Swedish ASIC miner company kncminer.com

[jelin1984]

Any good pool

For liteicoij mining??
Exempt litecoin.org pool?L?

[1715012315]

1715012315

[1715012315]

1715012315

[1715012315]

1715012315

[LongAndShort]

Any good pool

For liteicoij mining??
Exempt litecoin.org pool?L?

If you dont mind giving these guys a small % and all your merge mined coins https://solo.nicehash.com

[Searing]

Any good pool

For liteicoij mining??
Exempt litecoin.org pool?L?

The best Litecoin pool I've found is

www.litecoinpool.org  NO FEES

Titan(s) run like a clock ..full out NO ERRORS consistent 650mh (I have 2 dead dies 1 each on 2 cubes)

Winter/Summer no diff

tried www.westhash.com and others high error rates high stale shares etc...so went with the pool with 0% error rate

anyway I WAS gonna mine LTC to BTC direct never got a multipool to work well enough with the Titan(s) to make the junk. Thus have HELD
all my LTC instead ...so I'm way ahead of what I would have been had I just mined to BTC as a result with LTC surge...

anyway my hassle free issues are like NONE on www.llitecoinpool.org


oh and as far as I can tell the POOL has gone down myabe 1x for 1/2 hour in the last 5 months....that also works for me

[jelin1984]

litecoin soon i think will pass 10 dollars


also ask knc for new titan firmware
and tel me that they will be out some time

[GenTarkin]

Regarding Titan, would anyone be interested in a software fix which power cycles the cube w/ offending dies and restarts miner software?
Im still testing it out, but I noticed that part of KNC's code doesnt seem to work when rebooting pi, that is it, doesnt tell the dc/dc's to reset for the cubes like its designed to.
Ive implimented the dc/dc power off & power on into their watchdog script that runs while cgminer does and so far, I have it power off / on the cube that it thinks needs its die reset, instead of just issuing a soft reset to the fpga controller it issues a bfgminer stop, offending cube power off / power on, bfgminer start.
In testing, doing this manually works 100% to bring back dies that just drop off for whatever reason but are sill in fact good, they just need a power cycle.
The trick now is just placing it in the right part of the watchdog script(this is the part that is still in testing). But it worked correctly so far 1 out of 1 time since implimentation. =)
If anyone is interested, let me know, Ill post instructions if enough people want it =)

[jelin1984]

can make any overcloked option for titans??

to 350 mhz?

[GenTarkin]

can make any overcloked option for titans??

to 350 mhz?

nope, I believe frequency is hardcoded or something, either way if you could do 350mhz u wouldnt want to due to the shitty power design of these things. 1 PCIe 6 pin connector is barely designed to handle even the 300mhz factory load settings. They should have AT LEAST used PCIe 8 pin connector.

[jelin1984]

No is not hardware locked
Is like Jupiter
And Jupiter we had overclocked option for a member there


And was perfect

[jelin1984]

Also post here photos
How we can wake up dies at Titan?

[LongAndShort]

Also post here photos
How we can wake up dies at Titan?

I've had to roi some, however some respond to dropping the freq down. (some also like to play with the power settings, however though, i highly recommend a method of deduction; where you don't change more then one setting at a time, if you can help it. My advice is to think of the settings as a volume control and just turn them down slowly to the bottom then come back up slowly. (overclocking underclocking computer cpu styles. Without the power freq formulas because we just don't have one yet, haha)

Try as hard as you can to keep them all dust/insect free and cool as a preventative to killing dies. I've noticed they can just pop around 90+

I turn off the ones i have not been able to recover and have some on 250 that wake back up on restart FYI i've noticed they all respond differently all over the world, unfortunately so unfortunately, as far as i know; there is no tried and true method however.

I highly recommend giving it time to apply first and then shutting down and turning the power off for a very short time and then turning on. Time consuming, however, extremely rewarding in some cases, especially given the cost of the machines.


Fyi this info is all through this thread too, so maybe you, and anyone else wondering about these things might like to pm or jump in a chat room; related to these miners to get a more in depth and faster response from the greater knc miner community

P.s i am not currently available for pm support so no private messages please anyone IRC (internet relay chat) will change your life though

[GenTarkin]

Also post here photos
How we can wake up dies at Titan?

Ive been working on updated watchdog script & webgui stats for titan.
Ive started a new git repo here:

https://github.com/GenTarkin/Titan

I didnt know how to fork knc's original source cuz it has submodules n crap and git is confusing as hell rofl!
So, I made changes locally then created the new repo u see above.
All files are the same except  a couple of the webgui files and the watchdog script. So, it would be safe to rename the original folders and put my new ones in their place.

Anyways, my modifications to watchdog script stops bfgminer, power cycle the cube that has die/dies offline, starts bfgminer.
Its worked 1 out of 1 times so far =P wishing another die would drop so could confirm functionality of script.

Heres what stats look like now:

[GenTarkin]

I can confirm now that the monitor script works, so the code I posted above works. I just had a die drop(had to wait 12hrs for it to happen) and the monitor (watchdog script I modified) detected within 30 seconds or so, then  stopped bfgminer, power cycled the cube w/ dropped die, started bfgminer. Die is back up and running =)
Why KNC didnt code it this way to begin with is beyond me.

[jelin1984]

Ok when you will have out at your custom firmware for testing us

[LongAndShort]

Ok when you will have out at your custom firmware for testing us

You mean this?

https://github.com/GenTarkin/Titan

Can you please post a screenshot of your Status page and your advanced page please?

For documenting and research purposes!

[jelin1984]

How we can install the firmware?

[GenTarkin]

Ok when you will have out at your custom firmware for testing us

You mean this?

https://github.com/GenTarkin/Titan

Can you please post a screenshot of your Status page and your advanced page please?

For documenting and research purposes!

um....
https://bitcointalk.org/index.php?topic=170332.msg11996842#msg11996842

[LongAndShort]

Ok when you will have out at your custom firmware for testing us

You mean this?

https://github.com/GenTarkin/Titan

Can you please post a screenshot of your Status page and your advanced page please?

For documenting and research purposes!

um....
https://bitcointalk.org/index.php?topic=170332.msg11996842#msg11996842

I was meant to be asking jelin1984 for a screenshot of his miner status and advanced page. Sorry for the confusion.


@jelin1984 can you please post a screenshot of your miner status and advanced page please?

[jelin1984]

I did not yet install the firmware

[LongAndShort]

I did not yet install the firmware

Oh, i would love to see one from the official knc firmware please.

[jelin1984]

Can you install the new bfg miner at the Titan custom firmware or not!!.,


Also I need image file for test it
Where is image file?