Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[MekMekPL]

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

oooh that sucks... i changed all to just c=XVG. I need to have my miners on diffrent position - cause i need to see if they all mine the same etc.
I used ID= from ahash and on unimining and it worked... i also get all sucess shares from your pool...

do not know much about pool admin but should work imho

anyway switched and we will see.

[adyspd]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I switched there all my rigs few days ago, but mined NOTHING, that pool mined only 6 blocks in their whole history, last day. So I switched my rigs again away from them. Probably if they would have 1000x higher overall hashpower, it should be bettter, but I can't say at this moment they are correct or they are stealing shares like unimining.

what pool are you using?

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

Are you sure the pool it's fine?

With 50 Gh/s in 30 minutes I don't see anything on the website, 0.00000000 XVG .
** B2S - Total Speed: 9182.692 Mh/s, Total Shares: 294, Rejected: 0 this is for one rig **
For those shares it should be some XVG pending..

[mine_phun]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I switched there all my rigs few days ago, but mined NOTHING, that pool mined only 6 blocks in their whole history, last day. So I switched my rigs again away from them. Probably if they would have 1000x higher overall hashpower, it should be bettter, but I can't say at this moment they are correct or they are stealing shares like unimining.

what pool are you using?

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

Are you sure the pool it's fine?

With 50 Gh/s in 30 minutes I don't see anything on the website, 0.00000000 XVG .
** B2S - Total Speed: 9182.692 Mh/s, Total Shares: 294, Rejected: 0 this is for one rig **
For those shares it should be some XVG pending..

Yes, i am 100% sure. Just give it a few hours and you will see.

[thildp]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I can just say that I have 16 RIGs on unimining and it's pure fail, you get arround 40% of what you should get. zpool is like the same, and on antpool you keep getting disconnected.
Nothing to loose to try nlpool, i'm changing all my rigs to nlpool.
I hope more will think this way to get a higher hashrate for the poll.

Make your words mine.

[mine_phun]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I switched there all my rigs few days ago, but mined NOTHING, that pool mined only 6 blocks in their whole history, last day. So I switched my rigs again away from them. Probably if they would have 1000x higher overall hashpower, it should be bettter, but I can't say at this moment they are correct or they are stealing shares like unimining.

what pool are you using?

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

Are you sure the pool it's fine?

With 50 Gh/s in 30 minutes I don't see anything on the website, 0.00000000 XVG .
** B2S - Total Speed: 9182.692 Mh/s, Total Shares: 294, Rejected: 0 this is for one rig **
For those shares it should be some XVG pending..

Should be in your balance already now .... as immature, but like i said .... It's fine ......

[miner582]

Dear all,

Let me first say that i am very sorry that it took so long to get our pool NLpool.nl working correctly. When we put it online last weekend i thought that the software YIIMP was easy and ready to work, without bugs. I couldn't have been more wrong.

However, we worked hard last days and solved all issues we found, so the NLpool.nl is now up and working correctly.
I am very grateful to the people around here on this forum who borrowed us some hash power to be able to find blocks and debug.
As everything now works correct the first blocks were found and payouts are running smoothly.

As stated before the pool is located in Amsterdam. This gives you an advantage if you don't want stale shares because of latency and if you want a fast server.

As compensation for the last days and lost blocks we will keep the transaction fees at 0% for the next weeks.

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XVG

The address for Shield Blake2S is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XSH

If you have any questions or other coins you want added to the pool please e-mail us. The e-mail address is displayed on our website nlpool.nl

I added one miner, I will test it before move my others rigs, unimining gave me only one have of whattomine said so it is not good. I hope your pool increase hash to have an alternative. Thanks

[Ifreet]

Yes, i am 100% sure. Just give it a few hours and you will see.
[/quote]

it's coming alright... at least i see xvg coming in my balance

[mikewetminer88]

Dear all,

Let me first say that i am very sorry that it took so long to get our pool NLpool.nl working correctly. When we put it online last weekend i thought that the software YIIMP was easy and ready to work, without bugs. I couldn't have been more wrong.

However, we worked hard last days and solved all issues we found, so the NLpool.nl is now up and working correctly.
I am very grateful to the people around here on this forum who borrowed us some hash power to be able to find blocks and debug.
As everything now works correct the first blocks were found and payouts are running smoothly.

As stated before the pool is located in Amsterdam. This gives you an advantage if you don't want stale shares because of latency and if you want a fast server.

As compensation for the last days and lost blocks we will keep the transaction fees at 0% for the next weeks.

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XVG

The address for Shield Blake2S is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XSH

If you have any questions or other coins you want added to the pool please e-mail us. The e-mail address is displayed on our website nlpool.nl

You should correct your bat file format to below:

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG

NOT -u or -p

PS: I swapping some rigs to nlpool.. looking good now

[Piradoxlanieve]

What is the command to put a name in the pool? in cgminer w = name is used, but in claymore it does not work, by default in the pool they appear with dual name, sorry my english.
OK Solved:
Wallet.Name

[Piradoxlanieve]

Dear all,

Let me first say that i am very sorry that it took so long to get our pool NLpool.nl working correctly. When we put it online last weekend i thought that the software YIIMP was easy and ready to work, without bugs. I couldn't have been more wrong.

However, we worked hard last days and solved all issues we found, so the NLpool.nl is now up and working correctly.
I am very grateful to the people around here on this forum who borrowed us some hash power to be able to find blocks and debug.
As everything now works correct the first blocks were found and payouts are running smoothly.

As stated before the pool is located in Amsterdam. This gives you an advantage if you don't want stale shares because of latency and if you want a fast server.

As compensation for the last days and lost blocks we will keep the transaction fees at 0% for the next weeks.

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XVG

The address for Shield Blake2S is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XSH

If you have any questions or other coins you want added to the pool please e-mail us. The e-mail address is displayed on our website nlpool.nl

You should correct your bat file format to below:

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG

NOT -u or -p

PS: I swapping some rigs to nlpool.. looking good now

unimining have many orphaned blocks, maybe I change my mining power to this pool, does it work correctly?
sorry my english.

[adyspd]

Dear all,

Let me first say that i am very sorry that it took so long to get our pool NLpool.nl working correctly. When we put it online last weekend i thought that the software YIIMP was easy and ready to work, without bugs. I couldn't have been more wrong.

However, we worked hard last days and solved all issues we found, so the NLpool.nl is now up and working correctly.
I am very grateful to the people around here on this forum who borrowed us some hash power to be able to find blocks and debug.
As everything now works correct the first blocks were found and payouts are running smoothly.

As stated before the pool is located in Amsterdam. This gives you an advantage if you don't want stale shares because of latency and if you want a fast server.

As compensation for the last days and lost blocks we will keep the transaction fees at 0% for the next weeks.

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XVG

The address for Shield Blake2S is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XSH

If you have any questions or other coins you want added to the pool please e-mail us. The e-mail address is displayed on our website nlpool.nl

You should correct your bat file format to below:

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG

NOT -u or -p

PS: I swapping some rigs to nlpool.. looking good now

unimining have many orphaned blocks, maybe I change my mining power to this pool, does it work correctly?
sorry my english.

I can confirm that stratum+tcp://mine.nlpool.nl:5766 works perfect.
I did change 5 rigs ( second coin mining ) to mine.nlpool.nl , on the first hour I didn't see anything, but after 2 and half hours I have 62.53261253 XVG, which is really cool, almoust exactly as the calculator.

[adyspd]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I switched there all my rigs few days ago, but mined NOTHING, that pool mined only 6 blocks in their whole history, last day. So I switched my rigs again away from them. Probably if they would have 1000x higher overall hashpower, it should be bettter, but I can't say at this moment they are correct or they are stealing shares like unimining.

what pool are you using?

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

Are you sure the pool it's fine?

With 50 Gh/s in 30 minutes I don't see anything on the website, 0.00000000 XVG .
** B2S - Total Speed: 9182.692 Mh/s, Total Shares: 294, Rejected: 0 this is for one rig **
For those shares it should be some XVG pending..

Should be in your balance already now .... as immature, but like i said .... It's fine ......

It's perfect, I can see my balance now .
62 XVG in 2 hours and half for arround 50 Ghs.
Not paid yet, but it will be soon I guess.
Thanks & keep it up!

[Ratledge]

To complicate matters, it all depends on the type of RAM your cards have too, which is luck of the draw when you buy them.
You'll get Hynix (best) 30-31Mh/s, Samsung (ok) 28-29Mh/s, or Micron (sucks) 28-29 Mh/s.

Is that the general expectation these days?

I always thought that if I got Samsung VRAM I was going to be able to do more. Hynix (formerly HYumdai electroNIX) is better?

I know that Elpida (now defunct, but owned by the generally accepted last place Micron), although some cards made 5 years ago have it, or does that brand live on, made by Micron?

I know that much of it is subjective, absent concrete measurements & data. My 6gb (Gigabyte) 1060 with Hynix is not keeping up with what the 3gb generic/HP 1060 which had Samsung memory.

I could OC the Samsung to +280 stable, but the Hynix has to be dialed back to +200 even though it will run with +240.  I prefer to be able to leave my rig running for the week/end as opposed to having to constantly monitor from remote.

[biggee]

Mining Ubiq with 2GB cards.


Hey guys,

I've set up a 13 x RX560 2GB card rig and I'm mining Ubiq / DCR with it.

The trouble is every time the dev fee kicks in it crashes the miner as the cards can't load the ETH DAG.

I've tried setting :

-allcoins ubiq (warning about having to use -allcoins 1)
-allcoins 1 (crashes the miner when the devfee tries to mine ETH)

I've had to revert to -nofee 1 just to stop the miner crashing but is there another option I'm missing that will tell the devfee to mine Ubiq instead of ETH?

[wsminer]

Mining Ubiq with 2GB cards.


Hey guys,

I've set up a 13 x RX560 2GB card rig and I'm mining Ubiq / DCR with it.

The trouble is every time the dev fee kicks in it crashes the miner as the cards can't load the ETH DAG.

I've tried setting :

-allcoins ubiq (warning about having to use -allcoins 1)
-allcoins 1 (crashes the miner when the devfee tries to mine ETH)

I've had to revert to -nofee 1 just to stop the miner crashing but is there another option I'm missing that will tell the devfee to mine Ubiq instead of ETH?

Try -lidag 3 as extra option

[Vann]

Mining Ubiq with 2GB cards.


Hey guys,

I've set up a 13 x RX560 2GB card rig and I'm mining Ubiq / DCR with it.

The trouble is every time the dev fee kicks in it crashes the miner as the cards can't load the ETH DAG.

I've tried setting :

-allcoins ubiq (warning about having to use -allcoins 1)
-allcoins 1 (crashes the miner when the devfee tries to mine ETH)

I've had to revert to -nofee 1 just to stop the miner crashing but is there another option I'm missing that will tell the devfee to mine Ubiq instead of ETH?

Use Claymore v11 with -allcoins 1. It's completely free with <=2GB cards, so no Dev fee to worry about. Now that ASIC's are out for DCR, you are much better off mining XVG with ~600% better profitability. You can also convert the XVG to HODL DCR if you want to.

http://whattomine.com/coins/152-dcr-blake-14r?utf8=%E2%9C%93&hr=5300&p=240&fee=3&cost=0.12&hcost=0.0&commit=Calculate

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=6600&p=240&fee=3&cost=0.12&hcost=0.0&commit=Calculate

[Hodlmyhand]

Hi all, long time lurker here, I have just added my puny 9GH to the mine.nlpool.nl, i too was finding unimining not giving the rewards I expected.

[Tomee]

Has anyone without a 'newbie' status tried NLPOOL? I'm curious what those more experienced verge miners think of the pool.

I switched there all my rigs few days ago, but mined NOTHING, that pool mined only 6 blocks in their whole history, last day. So I switched my rigs again away from them. Probably if they would have 1000x higher overall hashpower, it should be bettter, but I can't say at this moment they are correct or they are stealing shares like unimining.

what pool are you using?

Please read:

https://bitcointalk.org/index.php?topic=1433925.msg30398663#msg30398663

Again, i am very sorry that some blocks were lost, however this is solved now. I would appreciate it if we could make it up to you ;-)

Also, i would like to say that looking at the miners dashboard is see people mining XVG with the wrong password settings.

-p c=XVG-blake2s  <<< This is incorrect
-p c=XVG,ID=004_RX580_4   << Incorrect
-p x   << Incorrect.

The correct password for verge is c=XVG  nothing more, nothing less ;-)

Are you sure the pool it's fine?

With 50 Gh/s in 30 minutes I don't see anything on the website, 0.00000000 XVG .
** B2S - Total Speed: 9182.692 Mh/s, Total Shares: 294, Rejected: 0 this is for one rig **
For those shares it should be some XVG pending..

Should be in your balance already now .... as immature, but like i said .... It's fine ......

It's perfect, I can see my balance now .
62 XVG in 2 hours and half for arround 50 Ghs.
Not paid yet, but it will be soon I guess.
Thanks & keep it up!

https://imgur.com/a/DuemN . lost XVG? Why?

[biggee]

Use Claymore v11 with -allcoins 1. It's completely free with <=2GB cards, so no Dev fee to worry about. Now that ASIC's are out for DCR, you are much better off mining XVG with ~600% better profitability. You can also convert the XVG to HODL DCR if you want to.

Ahh I didn't know that, thanks!

One issue though, 3 of my RX560's are 4GB cards (10 x 2GB , 3 x 4GB), is that going to cause issues as the 4GB cards will try to mine ETH right?

[biggee]

Try -lidag 3 as extra option

Thanks bro, trying this now, so far so good, although my hashrate is about 1MH/s per card lower than they should be. -nofee is disabled