[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[logicassets]

Wolf, any thoughts on why HBM2 isn't living up to the hype? Drivers not good enough??

Tytanick ,  RX Vega full support is applied in the las update ?...... could you add Cast XMR miner ?  (that miner reach 2000 H/s in XMR per card)... thank you

I HIGHLY doubt he'll get RX Vega going in the immediate future. I just got that pissy bitch of an architecture working on Linux myself.

[1715114064]

1715114064

[1715114064]

1715114064

[1715114064]

1715114064

[enepote]

Can you snap a pic with that error with your phone? And then one of the clocks in the management console? I enabled the mvddc line thru Tytanick's suggestion. Perhaps that same root/utils/oc_dpm2.sh file on your boot drive is both the problem & solution to your error.

Dude I am not the only one. One of the reasons tytanick push the update 1128 out was because some of the Nvidia users could not overclock! I have listen to the only I think 2 that replied and they said the same as each other said. Here others that are having overclocking problems.

https://bitcointalk.org/index.php?topic=1541084.msg22752842#msg22752842  

https://bitcointalk.org/index.php?topic=1541084.msg22785701#msg22785701

Your not listening to me. I cannot change the power limit or the overclock setting. SMOS is not doing what you tell it to. Every time you save and it restarts you watch it scroll down the screen as it loads and come across Overclocking under this line you will see it say Missing Variables. So SMOS did not save or whatever the settings!

As the OS is called Simple you cannot change any overclock or power limit settings! As I been saying in all my post the cards are averaging 177 watts and you cannot change it in Simplemining! The core is overclocked above 1900 MHz. You cannot change it to the stock clock of 1531 MHz or even to the Boost clock of 1721 MHz.

dude we all here using smos, and u are the only one who cannot set the power limit nor overclock
if u want help, try to listen to others
good luck 

Hello.
Im having similar issues to. But i like to point out that im pretty sure, it is related to video/bios video options/video ports, etc, something about that.

Im using, biostar tb250-btc pro for 12 GPUs, and only in some situations i can get the cards to overclock, and only some times. If someone have an advice, or this can help to solve the issue...

monitor connected to dvi port on the motherboard:

   Primary display: Igfx
     System boots but no video on monitor. I can control things on simplemining.net. Overclocking does not work.
  Primary display: Auto or PEG
     No video but overclocking works

monitor connected to dvi port on GPU on 16x port (with riser)
   Primary display: Igfx
     no video. no boot
  Primary display: Auto or PEG
     i can see a dialog: root@simpleminin.net, something like that. after that, monitor goes blank and i can only see a grin line and some purple dots at the top of the monitor.


Any advice would be appreciated.

Thanks

[RSORIA]

hi, i`d run a rig for 1 month and yesterday add a cupple o gpu rx580, now i`m getting there is no screen to be attached matching miner error. at the same time change for new dugfix version...? What could it be?
thanks in advance!!

[ensoru]

I woke up, but there is no solution. There is no support for the product.
Thanks to the developer for the lost my money and time! And thanks for your silence!

I bought an ethOS, I'll go later to install it.

[Wolverine_Na]

hi, i`d run a rig for 1 month and yesterday add a cupple o gpu rx580, now i`m getting there is no screen to be attached matching miner error. at the same time change for new dugfix version...? What could it be?
thanks in advance!!

Usually I reboot SMOS and the message goes away.
If it is not, try under overclocking.

Dagfix, you need to set up new Core Unvervolting and PowerState, overclocking screen.
Most of my setting is 850/3 (RX570/580), some 800/3 (RX470).

It is not difficult. You need just time to find the right setting for your rigs.

[He11cat]

Hello! I have a problem with my rig; just added second card for mining but it runs hotter (GTX1070). I tried to downclock but it's still hot. What do you suggest?

Please find attached screenshot.. Thanks for your help!

https://pasteboard.co/GOyEoVI.png

[chuck732]

Here you got the first photo shows the Missing Variables from Overclocking. I just started the rig to take the pictures and did not give it a chance to warm up. But you see in the left bottom of the picture the power usage for all 6 cards Once warmed up they all hit around 170 to 180 watts.





The second photo, you can see the the core clocks which are above 1900 MHz. Stock they run 1531 MHz and Boost they run 1721 MHz. And the Memory I don't overclock for zcash.

Can you snap a pic with that error with your phone? And then one of the clocks in the management console? I enabled the mvddc line thru Tytanick's suggestion. Perhaps that same root/utils/oc_dpm2.sh file on your boot drive is both the problem & solution to your error.

Dude I am not the only one. One of the reasons tytanick push the update 1128 out was because some of the Nvidia users could not overclock! I have listen to the only I think 2 that replied and they said the same as each other said. Here others that are having overclocking problems.

https://bitcointalk.org/index.php?topic=1541084.msg22752842#msg22752842  

https://bitcointalk.org/index.php?topic=1541084.msg22785701#msg22785701

Your not listening to me. I cannot change the power limit or the overclock setting. SMOS is not doing what you tell it to. Every time you save and it restarts you watch it scroll down the screen as it loads and come across Overclocking under this line you will see it say Missing Variables. So SMOS did not save or whatever the settings!

As the OS is called Simple you cannot change any overclock or power limit settings! As I been saying in all my post the cards are averaging 177 watts and you cannot change it in Simplemining! The core is overclocked above 1900 MHz. You cannot change it to the stock clock of 1531 MHz or even to the Boost clock of 1721 MHz.

dude we all here using smos, and u are the only one who cannot set the power limit nor overclock
if u want help, try to listen to others
good luck  

[tpd09]

@ tytanick

Can you please add dstm's ZCash Nvidia Miner?
thanks

https://bitcointalk.org/index.php?topic=2021765.msg22892906#new

[adore]

Here you got the first photo shows the Missing Variables from Overclocking. I just started the rig to take the pictures and did not give it a chance to warm up. But you see in the left bottom of the picture the power usage for all 6 cards Once warmed up they all hit around 170 to 180 watts.


https://i.imgur.com/9zYicNO.jpg

tested this only for you now, i have no missing variables
https://i.imgur.com/31ZFntb.jpg

[mezerwi]

Hi there

1 of my rig suddently dissappear from the riglist.

On ethermine it still.mining

How to add it back?

[XxsmasxX]

please return with claymore zcash 12.6. ccminer breaks while mining bitcore. Does anybody know why?


*** ccminer 2.2 for nVidia GPUs by tpruvot@github config.json Built with the nVidia CUDA Toolkit 8.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some algos from alexis78, djm34, sp, tsiv and klausT.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-10-12 14:25:00] NVML GPU monitoring enabled.
[2017-10-12 14:25:00] 1 miner thread started, using 'timetravel' algorithm.
[2017-10-12 14:25:00] Starting on stratum tcp://btx.suprnova.cc:3629
/root/xminer.sh: line 58: 25270 Illegal instruction $MINER_PATH $MINER_OPTIO
NS
Miner ended/crashed. Restarting miner in 10 seconds --------------
============ Starting Miner ===============
*** ccminer 2.2 for nVidia GPUs by tpruvot@github config.json Built with the nVidia CUDA Toolkit 8.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some algos from alexis78, djm34, sp, tsiv and klausT.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-10-12 14:25:10] NVML GPU monitoring enabled.
[2017-10-12 14:25:10] 1 miner thread started, using 'timetravel' algorithm.
[2017-10-12 14:25:10] Starting on stratum tcp://btx.suprnova.cc:3629
/root/xminer.sh: line 58: 25587 Illegal instruction $MINER_PATH $MINER_OPTIO
NS
Miner ended/crashed. Restarting miner in 10 seconds --------------

[toda]

Hello, I have installed simpleminer-NV-v1118-kernel4.11.12 on rig of 5x MSI nVidia 1070  and have constant message:
============ Starting Miner ===============
GO TO GLOBAL OPTIONS or RELOAD RIG if you already configured options and this ris is new added !!!!!

I set wallets and stuff in GO TO GLOBAL OPTIONS. Could you advise how to fix this?

[chuck732]

Well as you can see I do have a problem.

Here you got the first photo shows the Missing Variables from Overclocking. I just started the rig to take the pictures and did not give it a chance to warm up. But you see in the left bottom of the picture the power usage for all 6 cards Once warmed up they all hit around 170 to 180 watts.

tested this only for you now, i have no missing variables

[O_m]

Hi! Anyone try to mine Smartcash on simplemining OS? When i use ccminer for keccak algo

-a keccak -o stratum+tcp://pool.smartcash.cc:3333 -u miner.$rigName -p x

, i have that error:

[2017-10-12 16:10:25] Starting on stratum tcp://pool.smartcash.cc:3333
[2017-10-12 16:10:25] NVML GPU monitoring enabled.
[2017-10-12 16:10:25] 2 miner threads started, using 'keccak' algorithm.
/root/xminer.sh: line 58: 20214 Illegal instruction $MINER_PATH $MINER_OPTIO
NS
Miner ended/crashed. Restarting miner in 10 seconds --------------


What's wrong?

[ensoru]

solution for overclocking nvidia cards

after chuck732's post
I tried to download a new image and install it, wait for the full upgrade to version 1128 and ... AMAZINGGGG! Everything is working! Overclocking settings apply!

[chuck732]

I think I'm happy for you. But I already tried a new image and it updated to 1128 as you can see in the photo I posted. Overclock does not work for me.

solution for overclocking nvidia cards

after chuck732's post
I tried to download a new image and install it, wait for the full upgrade to version 1128 and ... AMAZINGGGG! Everything is working! Overclocking settings apply!

[ensoru]

I did not test this on my rig with 13 gpu.
I took for a test another rig with 3 video cards, it all worked.
Tomorrow I will check on the rig with 13 gpu and write the result.

[The_Immortal]

Hi there!

Guys, I'm wondering is there a way to use SMOS if you have non-direct connection with Inetrnet? All my rigs are connected via proxy-server...

Could you tell me how to configure it then if it's possible?

Thank you!

[DougWislon]

I would like to know if anybody is mining with GPU from Pradeon (http://www.pradeon.com/ they have both AMD and Nvidia) on SMOS ? If yes are these GPU stable with SMOS or is it more stable on Win10 pro ?

Thanks for your feedbacks !

[thepixelgeek]

Did you try ssh into rig, and running "sudo /root/utils/oc_nv.sh <core> <mem> <powerlimit>"

example...sudo /root/utils/oc_nv.sh 50 1200 100

I think I'm happy for you. But I already tried a new image and it updated to 1128 as you can see in the photo I posted. Overclock does not work for me.

solution for overclocking nvidia cards

after chuck732's post
I tried to download a new image and install it, wait for the full upgrade to version 1128 and ... AMAZINGGGG! Everything is working! Overclocking settings apply!