[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[elgesetia]

Hello Dev
can u update claymore cryptonite 9.1 to 9.7

[rodrirui]

waiting too... for dag-fix in SMOS 

-10% MH/S actualy!!!

As now there is no universal fix and it wont be implemented automatically becasue of many problems that can cause.
If you want please use this image and try booting it with youtr rig. Its the only solution for now.
When AMD will release new drivers then i could implement probably fix as optional update.
Anyway i wont push this update to everyones rig becasue it would be destructive.
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip

i confirmed 15Mh/S more with 7xRX580 NItro + 8GB
BUT ALSO 330W more !!!!!!!

IMO results are different case by case....

The image  simpleminer-RX-v1118_dagfix_computekernel.img.zip didn't work for me in any off my rigs!

The solution was adding the kernel to my v1119 SMOS by hand. But i only had good results in my 480 and 580 cards. My 470 and 570 rigs consumption where off the charts....

Here are my results for the working rigs:

#### RIG 01 ####

6 x (RX480 SAPPHIRE REF 8G --> 1095 2080) --> 890W (148,3W/unid) 157,5mh (26,3mh/unid) | 5,65W/mh
                                                                                950W (158,3W/unid) 172,3mh (28,7mh/unid) | 5,51W/mh (DAG FIX)
#### RIG 02 ####

6 x (RX480 XFX REF 8G --> 1095 2080) --> 910W (151,7W/unid) 157,5mh (26,3mh/unid) | 5,78W/mh
                                                                       960W (160,0W/unid) 172,3mh (28,7mh/unid) | 5,57W/mh (DAG FIX)
#### RIG 03 ####

6 x (RX480 MSI GAMING X 8G --> 1191 2150) --> 885W (147,5W/unid) 162,5mh (27,1mh/unid) | 5.45W/mh
                                                                                 970W (161,7W/unid) 175,0mh (29,2mh/unid) | 5,54W/mh (DAG FIX)

#### RIG 04 ####

2 x (RX480 SAPPHIRE NITRO+ 8G --> 1150 2130)
1 x (RX480 SAPPHIRE NITRO+ 4G --> 1150 1998)
2 x (RX580 SAPPHIRE NITRO+ SE 8G --> 1150 2150) --> 780W (156W/unid) 137.5mh (27,5mh/unid) | 5,67W/mh
                                                                                             890W (178W/unid) 145,8mh (29,2mh/unid) | 6,10W/mh (DAG FIX)
 

How can I add manually the dag-fix kernel?

Hi

I did the following steps:

1 - Stop mining (with a monitor and keyboard attached to the rig do ctrl+c) and exit to console;

2 - At the rig or remote SSH to the rig as root (ssh root@IP_ADDRESS and miner1324 as pass);

3 - wget -qO - http://repo.radeon.com/rocm/apt/debian/rocm.gpg.key | sudo apt-key add - sudo sh -c 'echo deb [arch=amd64] http://repo.radeon.com/rocm/apt/debian/ xenial main > /etc/apt/sources.list.d/rocm.list'

4 - sudo apt-get update

5 - sudo apt-get install rocm

6 - sudo nano  /etc/default/grub

7 - look for this line: GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0" or something like this and add "amdgpu.vm_fragment_size=9" at the end like this:
      GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"

8 - sudo update-grub

9 - sudo reboot

Thats it!

[sk111]

can someone tell me if my GPU is damaged or am I missing something here?

I get this code from time to time:


amdgpu  0000:01:00.0: GPU fault detected: 147 0x05a88408
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_ADDR
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_STATUS
amdgpu  0000:01:00.0: VM fault (0x08, vmid 3) at page 109227


sometimes GPU 0 fails and the rig reboots.

[M.Y_67]

Hello! 

I need help .
I have one Rig mining XMR with Nvidia GTX 750 ti 
I can not Overclock my GPU  i make many test but it doesn´t work
my gpu allways work on stock clock speed 
I think it´s a bug in SmOS

[rodrirui]

can someone tell me if my GPU is damaged or am I missing something here?

I get this code from time to time:


amdgpu  0000:01:00.0: GPU fault detected: 147 0x05a88408
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_ADDR
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_STATUS
amdgpu  0000:01:00.0: VM fault (0x08, vmid 3) at page 109227


sometimes GPU 0 fails and the rig reboots.

Check overclocks. Try to lower then a bit!

[daupheus]

waiting too... for dag-fix in SMOS  

-10% MH/S actualy!!!

As now there is no universal fix and it wont be implemented automatically becasue of many problems that can cause.
If you want please use this image and try booting it with youtr rig. Its the only solution for now.
When AMD will release new drivers then i could implement probably fix as optional update.
Anyway i wont push this update to everyones rig becasue it would be destructive.
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip

thank you I will have a try on this new version 

[daupheus]

waiting too... for dag-fix in SMOS  

-10% MH/S actualy!!!

As now there is no universal fix and it wont be implemented automatically becasue of many problems that can cause.
If you want please use this image and try booting it with youtr rig. Its the only solution for now.
When AMD will release new drivers then i could implement probably fix as optional update.
Anyway i wont push this update to everyones rig becasue it would be destructive.
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip

thank you I will have a try on this new version 

Working well ! But with an increase of Watts

before the Fix I had 106MHs for 680W on wall (4 x RX 580) 
with this fix I had 119MHS for 812W on wall

[tytanick]

Hi tytanick

some news about xmr-stak-amd fail ?

I prefer to mine for my wallet LOL 

Can you test it now guys ? It should work ok now.

the clyamore xmr 9.1 is newest miner for linux. There is no newer version that than, only for windows.

[elgesetia]

Hi tytanick

some news about xmr-stak-amd fail ?

I prefer to mine for my wallet LOL 

Can you test it now guys ? It should work ok now.

the clyamore xmr 9.1 is newest miner for linux. There is no newer version that than, only for windows.

thanks dev.. will try..
how about issue with increase watt after use new kernel ?

[elgesetia]

got eror xmr-stak-amd

============ Starting Miner ===============
0
1
2
3
4
5
6
7
8
[2017-09-03 18:27:22] : JSON config parse error(offset 1690): Missing a name for object member.
Miner ended/crashed. Restarting miner in 10 seconds --------------

[sk111]

can someone tell me if my GPU is damaged or am I missing something here?

I get this code from time to time:


amdgpu  0000:01:00.0: GPU fault detected: 147 0x05a88408
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_ADDR
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_STATUS
amdgpu  0000:01:00.0: VM fault (0x08, vmid 3) at page 109227


sometimes GPU 0 fails and the rig reboots.

Check overclocks. Try to lower then a bit!

I tried downclocking. and the gpu crashes in stock settings.
flashed back to original bios and still crashes..
any suggestions?

[xtoff]

Hi tytanick

some news about xmr-stak-amd fail ?

I prefer to mine for my wallet LOL 

Can you test it now guys ? It should work ok now.

the clyamore xmr 9.1 is newest miner for linux. There is no newer version that than, only for windows.

thanks dev.. will try..
how about issue with increase watt after use new kernel ?

as elgesetia said. not good.

in config.txt no wallet this time

"pool_address" : "xmr-eu2.nanopool.org:14444",
,
"pool_password" : "x",




 

[starkinc]

Could someone please help me?

I'm trying to boot with SimpleMining OS, but it's not working. It stops with the following messages:

https://i.imgur.com/NX1uUWD.jpg
https://i.imgur.com/EJbRI7R.jpg

Could someone please explain what am I doing wrong? I've flashed the OS to a 16GB USB stick according to manual and inserted it into the rig.

I assume that the problem is not in the rig itself, since it is working finely with windows 10. I'm disconnecting the HDD on which the windows is installed, then putting in the USB drive and then booting. But no luck.

Hey,

look @ your BIOS.

UEFI settings have to be changed to "LEGACY Only", Also AHCI and EHCI have to be enabled, and if you have the setting in your BIOS the IMMOU Emulator.

this fixed tthe issue on my side.

Hi, i have a Gigabyte 970 gaming sli mobo, with one sapphire nitro rx 480 gpu and when i boot with the simple mining os from a flash drive, the screen goes black after some code lines appear and then nothing happens, do you know what can be the problem?

[starkinc]

@tytanick

does the claymore ethmon tool still send the reported hashrate via simplemining to my monitor box ? 

if you have in options  -mport -3333
then you can use this port for monitoring also in ethmon tool.
It is just opened api

awsome thanks, im doing an install to SSD now

So i installed the RX os to an SSD on my MSI Z97 board with six rx 470 cards and changed the text file email as in the instruction

- problem when i see the ubuntu selection screen and click on unbuntu all i see is a black screen

 - ideas ?

I have the same black screen problem, after the ubuntu selection screen, some code lines appear and then black screen, it appears the OS is not fully loading, how did you fix it?

[lards]

Hey guys,

I was wondering if anyone who uses SMOS on more than 10 P106-100 mining edition cards still experiences problems with OC and PL or did tytanick solved this issues? Also, do I still need to edit the system file to get the cards running from 2MH/s to their standard hashrate ( deleting the -allow-empty-configuration command) ?

Wanted to use the SMOS but since OC wasn't available there's not much point really.

Thanks in advance to everyone who can answer my question!

I currently running 3 P106 rig: 2x13gpu and 1x14gpu. I haven't experience any problem with OC so far, there is a new patch that fix the problem already you don't have to edit any system file.

Thanks for your answer I will try for myself soon when I get new hardware.
Btw what manufacturer do you have and what hashrate did you reach? Also, I guess the negative core overclock still doesn't apply in SMOS?

[bobrikov1800]

guys tell me please is it possible to overclock nvidia cards in SMOS?
Maybe someone uses SMOS with GTX1060 3gb?

[ekse]

guys tell me please is it possible to overclock nvidia cards in SMOS?
Maybe someone uses SMOS with GTX1060 3gb?

you have overclocking options, you can limit the powerusage, adjust fans, and overclock the core and memory.

[ysakay]

How can fix this problem ?

https://i.hizliresim.com/1g10JB.jpg

[xtoff]

hi
Try decrease memory frequency in overclock

[bulgar73]

How can fix this problem ?

https://i.hizliresim.com/1g10JB.jpg

what cards is it with this memmory amount ?

----
BTC