontent.fdad2-1.fna.fbcdn.net/v/t31.0-8/18953261_10154677828412205_2939806301354755197_o.jpg?oh=81f0f5e9ee774c896792efee90bd4e74&oe=59A09B14
 

[cloudp]

Anyone mining ETH + SIA?
What values do you get for

• RX470
• R9 Nano
• RX570 ?

I am not too happy except for the R9 Nano: 26 MH/s ETH + ~900 MH/s SIA.

man i wish i could get 900 mh SIA

480 8gb - 27mh/s eth ~230mh/s SIA -DCRI 10

[Elder III]

Is it someone who use Asus Dual 1070 OC? How much MH/S do you have?

We have 2 of them and they hit 26.5 MH/s each in the Nicehash benchmark run, at 100% stock settings. We probably won't be mining Eth with them so I haven't checked them at non stock settings so far.

[McNippy]

I made 2 .bat files, one for solo ETH and one for both ETH+SIA. However unless I remove/rename file dpools.txt, launching ETH.bat still makes Claymore work with Siacoins as well. Is there a way to force single mining mode without messing with dpools.txt every time?

[cryptolink46]

Hi all, I have an issue in regards to mining SIA.

I am getting the following error:  "Failed to get valid nonce1 in initiate_stratum"

I have managed to mine ether without any problems, but I am unable to mine siacoin (I'm using an Nvidia GTX 1080).

Here is my batch file:

Code:

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

I have read the readme file and have also tried the different sia hosts/pools such as siamining, but they all still produce the same error.

Any help or suggestions are appreciated!

[Teress]

I made 2 .bat files, one for solo ETH and one for both ETH+SIA. However unless I remove/rename file dpools.txt, launching ETH.bat still makes Claymore work with Siacoins as well. Is there a way to force single mining mode without messing with dpools.txt every time?

-mode 1

[ozzy1926]

Which board and CPU is the best combination for 6x 570 available?

[Claymore]

Hi all, I have an issue in regards to mining SIA.
Here is my batch file:

Code:

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

I have read the readme file and have also tried the different sia hosts/pools such as siamining, but they all still produce the same error.
Any help or suggestions are appreciated!

Miner thinks that you mine DCR, not SIA. PM me the log file.

[BrunoS]

In the new version of dual miner manager 3.1 is still the same problem as in the previous version
The .wav file can not be changed. If you change this the manager can not close.

[rawbot]

I am mining on dwarfpool and the monitoring page is showing that the miner has not been active for 6 hours,  but claymore is working normally and accepting shares from dwarfpool.  Is this something to be concerned about or are they stealing my hashrate right now?   I am also mining decred at the same time on suprnova and the decred pool is showing my miner functioning normally.

What is going on?  Is this a website glitch? or are they stealing my hashrate?

[Swiped]

I am mining on dwarfpool and the monitoring page is showing that the miner has not been active for 6 hours,  but claymore is working normally and accepting shares from dwarfpool.  Is this something to be concerned about or are they stealing my hashrate right now?   I am also mining decred at the same time on suprnova and the decred pool is showing my miner functioning normally.

What is going on?  Is this a website glitch? or are they stealing my hashrate?

Got the same thing going on and I was starting to think my machines have been hijacked.  Never seen this before, but I have got no credit for work according to their monitoring page for 7 hours.  Not sure what is going on.

[Sikken]

Hello, can u advise me, which driver for now better for ETH mining? Does it make sense to update to the last?
MSI GTX 1060 x3

[Teress]

Hello, can u advise me, which driver for now better for ETH mining? Does it make sense to update to the last?
MSI GTX 1060 x3

I am using the latest drivers and I'm satisfied.