Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Dmitrij98]

Hello guys who faced such a problem, today put the new driver 18.2.1 on the farm computer, it costs two R9 Fury, in partial overclocking, claymore 11, Windows 10 last update, in the AMD 18.2.1 settings included the calculation, afterburner not disconnected everything continues to work, the hashrate from 59Mh/s to 62Mh/s that was pleasantly surprised. Nearby there is a farm 4 Fury R9 and 2 R9 290, installed, Claymore 11, driver 16.9.1, Windows 10 updated, installed the same, after installing 18.2.1 afterburner disconnected, rolled back to 16.9.1 hasht fell. In general, I moved Windows, installed drivers 16.9.1, claymore 11, afterburner 4.4.2 while everything works, but here the hashrate was 172Mh/s, it became 169Mh/s. Why does everything work on one farm and on another radeon tm adrenalin edition 18.2.1 vs afterburner do not work? Can the problem be in the R9 290 ?

[nitrobg]

Hello, what is the expected hashrate for dualmining with GTX 1070? I have a rig of 6x Gigabyte G1 GTX 1070 and I get an average of 31,3 ETH and 880 XVG. My OC settings are +670 memory, +100 clock and 80% voltage. I use -dcri 80 value.

This hashrate is worthless, the RX cards do 1400-1600 XVG. Go mine something else with 1070 and exchange it to ETH, you're losing 50% of your earnings mining ETH with this powerful GPU.

[borgy001]

Hello, what is the expected hashrate for dualmining with GTX 1070? I have a rig of 6x Gigabyte G1 GTX 1070 and I get an average of 31,3 ETH and 880 XVG. My OC settings are +670 memory, +100 clock and 80% voltage. I use -dcri 80 value.

This hashrate is worthless, the RX cards do 1400-1600 XVG. Go mine something else with 1070 and exchange it to ETH, you're losing 50% of your earnings mining ETH with this powerful GPU.

tnx for the tip

[Rough_R]

Hello, what is the expected hashrate for dualmining with GTX 1070? I have a rig of 6x Gigabyte G1 GTX 1070 and I get an average of 31,3 ETH and 880 XVG. My OC settings are +670 memory, +100 clock and 80% voltage. I use -dcri 80 value.

I have almost the same results with G1 GTX1070 31,2ETH 870 XVG oc settings  memory +600, clock 0, and 75% power,

Does anyone mine something with CPU ?
I run Claymore dual and have i5-7500 working nothing in one rig ... is it worth trying at all ?

[Claymore]

SOLVED!
I found the problem!!!
It was the Remote Desktop Connection
If you start Claymore miner remotely using Remote Desktop Connection and you check the logs you will see that it reports that there are no AMD Adapters.
ADL: Cannot find any AMD adapters
The miner will start, it will mine but it will ignore any overclock/undervolt settings for the cards!
I spent 2 days on that!!
I hope that will help some of you.
Please note that this problem does not occur if you use Teamviewer

Now you can check FAQ in Readme and find related info:

- I see only one card via Remote Desktop Connection.
  It's a problem of RDC, use TeamViewer or some other remote access software.

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

[Jamsan]

Hello, what is the expected hashrate for dualmining with GTX 1070? I have a rig of 6x Gigabyte G1 GTX 1070 and I get an average of 31,3 ETH and 880 XVG. My OC settings are +670 memory, +100 clock and 80% voltage. I use -dcri 80 value.

Turn up the DCRI higher - I run mine at 130 DCRI - 30.5 mh/s on eTH And 1300+ mh/s on XVG.

[Xianantung]

Got also had a working rig with 12 radeon r9 390 stabile running, but power use is high, i need 3 PSU to run it
At this time 3 cards are down (power supply cable burns out), rest still works

I also had a second rig with 10GPUs with the 4pin connector riser cards an an asus p10ws stabile for weeks

What driver and windows version?

[DukeStylez]

I Have a R9 380X and a R9 280X. mining with claymore on nanopool for ETC, is that usefull at all anymore? Could someone help me choose the best pool and settings for my GK's?
I have a R9 255 with 2GB in a second rig, what can i mine with that card? since v.11 it should be possible to mine altcoins with it? how and which one is usefull?
it's just for Fun and maybee a few $ over.....

[OptimusMine]

After spending the night reading all the posts in this thread and from other sources besides bitcointalk it seems to me that currently there are no reliable pools for mining XVG , due to overload of miners getting in the dual mining these days, since Claymore released v11 miner. Some pool are stealing just to much of your earnings while others are unreilable and disconnecting miners. People are calculating estimated profits on whattomine, etc and getting great earings but only on the paper, while in practise, when doing this new dual mining (Ethhash + Blake 2s) on these pools that currently support XVG the earings are half or less of the ones shown on whattomine and other calculators. Besides that we had a huge jump in difficulty in mining XVG due to the same reasons. So lets see, more powe consumption, maybe a drop of eth hashrate when dual mining, much more stress on cards then on solo mining, currently unreliable pools, struggle to configurate optimal settings. Mine conclusion: you should wait a few days or a week or two to see the level of difficulty of XVG,  and to see are there any reliable pools with no issues and steals.
Hope that some of ya agree!

[cas33]

Any confirmation on this or it is just the next FUD?

http://news.8btc.com/bitmain-to-release-ethereum-asic-miner-f3-with-72gb-ddr3-dram-in-q2

[mine_phun]

Greetings miners,
I just started new pool for XVG on blake2s algo(for ETH+XVG dual). I will be more than happy if you help to test it and see if everything is okay. We set up only 0.5% fee and in next days or week expect more coins to mine or even few more algos.

stratum+tcp://xvg.ehu.bg:5766 -dpsw c=XVG

Kind Regards!
Enjoy  

@Aliscomputers , it seems you'r VERGE wallet of the pool is configured with the wrong algo as the displayed difficulty is way to low. If you want some help with this you can e-mail me @ nlpool.nl (At) outlook.com so i can help you. Now the people mining in your pool are not getting rewards  

And sorry for this way, but i cannot message you from this forum and couldn't find any e-mail address.

[FFI2013]

After spending the night reading all the posts in this thread and from other sources besides bitcointalk it seems to me that currently there are no reliable pools for mining XVG , due to overload of miners getting in the dual mining these days, since Claymore released v11 miner. Some pool are stealing just to much of your earnings while others are unreilable and disconnecting miners. People are calculating estimated profits on whattomine, etc and getting great earings but only on the paper, while in practise, when doing this new dual mining (Ethhash + Blake 2s) on these pools that currently support XVG the earings are half or less of the ones shown on whattomine and other calculators. Besides that we had a huge jump in difficulty in mining XVG due to the same reasons. So lets see, more powe consumption, maybe a drop of eth hashrate when dual mining, much more stress on cards then on solo mining, currently unreliable pools, struggle to configurate optimal settings. Mine conclusion: you should wait a few days or a week or two to see the level of difficulty of XVG,  and to see are there any reliable pools with no issues and steals.
Hope that some of ya agree!

I agree at first I was earning around whattomine calculated now I can't make a 1/10 of that plus I can't keep my rigs on one pool it keeps switching to my failovers these yiimp copy paste pools with their junk servers need to go

[wtfonly16]

nothing but garbage blake2s verge pools... anybody know solution ?

[mine_phun]

nothing but garbage blake2s verge pools... anybody know solution ?

You can mine on NLpool if you want

STRATUM SERVERS

-o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XVG] | for VERGE (Blake2S)

-o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XSH] | for SHIELD

-o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=CREA] | for CREATIVECOIN

-o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=MAX] | for MAXCOIN

[BennyT]

Any confirmation on this or it is just the next FUD?

http://news.8btc.com/bitmain-to-release-ethereum-asic-miner-f3-with-72gb-ddr3-dram-in-q2

Lots of posts on this already. If you're new to mining I understand but or else the DDR3 ram headline should tell you it's not going to mine equihash.

Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on.

[Metroid]

Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on.

It must be a coincidence, friend has a farm and his hashrate is the same as it was, no change.

[molitar]

Since I moved to version 11 and blake my system keeps crashing Catalyst drivers and rebooting. It does not like Blake that is for sure or the new miner.

[wtfonly16]

Any confirmation on this or it is just the next FUD?

http://news.8btc.com/bitmain-to-release-ethereum-asic-miner-f3-with-72gb-ddr3-dram-in-q2

Lots of posts on this already. If you're new to mining I understand but or else the DDR3 ram headline should tell you it's not going to mine equihash.

Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on.

you do know gddr5 has same bandwidth and speed as ddr3 right
asics dont use gpu memory...

[Kent2]

nothing but garbage blake2s verge pools... anybody know solution ?

You can mine on NLpool if you want

STRATUM SERVERS

-o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XVG] | for VERGE (Blake2S)

-o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XSH] | for SHIELD

-o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=CREA] | for CREATIVECOIN

-o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=MAX] | for MAXCOIN

i mining this pool nlpool.nl  12 hours and 0 balance. 30 gh/s

[2bitninja]

I'm getting only half of my mining speed with Claymore 11 as compared to version 10. This on both my Windows machine and my Linux (EthOS) machine.
I'm dual mining ELLA and keccak (Smartcoin). Amy suggestions would be great. This is across all my AMD RX cards.