Swedish ASIC miner company kncminer.com

[smoothrunnings]

I guess that the best way is if we find a solution with KnC before a trial. For an example, I don't think 3 btc is a fair amount instead of a Titan batch 2. If we find an other solution where they pay some more, I/we might agree with that. In that case, we don't need to go to trial. But if I know KnC enough I don't think they will pay a satoshi more then 3 btc.
If my bound is $8000 and if I'll get $4000 it's still better then nothing. But as you said it's no guarantee that we get the amount we request.

If they put them self into bankrupt, may so be. Then you loose the bound of $1000. If you don't have thoose money or if that amount is too big for you. Perhaps this isn't for you.
And ofc there are other things that could happen. But sometime you need to do some things that isn't what you calculated with. That's life I guess! Even if I only get $100 back, I will tell you for sure that it was worth it! Because I now that I at least did what I could.

Dude. There's no point wasting your time explaining things over and over to the same people in this thread. They just will not listen. Its like the Alpha-T thread all over again. Some people will always have an excuse to bend over and take it, others will fight no matter what. That's just the way the world is.  Notlist3d keeps going on about the same shit over and over despite being told it is illegal in Sweden to take no win no fee cases. Its also been explained that the court decides what reasonable costs of litigation are so KNC will be liable for the extra cost if they hire 50 lawyers at 50k each.

Instead of doing actual research, or listening to people that have, the same people keep coming here posting the same nonsense over and over. Leave them to it. If they are happy to have KNC shit on them and do nothing about it, it's really not up to you or anyone else to convince them otherwise.

I'm going back to lurking, I wasted far too much time on the Alpha thread and this thread seems to be going the same way.

No one would know if KNC would file for bankruptcy during the court case so your claim to "it's illegal in Sweden to take no win cases" is FALSE!

[1714885902]

1714885902

[1714885902]

1714885902

[1714885902]

1714885902

[Fatman3001]

I guess that the best way is if we find a solution with KnC before a trial. For an example, I don't think 3 btc is a fair amount instead of a Titan batch 2. If we find an other solution where they pay some more, I/we might agree with that. In that case, we don't need to go to trial. But if I know KnC enough I don't think they will pay a satoshi more then 3 btc.
If my bound is $8000 and if I'll get $4000 it's still better then nothing. But as you said it's no guarantee that we get the amount we request.

If they put them self into bankrupt, may so be. Then you loose the bound of $1000. If you don't have thoose money or if that amount is too big for you. Perhaps this isn't for you.
And ofc there are other things that could happen. But sometime you need to do some things that isn't what you calculated with. That's life I guess! Even if I only get $100 back, I will tell you for sure that it was worth it! Because I now that I at least did what I could.

Dude. There's no point wasting your time explaining things over and over to the same people in this thread. They just will not listen. Its like the Alpha-T thread all over again. Some people will always have an excuse to bend over and take it, others will fight no matter what. That's just the way the world is.  Notlist3d keeps going on about the same shit over and over despite being told it is illegal in Sweden to take no win no fee cases. Its also been explained that the court decides what reasonable costs of litigation are so KNC will be liable for the extra cost if they hire 50 lawyers at 50k each.

Instead of doing actual research, or listening to people that have, the same people keep coming here posting the same nonsense over and over. Leave them to it. If they are happy to have KNC shit on them and do nothing about it, it's really not up to you or anyone else to convince them otherwise.

I'm going back to lurking, I wasted far too much time on the Alpha thread and this thread seems to be going the same way.

No one would know if KNC would file for bankruptcy during the court case so your claim to "it's illegal in Sweden to take no win cases" is FALSE!

First of all, that's not what he's saying. Second of all, it is illegal in sweden to take no win cases. A lawyer who deliberately tries to push a case with no legitimate legal grounds through the legal system risks being fined.

[notthematrix]

Hi, there,
I'm another idiot who bought a 2nd hand Titan !

Was running fine for 2 days, needed restarting a few times to get dies to work (they "die" after around 8 hours or so, but always seem to come back after a power down).

Anyhoo, I did a power down this morning and it came back up but one die was still running only 2A so I dropped the voltage and restarted again.

Now nothing comes back up at all. No web interface, no ssh.

I have disconnected everything and reconnected. Nothing. I have no LEDs showing on the daughter board where there previously was 3. The controller appears to boot (red LED on and the green flashes a few time, as does the ethernet LED). But still no net access to the controller.

I am currently downloading the 2.0 image to try flashing a new sdcard, but I thought I'd ask if there is anything else I should be checking.

Also, I have the Titan running on 2 EVGA 750 G2 PSUs. Are these sufficient ? My killawatt shows the power draw is around 1500W at the wall.

I was going to use two corsair 750W PSUs to power a cube each, but the Y cables  I have on the G2s don't fit the Corsair sockets. There is a plastic bridge between 2 pins that prevents them going in. Would it be safe to cut that bridge, as I assume the pin outs should be identical for PCIe ?

TIA

you need a 80 gold certified pusu for this if you did not have that you will blow your PSU and your miner!

[Cablez]

I have a corsair AX760 and a CS 750 which I was going to give a cube each - but the damn Y cables won't fit. That's what I'm trying to find out, if I can make them fit will they blow something up !

That connector is for PCIe graphics cards and is pin identical to the '6+2' separate connectors.  The Y cable for Neptunes/Titans are only looking for a 6pin PCIe cable and not the full 8pin version.  Check the rest of the Corsair PSUs for the 6+2 cables and you can use the 6pin section on the Y adapters.  Just make sure you are not chaining the connectors to the Y adapter.  One single power cable to each leg of the Y adapter, otherwise you will melt something.

[nbruce]

I have a corsair AX760 and a CS 750 which I was going to give a cube each - but the damn Y cables won't fit. That's what I'm trying to find out, if I can make them fit will they blow something up !
http://headru.sh/files/Connector_mbpow_pcie_8pin2.png

That connector is for PCIe graphics cards and is pin identical to the '6+2' separate connectors.  The Y cable for Neptunes/Titans are only looking for a 6pin PCIe cable and not the full 8pin version.  Check the rest of the Corsair PSUs for the 6+2 cables and you can use the 6pin section on the Y adapters.  Just make sure you are not chaining the connectors to the Y adapter.  One single power cable to each leg of the Y adapter, otherwise you will melt something.

Thanks,

I don't have the KnC Y connectors, I have shakmods cables that are made for the EVGA G2s. The PSU end of the cables doesn't fit a corsair PSU however, that's what I was asking about.

It appears that the pin out may be different on the Corsairs compared to the EVGAs so I will have to get new cables for the Corsairs.

BTW, all the PSUs I'm using are gold except the AX760 which is platinum.

http://shakmods.com/shop&#!/16-Awg-Gauge-Y-Splitter-PSU-Cables-Titan-Neptune-mining-cables-Pci-e-GPU/p/38332678/category=3316088

[Cablez]

Ah, I see.  Those are direct connects and they will have different pinouts usually depending on PSU brand.  You will have to get cables specific for the Corsairs if you have ones for EVGAs.

[Searing]

I have a corsair AX760 and a CS 750 which I was going to give a cube each - but the damn Y cables won't fit. That's what I'm trying to find out, if I can make them fit will they blow something up !

That connector is for PCIe graphics cards and is pin identical to the '6+2' separate connectors.  The Y cable for Neptunes/Titans are only looking for a 6pin PCIe cable and not the full 8pin version.  Check the rest of the Corsair PSUs for the 6+2 cables and you can use the 6pin section on the Y adapters.  Just make sure you are not chaining the connectors to the Y adapter.  One single power cable to each leg of the Y adapter, otherwise you will melt something.

Thanks,

I don't have the KnC Y connectors, I have shakmods cables that are made for the EVGA G2s. The PSU end of the cables doesn't fit a corsair PSU however, that's what I was asking about.

It appears that the pin out may be different on the Corsairs compared to the EVGAs so I will have to get new cables for the Corsairs.

BTW, all the PSUs I'm using are gold except the AX760 which is platinum.

http://shakmods.com/shop&#!/16-Awg-Gauge-Y-Splitter-PSU-Cables-Titan-Neptune-mining-cables-Pci-e-GPU/p/38332678/category=3316088

Ah, I see.  Those are direct connects and they will have different pinouts usually depending on PSU brand.  You will have to get cables specific for the Corsairs if you have ones for EVGAs.

corsair ax760 set on ebay....I think that is what you said you had

http://www.ebay.com/itm/Corsair-AX760-AX860-ATX-EPS-Modular-80-PLUS-Platinum-Power-Supply-Power-Cables-/181748043821?pt=LH_DefaultDomain_0&hash=item2a5107102d


not sure if these work on the CS750 but I assume this is also a Corsair PSU....if so....then just get some Y cables from Cablez and you are set imho

kinda a pain...but it is what it is.. with your PSU situation.....good to see it resolved...but you really really do need the Y connectors or will probably suffer some burn out
imho ......they do make a big difference

[GA]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

[notthematrix]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

I think they are trollers... did not see anything sabstantial.

[proudpak]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

I hope you have enough knowledge to use a search engine and find an answer.

[GA]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

I hope you have enough knowledge to use a search engine and find an answer.

All your hopes answered;

http://lmgtfy.com/?q=Sam+Cole+%2240%25%22

[notthematrix]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

I hope you have enough knowledge to use a search engine and find an answer.

All your hopes answered;

http://lmgtfy.com/?q=Sam+Cole+%2240%25%22

quite happy with KNC stuff , got 2 miners running at 3.5 ~ 3.9th yes it is not standard stuff so thats were most people failed here , and got frustrated.
Mining requires a lot of fine  tuning undervolting  to save power , getting better cooling replacing the beagle board with a more recent one , getting 2x1300 watt 80 gold PSU'S getting special connectors to not overheat the cables , its complex but when running and tuned you don't need to worry it does work.
But I am  afraid itś  to complex for most people here.

[notthematrix]

Did anyone take back 3 btc

I didn't for sure! But I know that I saw someone in this thread that wrote that he did it.

No the only way to get some more back is trough the group action against KnC. 2 lawyers from Sweden and 1 from USA.
http://kncclassaction.com/

You realize if KNC goes bankrupt in the process you will lose your retainer ($1,500.00 ish USD) with these lawyers. You'd be better playing poker at a casino!

Have you been following the funding KNC is closing and following the company? They aren't going bankrupt very soon..

Well I've been hearing the opposite that they are merged now with another company and hope to control 40% of all bitcoin mining with their 1ckwh or whatever 16nm chip data halls...which is really gonna suck say in 2017 looking at knc with 40% of all bitcoin mining at that point..i will physically be ill on reading such someday (say it ain't so!)

Any reference for this mantra of 40% you are repeating over and over again, or just trolling? We need facts to make the right decisions when investing, not fantasy ramblings.

I hope you have enough knowledge to use a search engine and find an answer.

All your hopes answered;

http://lmgtfy.com/?q=Sam+Cole+%2240%25%22

quite happy with KNC stuff , got 2 miners running at 3.5 ~ 3.9th yes it is not standard stuff so thats were most people failed here , and got frustrated.
Mining requires a lot of fine  tuning undervolting  to save power , getting better cooling replacing the beagle board with a more recent one , getting 2x1300 watt 80 gold PSU'S getting special connectors to not overheat the cables , its complex but when running and tuned you don't need to worry it does work.
But I am  afraid itś  to complex for most people here.

[cryptodevil]

quite happy with KNC stuff , got 2 miners running at 3.5 ~ 3.9th yes it is not standard stuff so thats were most people failed here , and got frustrated.
Mining requires a lot of fine  tuning undervolting  to save power , getting better cooling replacing the beagle board with a more recent one , getting 2x1300 watt 80 gold PSU'S getting special connectors to not overheat the cables , its complex but when running and tuned you don't need to worry it does work.
But I am  afraid itś  to complex for most people here.

Fuck's sake, you are such a dick!

Nobody here is complaining about KnC because of the hardware needing 'fine tuning', as most people who bought from them are, contrary to your ignorant arrogance, more than capable of understanding how to set up ASIC miners.

They are complaining about KnC having lied through their fucking teeth about when they would have units ready and to what performance level.

Simply repeating how you consider everybody other than you to be too stupid and, therefore, prone to being 'frustrated' at KnC, is merely showing that you are either incredibly dim about the facts of the matter or you are actually ignoring the facts so you can keep apologia-shilling for KnC.

Either way, fuck off with your condescending attitude. The only person you are impressing with it is yourself.

[padrino]

quite happy with KNC stuff , got 2 miners running at 3.5 ~ 3.9th yes it is not standard stuff so thats were most people failed here , and got frustrated.
Mining requires a lot of fine  tuning undervolting  to save power , getting better cooling replacing the beagle board with a more recent one , getting 2x1300 watt 80 gold PSU'S getting special connectors to not overheat the cables , its complex but when running and tuned you don't need to worry it does work.
But I am  afraid itś  to complex for most people here.

Fuck's sake, you are such a dick!

Nobody here is complaining about KnC because of the hardware needing 'fine tuning', as most people who bought from them are, contrary to your ignorant arrogance, more than capable of understanding how to set up ASIC miners.

They are complaining about KnC having lied through their fucking teeth about when they would have units ready and to what performance level.

Simply repeating how you consider everybody other than you to be too stupid and, therefore, prone to being 'frustrated' at KnC, is merely showing that you are either incredibly dim about the facts of the matter or you are actually ignoring the facts so you can keep apologia-shilling for KnC.

Either way, fuck off with your condescending attitude. The only person you are impressing with it is yourself.

Completely agree with this, notthematrix obviously has issues with comprehension given the lack of understanding with respect to the real issues..

American schooling I would guess

[noddy2000]

quite happy with KNC stuff , got 2 miners running at 3.5 ~ 3.9th yes it is not standard stuff so thats were most people failed here , and got frustrated.
Mining requires a lot of fine  tuning undervolting  to save power , getting better cooling replacing the beagle board with a more recent one , getting 2x1300 watt 80 gold PSU'S getting special connectors to not overheat the cables , its complex but when running and tuned you don't need to worry it does work.
But I am  afraid itś  to complex for most people here.

Fuck's sake, you are such a dick!

Nobody here is complaining about KnC because of the hardware needing 'fine tuning', as most people who bought from them are, contrary to your ignorant arrogance, more than capable of understanding how to set up ASIC miners.

They are complaining about KnC having lied through their fucking teeth about when they would have units ready and to what performance level.

Simply repeating how you consider everybody other than you to be too stupid and, therefore, prone to being 'frustrated' at KnC, is merely showing that you are either incredibly dim about the facts of the matter or you are actually ignoring the facts so you can keep apologia-shilling for KnC.

Either way, fuck off with your condescending attitude. The only person you are impressing with it is yourself.

Completely agree with this, notthematrix obviously has issues with comprehension given the lack of understanding with respect to the real issues..

American schooling I would guess

Unforetunitly that 'gates & Rockefeller schooling' your on about put together in 1903 is also been used in Europe and most so called 'developed' countries (replace developed with manipulated) and schooling is about programming children into not thinking and being creative and telling them do things one way and not another. Not to answer back and to accept what 'Mr' or 'Mrs' says! To wear a uniform and lose your individualism! Some even go onto further manipulation and join the army etc for some hard core programming and truly get their heads fucked over! All the scams like bfl are run by x military people exclusively lol. If you know anyone in the military you KNOW it changed them as a person. Its called social engineering, and its been going on for at least 2000-3000 years in its current form, if not longer!

I never let schooling get in the way of my education! - mark twain

The sad thing is the human race as been around for at least 500,000- 2 million years and we have been in a state of amnesia for 12000-13000 years due to an event that happened then that were not being told about. The ice age matches up with then but I believe there is more to it than just that. A few people since then, living in a tribal manner (we were not so tribal before and communicated worldwide which is obviously apparent by megaliths all over the world. Every country has pyramids, same philosopies (flower of life etc etc) so its obvious to anyone with 2 braincells we are being lied to about our history! Thats fucking obvious! But since then a few tribes rises to the top and power corrupts, absolute power corrupts absolutely!

Now we have the manipulators of China, the manipulators of Russia, the manipulators of the west (USA, Europe) working together for their own crooked needs. Its like multiple gangs working together! It may work for so long,but they fuck each other over in the end! Then only problem with that is this is the global 'alliance' and the people are under a global attack, but most people have their heads in the sand, reading and watching the properganda stations/papers and even worse, most people are blissfully unaware how much they oppress then oppressed for the oppressors :-( we do it all to ourselves!)

So easy manipulate the world!

[edgar]

Retro is right, this thread has been filled with loudmouthed fuckwits since 2012.

the ones who repeat themselves and wear us down with gibberish are the worst offenders.

but it really is best to leave them to it - you'll only give yourself an aneurism trying to use logic among the 'special'

(also, 'they' are the ones who make the most noise when the self-respecting among us try to do the right thing)

adios, snitches!!

[iknowuandme]

has someone the link for the KNC Lawsuit?

[Xialla]

has someone the link for the KNC Lawsuit?

here here: http://kncclassaction.com - you are affected somehow or just curious?

[kingscrown]

knc ended as fuckin scammers.
such a shame