[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[clintar2]

Is anyone else having problems with the ccminer miners?

When I try using either ccminer-skunk-krnlx or ccminer-tpruvot, I get the following message:

/root/xminer/sh: line 49: 11860 llegal instruction      $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

It does try and restart but comes back with the same message and is in an endless loop.

Any suggestions?

This is the command I have in for ccminer-skunk-krnlx:
-a skunk -o stratum+tcp://yiimp.ccminer.org:8434 -u BAushxUbDYNPj7RbhuPMf3cCBKaEWPsgb5 -p donate

Thank you.

What could is it running on?

[clintar2]

GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"
then sudo update-grub, reboot
it isn't worked for my 6 rigs.

Did you do all the other lines before that?

[deg026]

GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"
then sudo update-grub, reboot
it isn't worked for my 6 rigs.

Worked fine for me.

can somebody tell me the default root pass for SMOS
i remember it was in some very old post here, but i cannot find it?
somebody help pls

[aaakeym]

GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"
then sudo update-grub, reboot
it isn't worked for my 6 rigs.

Worked fine for me.

Maybe it's matter of image version of smos? You have latest version of smos? I will try it.

[xtoff]

Hi deg026
Login as :

• miner :      user = miner ,  password = miner
• root :       user = root,  password = miner1324

Be careful with the keys  you must type   1 3 2 4  NOT  1234

You can also only log as miner and use sudo for the actions of root

[dartec]

Is anyone else having problems with the ccminer miners?

When I try using either ccminer-skunk-krnlx or ccminer-tpruvot, I get the following message:

/root/xminer/sh: line 49: 11860 llegal instruction      $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

It does try and restart but comes back with the same message and is in an endless loop.

Any suggestions?

This is the command I have in for ccminer-skunk-krnlx:
-a skunk -o stratum+tcp://yiimp.ccminer.org:8434 -u BAushxUbDYNPj7RbhuPMf3cCBKaEWPsgb5 -p donate

Thank you.

What could is it running on?

Hi,
I am not sure what you are asking?

[pbuva]

btw, how can i edit email without plugging it into another computer ?

putty or WinSCP (better for me) - locate config file and edit to correct email.

[kryptoknightk]

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

[ManeBjorn]

It does support them, make sure to download the Nvidia image.

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

[Talat10gu]

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

You can use all nVidia GPUs including P106

[MetaSk]

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

it supports both AMD and Nvidia

I have a 1050ti rig running like a charm on SMOS

only the clocking part is a bit confusing to me, but that's ok I guess

[kryptoknightk]

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

it supports both AMD and Nvidia

I have a 1050ti rig running like a charm on SMOS

only the clocking part is a bit confusing to me, but that's ok I guess

You can't overclock and stuff on Simplemining?

[MetaSk]

I heard Simplemining doesn't support NVIDIA gpus, is that true?

Wanted to try the OS out, got a couple 1060s and a 1070.

it supports both AMD and Nvidia

I have a 1050ti rig running like a charm on SMOS

only the clocking part is a bit confusing to me, but that's ok I guess

You can't overclock and stuff on Simplemining?

you can

here's a screenshot of OC interface

https://prnt.sc/gegshp

[CeeCee]

first a big thanks to tytanik for this great OS. using it a few days and it is really easy to use! i also managed to flash my cards via command line. here my small how to on mac.

- terminal -> ssh miner@ip
- screen -x miner
- ctrl+c till screen quits (it is really important that your gpus aren't mining!!!)
- sudo su
- dmesg -c (tytaniks reboot mechanism if something isn't right)
- cd /root/utils
- ./atiflash -ia 0 (if everything is okay, atiflash should show you some informations about your gpu)
- ./atiflash -s 0 backup0.rom (you can repeat this for every gpu)

now open another terminal tab and do this:
- scp miner@ip:/root/utils/backup0.rom /Local/Target/Destination (this will save the backup0.rom to your mac)

now you need to edit the backup0.rom file with PBE v1.6 https://github.com/jaschaknack/PolarisBiosEditor

when you are ready editing your *.rom just save it and upload your file with the following command at the last terminal tab
- scp /Local/Target/Destination/*.rom miner@ip:/root/utils

now your modded rom file was uploaded to /root/utils. switch back to the ssh session in terminal and proceed to flash your card/s.
- atiflash -p 0 *.rom

if you have more than one gpu i would suggest to flash at first just one card and reboot the system after the flashing process. check if the modded card shows some good results, if so proceed to flash the rest of your cards.

And remember, I'm not responsible for anything you do!

[slastar]

Hi everyone, i have 2 problems running this OS with nvidia GPUs (1060 6GB).

Problem 1 - no GUI
I download fresh image for NV GPU, and when i start it got only text terminal. How start GUI?  Running version for AMD GPUs GUI start by default.

Problem 2 - overclocking
How to downclock core? While mining ETH theres no need to GPU core run on full speed. Under Windows I set core for -400MHz and hashrate are the same like on default clock.  Negative value are not allowed.
And second thing. Is there a way to turn of P2 State. To OC memory clock for 500MHz , from 4000 to 4500MHz, I need to set offest at 1400, so GPU definitly go in to P2 State and drop the clock.

[Hotmetal]

Hi everyone, i have 2 problems running this OS with nvidia GPUs (1060 6GB).

Problem 1 - no GUI
I download fresh image for NV GPU, and when i start it got only text terminal. How start GUI?  Running version for AMD GPUs GUI start by default.

Problem 2 - overclocking
How to downclock core? While mining ETH theres no need to GPU core run on full speed. Under Windows I set core for -400MHz and hashrate are the same like on default clock.  Negative value are not allowed.
And second thing. Is there a way to turn of P2 State. To OC memory clock for 500MHz , from 4000 to 4500MHz, I need to set offest at 1400, so GPU definitly go in to P2 State and drop the clock.

I heard that under linux you can not reduce the power limit of the 1060's (changing it on the UI does nothing for its actual power usage).

[bibyfok]

Fan control + Core/mem offset is broken on 1080Ti : I have a rig of EVGA 1080ti SC2 and there is no way to control anything, the cards stay stock.

https://imgur.com/a/60tXv

Do you guys have any workaround to OC 1080ti under smOS?

@Tytanick Do you have any ETA for this fix?
Impossible to use 1080ti with OC or fan control

Thanks

[poncoherbowo]

anybody know how to remove rocm? because my gpu become running too hot after update rocm

[isurfbook]

Hi for everybody!

I have p106-100 GPU and flashed latest version of SMOS but all GPU give 2mh/s. I search here for some help and found this message:
i did it and know i have 20mh/s per GPU but overclocking on dashboard not working. On Windows OC i have 25mh/s per GPU.

How can I use all the possibilities SMOS? Anybody know how i can fix my problem?

[aaakeym]

GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"
then sudo update-grub, reboot
it isn't worked for my 6 rigs.

Did you do all the other lines before that?

AH,   It s necessary to install rocm kernel?