Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Teress]

I made 2 .bat files, one for solo ETH and one for both ETH+SIA. However unless I remove/rename file dpools.txt, launching ETH.bat still makes Claymore work with Siacoins as well. Is there a way to force single mining mode without messing with dpools.txt every time?

-mode 1

[ozzy1926]

Which board and CPU is the best combination for 6x 570 available?

[Claymore]

Hi all, I have an issue in regards to mining SIA.
Here is my batch file:

Code:

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal address.worker -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address.worker -dcoin sc

I have read the readme file and have also tried the different sia hosts/pools such as siamining, but they all still produce the same error.
Any help or suggestions are appreciated!

Miner thinks that you mine DCR, not SIA. PM me the log file.

[BrunoS]

In the new version of dual miner manager 3.1 is still the same problem as in the previous version
The .wav file can not be changed. If you change this the manager can not close.

[rawbot]

I am mining on dwarfpool and the monitoring page is showing that the miner has not been active for 6 hours,  but claymore is working normally and accepting shares from dwarfpool.  Is this something to be concerned about or are they stealing my hashrate right now?   I am also mining decred at the same time on suprnova and the decred pool is showing my miner functioning normally.

What is going on?  Is this a website glitch? or are they stealing my hashrate?

[Swiped]

I am mining on dwarfpool and the monitoring page is showing that the miner has not been active for 6 hours,  but claymore is working normally and accepting shares from dwarfpool.  Is this something to be concerned about or are they stealing my hashrate right now?   I am also mining decred at the same time on suprnova and the decred pool is showing my miner functioning normally.

What is going on?  Is this a website glitch? or are they stealing my hashrate?

Got the same thing going on and I was starting to think my machines have been hijacked.  Never seen this before, but I have got no credit for work according to their monitoring page for 7 hours.  Not sure what is going on.

[Sikken]

Hello, can u advise me, which driver for now better for ETH mining? Does it make sense to update to the last?
MSI GTX 1060 x3

[Teress]

Hello, can u advise me, which driver for now better for ETH mining? Does it make sense to update to the last?
MSI GTX 1060 x3

I am using the latest drivers and I'm satisfied.

[vapourminer]

Anyone mining ETH + SIA?
What values do you get for

• RX470
• R9 Nano
• RX570 ?

I am not too happy except for the R9 Nano: 26 MH/s ETH + ~900 MH/s SIA.

my powercolor 470 4 gb samsung ram is 28.3 eth, 466 sia at -dcri 15. running 1210/2100, it has been strapped with 1750 timings

my msi  gamingx 470 4 gb samsung ram is 22.9 eth 363 sia at -dcri 15. running 1240/1650. stock vbios

[mshordja]

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS.

[rawbot]

Hi, can somebody help me out.  I need an advice thread because I want to build a second miner and I have a $4200 budget but I need to make sure I buy the right parts.  Can anybody point me to an advice thread for miner building and choosing parts?

[congloi]

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS. https://us.v-cdn.net/5021640/uploads/editor/l9/ccadk9gdujgw.png

ha ha, same error with me.

try -di and many option but not work.

lost few hour to fix

it's problem of Remote Desktop connection, Don't using it, try team viewer or other software, You will see all GPU fan speed and temp.

[mshordja]

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS.

ha ha, same error with me.

try -di and many option but not work.

lost few hour to fix

it's problem of Remote Desktop connection, Don't using it, try team viewer or other software, You will see all GPU fan speed and temp.

Thanks a lot, you make my day , I din;t think that Remote Desktop will create that problem. THANKS

[TunerDude007]

Which board and CPU is the best combination for 6x 570 available?

Asrock H81 Btc 2.0 with G1840. Check marketplace, some folks there selling cheap.

[TunerDude007]

Hi, can somebody help me out.  I need an advice thread because I want to build a second miner and I have a $4200 budget but I need to make sure I buy the right parts.  Can anybody point me to an advice thread for miner building and choosing parts?

Go to youtube and search for Bits Be Trippin or Cryptomined.

[TunerDude007]

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

That card is very hot

[McNippy]

I made 2 .bat files, one for solo ETH and one for both ETH+SIA. However unless I remove/rename file dpools.txt, launching ETH.bat still makes Claymore work with Siacoins as well. Is there a way to force single mining mode without messing with dpools.txt every time?

-mode 1

Thanks, my bad for not noticing it in the OP!

Hey guys, another newbie here. I've configured claymore with nanopool's auto generating tool. For Etherium I opened a wallet on myetherwallet and it works fine but I am having trouble with Siacoins. This is my program view https://i.imgur.com/EkecRfW.png, siacoin shares get stuck quite often (to the point where Current Calculated Hashrate and worker on nanopool stat page goes to 0/offline). Is it a server issue?

That card is very hot

IKR

[absolute_elsewhere]

Hello i am using Claymore's for overclocking , downcloking , temp control and fan control. But some times after i restart the pc the Claymore's doesn;t controll every GPU, its control only GPU0 and not the other. The overclock work for all card but not the temp control and the fan control. But if i made huge number of restart sometime work for every GPU till the next restart.
Here what i use:
-tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 850 -mvddc 850
. I try allso the different commands that i found in "readme" nothing help me. Like -di to list all the GPU and than to map them -gmap.
Need help, i don't know what more to use. And i don't want to restart 20-30 times before it work :neutral:
I will attach also a SS. https://us.v-cdn.net/5021640/uploads/editor/l9/ccadk9gdujgw.png

I'm having the same issue. Can't figure out a reliable way of setting the fan speeds/ voltages through Claymore. I must be doing something wrong. Wish there was some fool-proof guide to make these settings take effect.

[notbatman]

So what happens when you copy the 1500/1700 straps on a GTX1070, will it go over 30 MH/s?

[bdivrik]

hello i will try this miner. i am newbie hope i can do that.