smajser
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 04, 2018, 09:38:27 AM |
|
Hi @dstm,
I have one question regarding pool failover.
For example i have "pool1" and "pool2" in configuration file. "Pool1" stops responding and miner connects to "pool2". Does miner check if "pool1" is online and reverts to it or it stays on "pool2" until that one fails to respond?
Best regards
|
|
|
|
jpl
Member
Offline
Activity: 154
Merit: 11
|
|
June 05, 2018, 03:08:41 AM |
|
ive been trying to troubleshoot problemati gpu(s) in dstm 0.6.1 with SMOS, and it seems like 1 or 2 of my cards have issues so im using "--dev 0 1 2 4 5" to run all but one card at a time
however, its resulted in the console outputting only the stats of gpu#4 line after line. no stats are given for the other cards or overall hashrate
i should be getting 1600-2000sols if 5 cards are functional - and i do seem to get that poolside, but the lack of console output makes tuning tough
UPDATE: running either card 4 and/or card 5 alone reveals that both work terribly (either giving only stats for one gpu, or doing nothing at all except getting difficulty changes and rebooting.
i know the cards are problematic, but in windows they cooperated at aleast - i dont know what the issue is here (swapping risers is my next step)
Yeah, you gotta go through the power cable swap,.. riser swap steps. I ended up getting a different power supply and it fixed all my woes here. (thermaltake much better than evga here) And make sure you give enough time for the card to be recongnized.. almost 5 to 10 minutes sometimes.
|
|
|
|
blackjec
Newbie
Offline
Activity: 20
Merit: 0
|
|
June 05, 2018, 04:41:46 AM |
|
Anyone else having an issue with the --intensity setting or am I doing it wrong? No matter what I set it at, my GPU is around a 25% load.
I have a single 1070ti Founders Edition and I've tried "--intensity=0:0.5" all the way up to "--intensity=0:0.95" and it's still around a 25% load.
Try run with config file, without additional command line params. For example (from my config file): and run
|
|
|
|
Andrey09
Newbie
Offline
Activity: 176
Merit: 0
|
|
June 05, 2018, 07:42:15 AM |
|
Hello DSTM, what's new to expect from v7.0 ? You saw a tablet for GDDR 5X? It is impossible to use it for Equihash in dstm ?
|
|
|
|
BigFish47
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 05, 2018, 04:21:48 PM |
|
Try run with config file, without additional command line params.
I just tried it with this line in the zm.cfg file: intensity=0:0.5 Its still around 25% loaded with about a quarter of the Sol/s.
|
|
|
|
En@Ble
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 06, 2018, 01:04:23 AM |
|
Hi DSTM! can I find out if Zhash(144.5) support will be and how soon?
|
|
|
|
Coin++
|
|
June 07, 2018, 08:58:28 AM |
|
Hi DSTM! can I find out if Zhash(144.5) support will be and how soon?
ZHash is a new algo made by the BTCz decentralized team : it is a equihash variant (more ASIC resistant than the currents versions). It would be possible to make ZM compatible.
|
|
|
|
heavyarms1912
|
|
June 08, 2018, 10:40:56 PM |
|
msi gtx Duke 1080 OC +150 core +600 mem @ 70% Power
GPU0 52C Sol/s: 580.0 Sol/W: 4.05 Avg: 580.0
|
|
|
|
d4v1dv00
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 09, 2018, 12:51:49 PM |
|
Try run with config file, without additional command line params.
I just tried it with this line in the zm.cfg file: intensity=0:0.5 Its still around 25% loaded with about a quarter of the Sol/s. I share the same here.
|
|
|
|
chaostic
Newbie
Offline
Activity: 22
Merit: 2
|
|
June 09, 2018, 03:35:44 PM |
|
msi gtx Duke 1080 OC +150 core +600 mem @ 70% Power
GPU0 52C Sol/s: 580.0 Sol/W: 4.05 Avg: 580.0
You must be aiming for conserving power because my 1070 ti gets 560ish souls 194/900 89% TPD 4 souls/watt is nice tho i guess
|
|
|
|
Elange
Newbie
Offline
Activity: 73
Merit: 0
|
|
June 09, 2018, 10:32:19 PM |
|
Hi DSTM.
Is it possible to use same GPU numbering as system (Linux for me?). Its too hard to identify GPUs if a GPU throws an error. Also, is it possible to keep the old format for --temp-limit NN to apply it to ALL GPUs?
Thanks!
|
|
|
|
EPEMA
Jr. Member
Offline
Activity: 53
Merit: 4
|
|
June 11, 2018, 11:45:55 AM |
|
Hi DSTM! can I find out if Zhash(144.5) support will be and how soon?
ZHash is a new algo made by the BTCz decentralized team : it is a equihash variant (more ASIC resistant than the currents versions). It would be possible to make ZM compatible. I join the question of ZHash support (Equihash 144,5) We should pay attention to this algorithm as it will be popular, except for BTCZ it is implemented by BTG and I suppose that ZCL too can pass to it, the developers of BTCZ previously cooperated with the ZCL team ...
|
|
|
|
WR-104
Newbie
Offline
Activity: 52
Merit: 0
|
|
June 11, 2018, 07:37:01 PM |
|
GPU0 63C 75% | 536.7 Sol/s 540.8 Avg 289.0 I/s | 3.36 S/W 158 W | 0.35 100 124 plz tell me what is 75% in this output?
|
|
|
|
Morama
Member
Offline
Activity: 104
Merit: 44
|
|
June 11, 2018, 07:49:11 PM |
|
GPU0 63C 75% | 536.7 Sol/s 540.8 Avg 289.0 I/s | 3.36 S/W 158 W | 0.35 100 124 plz tell me what is 75% in this output? Fan Speed
|
|
|
|
heavyarms1912
|
|
June 11, 2018, 09:51:09 PM |
|
msi gtx Duke 1080 OC +150 core +600 mem @ 70% Power
GPU0 52C Sol/s: 580.0 Sol/W: 4.05 Avg: 580.0
You must be aiming for conserving power because my 1070 ti gets 560ish souls 194/900 89% TPD 4 souls/watt is nice tho i guess Yup. Trying to keep the Efficiency high. Doesn't make sense to burn more power these days for a few additional Sols.
|
|
|
|
hnbee
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 11, 2018, 10:52:45 PM |
|
It will be great if you adapt the miner to ZHash.
|
|
|
|
rbrtbnnrmn
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 12, 2018, 11:40:17 PM Last edit: June 13, 2018, 03:45:53 AM by rbrtbnnrmn |
|
0.6.0 works great with simplemining on various pools. when i try to use 0.6.1 it does not seem to work very well. most of the cards are under performing by quite a bit. any ideas what is going on ? all the same 1070 8gb cards and overclock settings
0.6.0
_ GPU3 53C Sol/s: 442.9 Sol/W: 4.28 Avg: 448.3 I/s: 240.2 Sh: 47.18 1.00 21 _ GPU0 54C Sol/s: 443.3 Sol/W: 4.25 Avg: 445.0 I/s: 238.6 Sh: 57.57 1.00 31 _ GPU4 54C Sol/s: 436.4 Sol/W: 4.23 Avg: 433.9 I/s: 233.2 Sh: 57.55 1.00 29 _ GPU8 59C Sol/s: 432.2 Sol/W: 4.22 Avg: 433.8 I/s: 233.6 Sh: 63.42 1.00 21 _ GPU9 46C Sol/s: 451.3 Sol/W: 4.26 Avg: 448.4 I/s: 240.9 Sh: 41.52 1.00 22 _ GPU2 53C Sol/s: 439.0 Sol/W: 4.21 Avg: 442.0 I/s: 236.8 Sh: 51.86 1.00 28 _ GPU5 51C Sol/s: 446.9 Sol/W: 4.28 Avg: 447.9 I/s: 239.6 Sh: 33.41 1.00 27 _ GPU7 55C Sol/s: 443.6 Sol/W: 4.24 Avg: 444.8 I/s: 236.8 Sh: 49.51 1.00 28 _ GPU6 51C Sol/s: 450.1 Sol/W: 4.29 Avg: 448.9 I/s: 239.1 Sh: 37.95 1.00 21 _ GPU1 52C Sol/s: 444.8 Sol/W: 4.28 Avg: 447.7 I/s: 238.8 Sh: 39.03 1.00 21 _ GPU10 54C Sol/s: 448.8 Sol/W: 4.21 Avg: 445.0 I/s: 236.8 Sh: 55.26 1.00 39 _ GPU11 47C Sol/s: 442.8 Sol/W: 4.33 Avg: 450.3 I/s: 241.1 Sh: 43.83 1.00 29 ========== Sol/s: 5322.0 Sol/W: 4.26 Avg: 5336.0 I/s: 2855.5 Sh: 578.09 1.00 26
0.6.1
_ GPU6 52C 70% | 391.1 Sol/s 391.1 Avg 208.5 I/s | 3.73 S/W 108 W | 59.79 100 27 _ GPU3 53C 70% | 455.7 Sol/s 455.7 Avg 245.5 I/s | 4.36 S/W 102 W | 50.63 100 28 _ GPU1 52C 70% | 454.2 Sol/s 454.2 Avg 243.7 I/s | 4.36 S/W 104 W | 76.15 100 29 _ GPU4 54C 70% | 454.8 Sol/s 454.8 Avg 238.6 I/s | 4.34 S/W 104 W | 78.39 100 26 _ GPU7 55C 70% | 150.2 Sol/s 150.2 Avg 82.0 I/s | 1.61 S/W 95 W | 25.24 100 32 _ GPU8 59C 70% | 373.5 Sol/s 373.5 Avg 199.9 I/s | 3.42 S/W 97 W | 39.10 100 31 _ GPU2 53C 70% | 449.7 Sol/s 449.7 Avg 241.4 I/s | 4.36 S/W 103 W | 39.05 100 24 _ GPU0 54C 70% | 458.9 Sol/s 458.9 Avg 243.5 I/s | 4.36 S/W 104 W | 73.80 100 26 _ GPU5 51C 70% | 164.1 Sol/s 164.1 Avg 85.8 I/s | 1.90 S/W 90 W | 25.29 100 28 _ GPU9 46C 70% | 145.3 Sol/s 145.3 Avg 77.3 I/s | 1.61 S/W 95 W | 18.40 100 24 _ GPU10 54C 70% | 372.3 Sol/s 372.3 Avg 200.5 I/s | 3.44 S/W 112 W | 53.06 100 28 _ GPU11 45C 70% | 128.4 Sol/s 128.4 Avg 69.6 I/s | 1.52 S/W 78 W | 16.02 100 24 ============== | 3998.3 Sol/s 3998.3 Avg 2136.2 I/s | 3.25 S/W 1200 W | 554.91 100 27
|
|
|
|
paranoid247
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 13, 2018, 01:57:03 AM |
|
anyone else noticed the price drop in zec. how low will it go with asic mining taking over?
|
|
|
|
jpl
Member
Offline
Activity: 154
Merit: 11
|
|
June 13, 2018, 05:12:16 AM |
|
anyone else noticed the price drop in zec. how low will it go with asic mining taking over?
Yep.. both my miners are almost 1000 sol/s lower.. but the graph on flypool looks higher. Not sure what is up. I bet Nviidia is in on this too. Why would they not be. They want us to buy newer cards to drive up their stocks, especially since it's a slow time on their graphs on the 'in between' of new cards coming out.
|
|
|
|
paranoid247
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 13, 2018, 08:01:49 AM |
|
further pushes out the roi on my 3 GTX 1080's
|
|
|
|
|