Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 05:31:22 PM |
|
Well shit. That intimidates me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Gutcheck says I should wait for USB bootloader. Thanks for the info.
|
|
|
|
silicont
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 87
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 06:50:35 PM |
|
Even though I had my chips refunded, I'm hoping to hear what is available for purchase now that everything is working. Is it looking like a miner can be purchased with instock chips? Patience, I know, patience.
|
|
|
|
jesse11
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 333
Merit: 250
Ants Rock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 07:59:52 PM |
|
Im not clear on how the fans are powered. I thought they were powered from the Klondike itself.
Do we have to get cables for the fans? what kind of cables? Molex to 2 pin adapters?
Yes you need to power them,I made my own 4pin molex cables ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi63.photobucket.com%2Falbums%2Fh148%2FBigblock462%2FProfit%2520calc%2FBFL%252030GH%2FDSC02488_zpsda4dd1ec.jpg&t=665&c=KHP_CKUmlK0APw) Why did you make the power connect? We will have a diykit included with our miners...
|
Mining with: BE's,BE Cubes, K16's, AntMiners U1's and AntMiners S1's
|
|
|
markm
Legendary
Offline
Activity: 2940
Merit: 1090
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 08:04:05 PM |
|
What exactly are those cables, then? I don't see 4-pin ATX type there. What is the one plugged into itself? Six-pin PCI-e extension cable?
I have been trying to prepare for my boards, I have a bunch of power supplies that have four or five four-pin ATX plugs that used to be for old-style IDE hard-drives, I was going to get a bunch of converters to turn those into six-pin PCI-e, is that what I need?
What is that little cable, for the fan? What does it need from the power supply? A local shop has a lot of things that splice in a tree pin female fan connector with only two actual pins in it between a male and female ATX four-pin so as to allow the four-pin still to be useable while the fan connector also gets in there. Would that work?
-MarkM-
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 08:04:50 PM |
|
Im not clear on how the fans are powered. I thought they were powered from the Klondike itself.
Do we have to get cables for the fans? what kind of cables? Molex to 2 pin adapters?
Yes you need to power them,I made my own 4pin molex cables ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Why did you make the power connect? We will have a diykit included with our miners... Because I needed longer cables with more "outlets" or connections & I figured I'd save Steamboat a few bucks(I picked mine up in person,so he he could have the shipping fee too),not much,but every bit helps ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
jesse11
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 333
Merit: 250
Ants Rock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 08:07:49 PM |
|
Good Man Unacceptable, always looking out for the other guy! Glad your on the team ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
Mining with: BE's,BE Cubes, K16's, AntMiners U1's and AntMiners S1's
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 08:16:48 PM |
|
What exactly are those cables, then? I don't see 4-pin ATX type there. What is the one plugged into itself? Six-pin PCI-e extension cable?
I have been trying to prepare for my boards, I have a bunch of power supplies that have four or five four-pin ATX plugs that used to be for old-style IDE hard-drives, I was going to get a bunch of converters to turn those into six-pin PCI-e, is that what I need?
What is that little cable, for the fan? What does it need from the power supply? A local shop has a lot of things that splice in a tree pin female fan connector with only two actual pins in it between a male and female ATX four-pin so as to allow the four-pin still to be useable while the fan connector also gets in there. Would that work?
-MarkM-
Yes,its a 6 pin PCIE extention or a splitter,they have them also.Next you need a USB to mini cable,like for camera.The little cable on the bottom is for "daisychaining" ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I got some of these,get the pins too: http://www.frozencpu.com/products/1926/ele-94/FrozenCPU_ConnectRight_Standard_4-pin_Male_Connector_-_Black.html& scavange the 2-4 chained molex cables from old PSU's ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Same for PCIE: http://www.frozencpu.com/products/8620/ele-361/FrozenCPU_ConnectRight_6-pin_Male_PCI-Express_Power_Connector_-_Black.html?tl=g51c385s1005
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
markm
Legendary
Offline
Activity: 2940
Merit: 1090
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 08:28:52 PM |
|
Yike I don't want to crimp my own cables. I picked up a bunch of cheap old power supplies and am looking for adapters to use with them.
The place I got them has converters that will convert one four-pin ATX to one six-pin PCI-e and it looks like I will have enough without needing to split one into two.
Any idea how much actual power the boards use? Most of the power supplies are in the 200 to 350 watts range I think, hopefully each of their four-pin ATX connectors can power one board.
This is the first I heard of needing some special kind of USB cable, don't they come with cables? I paid for the whole thing, assembly, testing, no DIY...
All the boards and hubs and so on I got in the past all came with whatever connector cables they needed for data. These don't?
-MarkM-
|
|
|
|
sprint347
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 10:35:36 PM |
|
I expect there will be people still chasing chip repayments.
Because I've already paid for a miner/assembly/testing/shipping I expect Steamboat would prefer to go ahead with the order.
If anyone wants to sell 16 chips let me know. Now we have a working unit and we know SB is alive I'm happy to take a miner.
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 11:09:30 PM |
|
Yike I don't want to crimp my own cables. I picked up a bunch of cheap old power supplies and am looking for adapters to use with them.
The place I got them has converters that will convert one four-pin ATX to one six-pin PCI-e and it looks like I will have enough without needing to split one into two.
Any idea how much actual power the boards use? Most of the power supplies are in the 200 to 350 watts range I think, hopefully each of their four-pin ATX connectors can power one board.
This is the first I heard of needing some special kind of USB cable, don't they come with cables? I paid for the whole thing, assembly, testing, no DIY...
All the boards and hubs and so on I got in the past all came with whatever connector cables they needed for data. These don't?
-MarkM-
I figure 50 watts per miner as worse case scenario,especially if you OC them above 350-400MHz.Yes one dual 4 pin to 6 pin per board should be fine.200 watt unit I'd only run 3 miners so you don't overload the PSU,always leave headroom power wise.Do not assume 200 watts can do 4 units,its too close to the max of the PSU.Better safe than sorry. The miners do come with cables (PCIE extention & splitter if more than 2 units ordered,USB cable) as seen in jesse's post pic,if you ordered more than one I believe they will include a 6 pin splitter for every two units ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
fasmax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 25, 2013, 11:37:04 PM |
|
Yike I don't want to crimp my own cables. I picked up a bunch of cheap old power supplies and am looking for adapters to use with them.
The place I got them has converters that will convert one four-pin ATX to one six-pin PCI-e and it looks like I will have enough without needing to split one into two.
Any idea how much actual power the boards use? Most of the power supplies are in the 200 to 350 watts range I think, hopefully each of their four-pin ATX connectors can power one board.
This is the first I heard of needing some special kind of USB cable, don't they come with cables? I paid for the whole thing, assembly, testing, no DIY...
All the boards and hubs and so on I got in the past all came with whatever connector cables they needed for data. These don't?
-MarkM-
I figure 50 watts per miner as worse case scenario,especially if you OC them above 350-400MHz.Yes one dual 4 pin to 6 pin per board should be fine.200 watt unit I'd only run 3 miners so you don't overload the PSU,always leave headroom power wise.Do not assume 200 watts can do 4 units,its too close to the max of the PSU.Better safe than sorry. The miners do come with cables (PCIE extention & splitter if more than 2 units ordered,USB cable) as seen in jesse's post pic,if you ordered more than one I believe they will include a 6 pin splitter for every two units ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) One other thing to check is the current rating of the power supply at 12 volts. Some older power supplies were optimized to output current at 5 volts. If the miner uses 50 watts then the current will be about 4.2 amps for each miner. Make sure your load on 12 volts is less that the current rating of the supply your using.
|
|
|
|
Rakessh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 26, 2013, 12:05:45 PM |
|
Oooh, got me a tracking number! Can't wait can't wait can't wait ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
-
|
|
|
ionstorm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 26, 2013, 03:55:43 PM Last edit: October 26, 2013, 11:21:30 PM by ionstorm |
|
Oooh, got me a tracking number! Can't wait can't wait can't wait ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) What number order were you and what shipped? Fedex ups or USPS? Would love for ups to notify me of new shipments if that's what he uses. Awesome
|
|
|
|
cardcomm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 26, 2013, 06:14:58 PM |
|
I see reports of miners shipping. Does that mean the USB bootloader code is finished, or did you have the units shipped as-is?
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 01:05:11 AM |
|
I see reports of miners shipping. Does that mean the USB bootloader code is finished, or did you have the units shipped as-is?
Pretty sure they are only shipping out as-is units without the USB bootloader code. With any luck, we'll get some good news on that front real damn soon now.
|
|
|
|
kslaughter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 02:10:23 AM |
|
I see reports of miners shipping. Does that mean the USB bootloader code is finished, or did you have the units shipped as-is?
Pretty sure they are only shipping out as-is units without the USB bootloader code. With any luck, we'll get some good news on that front real damn soon now. Received my order of Klondikes today. Great packaging no damage. The units look great and had all the cables to connect the units. Great job Steamboat! Edit: These are as-is units as I can get the hardware to program them.
|
|
|
|
ScaryHash
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 02:30:54 AM |
|
I see reports of miners shipping. Does that mean the USB bootloader code is finished, or did you have the units shipped as-is?
Pretty sure they are only shipping out as-is units without the USB bootloader code. With any luck, we'll get some good news on that front real damn soon now. Received my order of Klondikes today. Great packaging no damage. The units look great and had all the cables to connect the units. Great job Steamboat! Edit: These are as-is units as I can get the hardware to program them. Can you hash with the units as they are? If they are hashing fine, and the bug in the firmware has been fixed, why would we need to re-program them? Just for a 0.5% drop in HW error rate? I've got some units I ordered, and I'd actually like to hash with them before the end of 2013.
|
|
|
|
Bakal
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 03:17:56 AM |
|
any news on the part where those things will be hosted?
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 03:26:42 AM |
|
I see reports of miners shipping. Does that mean the USB bootloader code is finished, or did you have the units shipped as-is?
Pretty sure they are only shipping out as-is units without the USB bootloader code. With any luck, we'll get some good news on that front real damn soon now. Received my order of Klondikes today. Great packaging no damage. The units look great and had all the cables to connect the units. Great job Steamboat! Edit: These are as-is units as I can get the hardware to program them. Can you hash with the units as they are? If they are hashing fine, and the bug in the firmware has been fixed, why would we need to re-program them? Just for a 0.5% drop in HW error rate? I've got some units I ordered, and I'd actually like to hash with them before the end of 2013. Yes they work just fine as far I can tell ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Not sure what the new updates can do for these,but at 350MHz I'm gettin 5.5GH ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Temps are 52-59c,but a good fan blowing on the backside helps alot.
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 27, 2013, 05:40:54 AM |
|
Yes they work just fine as far I can tell ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Not sure what the new updates can do for these,but at 350MHz I'm gettin 5.5GH ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Temps are 52-59c,but a good fan blowing on the backside helps alot. Thanks for this. Just shot off an email to Steamboat to have my units shipped. Will pick up a programmer off ebay. Thank you for all your updates !
|
|
|
|
|