Antnoob
Newbie
Offline
Activity: 32
Merit: 0
|
|
November 09, 2017, 05:23:58 PM |
|
Hi guys,
Any suggestions for most profitable Scrypt multipool at the moment, anything giving better profits than Nicehash?
Prohashing when it works..is like your hot mess supermodel girlfriend...when it works its great..when it does not you are beyond despondent I keep hanging in there...because mining x11 and scrypt all to LTC...I figure by the time I figure fees to mine BTC and convert and etc I'd pretty much be in the same boat ..multipool wise IT however was crap yesterday..sometimes they refund some hash back....we will see LMAO!!! Well said!! HAHAHAHA! My miners are showing it Dead now. Mining away on the backup pool Yup, I call it " Procrashing ". Went from my primary to my tertiary pool. They don't have enough capacity and doesn't seem like the brothers are in a hurry to expand. When it goes over their capacity they kick some miners off. Seemingly randomly. Hm ... strange ... I was trying to use http://poolpicker.eu/table?algo=scryptand it gives there better results for Zpool for the last 3 days Date Multipool NiceHash ZPOOL ItalYiiMP 2017-11-08 0.00000399 0.00000535 0.00000682 0.00000528 2017-11-07 0.00000396 0.00000512 0.00000740 0.00000528 2017-11-06 0.00000373 0.00000520 0.00000555 0.00000509 2017-11-05 0.00000340 0.00000540 0.00000329 0.00000539 2017-11-04 0.00000326 0.00000520 0.00000412 0.00000542 2017-11-03 0.00000205 0.00000560 0.00000673 0.00000557 2017-11-02 0.00000414 - 0.00000366 0.00000423 (I've tried Zpool for 1 week earlier, but stopped because I heard some bad reviews for them stealing, didn't occur to me but I decided not to risk it) As for Prohashing, never tried it as First pool (due to their enormous BTC withdraw threshold), but according to their own graph their profitability is less (or do they have problems with their own stats also ? ) : 8th - 0.00000480 BTC 7th - 517 6th - 488 5th - 538 4th - 487 3rd - 518 2nd - 529 According to this they were the best pool only on 2nd Nov, when we don't have the stats from Nicehash ... So ... I don't know should I believe such stats or not... All I know is that every time I switch to another pool cause it's more profitable according to the poolpicker, the one I left takes the lead ... I'm feeling like a black sheep already !
|
|
|
|
adamantasaurus
|
|
November 09, 2017, 11:49:25 PM |
|
Hey Guys quick question, sorry if it has been answered already but I scanned the thread a little bit and can't really find it... What is the most profitable way to mine litecoin is it prohash? Or another litecoin pool?
Thanks
|
|
|
|
BenRickert
|
|
November 10, 2017, 12:09:14 AM |
|
Hey Guys quick question, sorry if it has been answered already but I scanned the thread a little bit and can't really find it... What is the most profitable way to mine litecoin is it prohash? Or another litecoin pool?
Thanks
" Procrash" is going down more than a cheap hooker these days. They have too many miners and need to expand. As soon as the network gets too crowded they boot your miner. Honestly I've been renting my L3+ Hash on Nicehash. It's rock solid and pays very steady. They are always at the top of profitability for Scrypt. You may get a few more cents on switching pools but they are real PITA lately. I use Nicehash for primary and GranatGas as first fail over, then Prohashing for 3rd. I can count on one and in the last 2 months the number o times my units failed over off of Nicehash. On Procrashing, it's 2-3 times a day. Sucks.
|
|
|
|
jchi2210
|
|
November 10, 2017, 03:17:10 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
|
Halo Platform is one of the fastest Blockchains I've seen yet. They have FREE transactions. 250 Millisecond Block speeds. Smart contracts, Masternodes, blockchain games, and their own high speed DEX with BTC/ETH/USDC pairs. Similar to ETH, Waves, EOS, and more yet with only $1 million mcap. This video showcases the speed and reliability of the blockchain using the DEX, Masternodes (that will soon payout in BTC and ETH), blockchain games, and more! https://www.youtube.com/watch?v=g74d3ixX7E8&feature=youtu.be
|
|
|
lentyna
|
|
November 10, 2017, 03:27:29 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
I use Nicehash (pays in BTC only) for L3+ and granatgas for D3 (pays in a coin of your choice). L3+ PSU is different from the D3, L3+'s PSU has 18 connections and D3's PSU only 10. At least those are the ones I've got.
|
|
|
|
jchi2210
|
|
November 10, 2017, 03:46:06 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
I use Nicehash (pays in BTC only) for L3+ and granatgas for D3 (pays in a coin of your choice). L3+ PSU is different from the D3, L3+'s PSU has 18 connections and D3's PSU only 10. At least those are the ones I've got. Thanks for the suggestion! I'll probably start with nicehash and go from there I actually have the APW5 which has 20 connectors I was just wondering if it is feasible. I am waiting for my APW3's to come in the mail as well. I had bought some APW3's for the L3's but they "ran out of raw materials" so they gave me 50 dollar coupons for every one I had ordered and then switched them out with regular APW3's (10 connectors).
|
Halo Platform is one of the fastest Blockchains I've seen yet. They have FREE transactions. 250 Millisecond Block speeds. Smart contracts, Masternodes, blockchain games, and their own high speed DEX with BTC/ETH/USDC pairs. Similar to ETH, Waves, EOS, and more yet with only $1 million mcap. This video showcases the speed and reliability of the blockchain using the DEX, Masternodes (that will soon payout in BTC and ETH), blockchain games, and more! https://www.youtube.com/watch?v=g74d3ixX7E8&feature=youtu.be
|
|
|
ymemey
|
|
November 10, 2017, 07:52:46 AM |
|
guys, what about day earnings $ with 1 L3+ on Mining dutch or Prohashing?
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
November 10, 2017, 07:59:43 AM |
|
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
Antnoob
Newbie
Offline
Activity: 32
Merit: 0
|
|
November 10, 2017, 08:33:04 AM |
|
Guys, how about that: Recommended to use a fixed diff to get more stable hash set on password d=16 if you mine x11 or d=65536 if you mine scrypt You can set on D3s example is c=BTC,d=16 or for L3+ use d=65536 or higher than that Never tried it, does it make a difference? I was thinking that setting a fixed difficulty will prevent it from mining different coins, thus making the multipool useless, but I guess I deserve my nickname .
|
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
|
November 10, 2017, 10:10:41 AM |
|
guys, what about day earnings $ with 1 L3+ on Mining dutch or Prohashing?
I'm getting between $15 and $17 before electric. It also depends how many times it switches to the failover.
|
|
|
|
ayatoslaw
Jr. Member
Offline
Activity: 49
Merit: 1
|
|
November 10, 2017, 10:24:27 AM |
|
Surely this should be relocated to the altcoin mining section though. >>> yeah I think so that bro, , the altcoin mining section though
|
|
|
|
thiec
|
|
November 11, 2017, 04:09:38 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
Since APW5 have 2600W run in 240V, you may power up 1 L3+ (700W-800W) and 1 D3 (1000W-1200W) and even with 2 D3 will do.
|
|
|
|
jchi2210
|
|
November 11, 2017, 05:47:37 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
Since APW5 have 2600W run in 240V, you may power up 1 L3+ (700W-800W) and 1 D3 (1000W-1200W) and even with 2 D3 will do. Thank you! I just wanted to verify my thinking and bounce it off of you guys.. ON a side note, I got 2 of the L3's hooked up and running. Do these run hot? I attached a picture below of the temps and was wondering if those are Celsius or Fahrenheit? My last S9 was Fahrenheit and it usually ran about 70 - 72 and I kept it cool. As it is, it is really cool inside my mining room right now and I have a fan on both of them..plus its winter. So i'm wondering because if the picture below is of Celsius, wouldn't that equate out to about 130 fahrenheit? Just confused because I don't see how they could be 53 Fahrenheit, but I also don't see how they could be 130 Fahrenheit because it is cool in here and the miners themselves are cool to the touch. I'd say its about 65 degrees Fahrenheit currently in here. https://imgur.com/w0zXW0u
|
Halo Platform is one of the fastest Blockchains I've seen yet. They have FREE transactions. 250 Millisecond Block speeds. Smart contracts, Masternodes, blockchain games, and their own high speed DEX with BTC/ETH/USDC pairs. Similar to ETH, Waves, EOS, and more yet with only $1 million mcap. This video showcases the speed and reliability of the blockchain using the DEX, Masternodes (that will soon payout in BTC and ETH), blockchain games, and more! https://www.youtube.com/watch?v=g74d3ixX7E8&feature=youtu.be
|
|
|
BGRUN
Member
Offline
Activity: 73
Merit: 10
|
|
November 11, 2017, 08:40:12 AM |
|
Celsius always
|
|
|
|
BGRUN
Member
Offline
Activity: 73
Merit: 10
|
|
November 11, 2017, 08:46:24 AM |
|
$1,586.00 usd Shipping 21st to 29th of December no chance of this ROI'ing.....hell , there are what 4 batches in the wind yet just from Bitmain of Scrypt-Pow? so, going the x11 route of mining AIR Searing L3+ will ROI don't worry You remember that you was crying at the past with your TITANS and the early batch of L3+s that you will not ROI ... and you ROI ! Litecoin + other srypt coins are attracting investors ....
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
November 11, 2017, 12:15:17 PM |
|
$1,586.00 usd Shipping 21st to 29th of December no chance of this ROI'ing.....hell , there are what 4 batches in the wind yet just from Bitmain of Scrypt-Pow? so, going the x11 route of mining AIR Searing L3+ will ROI don't worry You remember that you was crying at the past with your TITANS and the early batch of L3+s that you will not ROI ... and you ROI ! Litecoin + other srypt coins are attracting investors ... I'm fine with getting an L3+ (if you use fiat and not crypto) on an expected price pump of LTC and scrypt-pow...but to use crypto now at this difficulty on the hope of crypto rising ..you are better off holding your coin..than using it on equip imho an example is those using btc before the pump and getting equip after so take out a loan...buy a unit that way for giggles....if you get in trouble with the loan than cash out some of your crypto hoard...hopefully at a better price I'm off the wagon for using crypto for equip at this point in time ...via bitmain prices and current difficulty and 2-3 month arrival So if you are betting on a price pump to justify your equip, just mine what you got and hodl , you can always revist using crypto for equip later as to the titans 2014 was an ugly year ..I had a tagline like my 'never to roi piece of sh*t knc titans....1.80 LTC etc was annoying luckily, the knc titans are too frigging evil to die......touchy bas*ards that they are....( I never could make eye contact in basement when doing laundry with them or they would get miffed and brick themselves) anyway, my take on current bitmain toasters
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
BenRickert
|
|
November 12, 2017, 01:40:27 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
Since APW5 have 2600W run in 240V, you may power up 1 L3+ (700W-800W) and 1 D3 (1000W-1200W) and even with 2 D3 will do. Thank you! I just wanted to verify my thinking and bounce it off of you guys.. ON a side note, I got 2 of the L3's hooked up and running. Do these run hot? I attached a picture below of the temps and was wondering if those are Celsius or Fahrenheit? My last S9 was Fahrenheit and it usually ran about 70 - 72 and I kept it cool. As it is, it is really cool inside my mining room right now and I have a fan on both of them..plus its winter. So i'm wondering because if the picture below is of Celsius, wouldn't that equate out to about 130 fahrenheit? Just confused because I don't see how they could be 53 Fahrenheit, but I also don't see how they could be 130 Fahrenheit because it is cool in here and the miners themselves are cool to the touch. I'd say its about 65 degrees Fahrenheit currently in here. https://imgur.com/w0zXW0uThose are Celsius temps bit also they are fine. Remember those are the actual "chip temps". It seems crazy but they are fine at those temps F. The chips have Heat syncs on them that dissipate that heat very quickly. The L3+ doesn't start cooking off until > 70 c. D3's start eating themselves > 72-74C The S9's....geeez who knows. Those things are Tanks! I don't like it when they go North of 80c but mine still run fine there. Unbelievable. I make sure they stay below 74-76c.
|
|
|
|
Albortz
Sr. Member
Offline
Activity: 420
Merit: 250
Tax Attorney - Investor - Entrepreneur
|
|
November 12, 2017, 11:52:19 AM |
|
I just got my 3 L3+ in and I was wondering if anyone could recommend a good pool? I'm leaning towards nicehash although I've never used it. What do you guys think? Does nicehash payout in LTC or do they payout in something else? I was also considering granatgas as a second or if someone thinks they are better maybe use them as my primary.
Also, I have 2 APW5's coming in the mail, do you guys think it will be ok to run 2 LTC miners off of 1 miner and then 1 L3+ miner and 1 D3 miner off of the other? I'm running 240V with really good thick wiring including the PSU cord. I saw the APW5 was rated for up to 2600. Although if I had 1 L3+ and 1 D3 on it I would only be at about 2000 to 2100 maximum. Any thoughts?
Since APW5 have 2600W run in 240V, you may power up 1 L3+ (700W-800W) and 1 D3 (1000W-1200W) and even with 2 D3 will do. Thank you! I just wanted to verify my thinking and bounce it off of you guys.. ON a side note, I got 2 of the L3's hooked up and running. Do these run hot? I attached a picture below of the temps and was wondering if those are Celsius or Fahrenheit? My last S9 was Fahrenheit and it usually ran about 70 - 72 and I kept it cool. As it is, it is really cool inside my mining room right now and I have a fan on both of them..plus its winter. So i'm wondering because if the picture below is of Celsius, wouldn't that equate out to about 130 fahrenheit? Just confused because I don't see how they could be 53 Fahrenheit, but I also don't see how they could be 130 Fahrenheit because it is cool in here and the miners themselves are cool to the touch. I'd say its about 65 degrees Fahrenheit currently in here. https://imgur.com/w0zXW0uJust make sure you click the box that the miner turns off over 80°C and put the fan speed on a steady 90% or 97%. This will cool the miners chips a lot more.
|
|
|
|
kodokbuduk
|
|
November 12, 2017, 11:57:50 AM |
|
bitmain website crashed
|
|
|
|
jchi2210
|
|
November 12, 2017, 09:20:41 PM |
|
I was going to give prohash a try to see how it compares to nicehash, but it seems they are truly maxed out lol. They won't let me register, it says that there are already 20,000 users and they are maxed out.
|
Halo Platform is one of the fastest Blockchains I've seen yet. They have FREE transactions. 250 Millisecond Block speeds. Smart contracts, Masternodes, blockchain games, and their own high speed DEX with BTC/ETH/USDC pairs. Similar to ETH, Waves, EOS, and more yet with only $1 million mcap. This video showcases the speed and reliability of the blockchain using the DEX, Masternodes (that will soon payout in BTC and ETH), blockchain games, and more! https://www.youtube.com/watch?v=g74d3ixX7E8&feature=youtu.be
|
|
|
|