Phoenix48
Newbie
Offline
Activity: 43
Merit: 0
|
|
May 24, 2014, 05:34:38 PM |
|
I looked in my sphsgminer/kernel folder in multiminer and i was surprised to see a "keccak.cl" kernel there. I didn't tried it because of the error to chose a keccak miner in multiminer but maybe we can already mine keccak with sphsgminer. May worth a look into this...
Nah - good call but I checked this before. It's in there for the Darkcoin / X11 support. Keccak is one of the algos used by X11. But support for independently mining Keccak isn't in there. Sorry to hear that. How about adding the "cgminer-3.7.3-maxcoin-windows" miner to mine keccak? It appears to be the best to miner for keccak out there and that way all the coins in coinwarz would be covered.
|
|
|
|
nwoolls (OP)
|
|
May 24, 2014, 05:41:56 PM |
|
Sorry to hear that. How about adding the "cgminer-3.7.3-maxcoin-windows" miner to mine keccak? It appears to be the best to miner for keccak out there and that way all the coins in coinwarz would be covered.
Sure I'll check it out. Thanks again for the suggestions and insight on these algorithms. If it works like the rest of the *GMiner forks it should be easy enough to drop in for 3.1.
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
May 24, 2014, 10:09:41 PM |
|
That makes sense and I know how busy you are so I do not blame you. I don't have the skills to do that or I would. I have a Blade. How do I do the Pull Request? I am unable to send it out or I would have offered but if I can send you some data from it I will do so.
A Pull Request means you (or someone) would write the driver code and then contribute it back to us for BFGMiner. At this point I'm not interested in doing remote development or making a driver by trial-and-error. It's just not something I have the time or bandwidth (or - to be frank - incentive) for.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
May 24, 2014, 10:46:08 PM |
|
A bit of oddness Nate. None of my systems are picking up the 3.0 update to update too. It is not live yet? Sorry to hear that. How about adding the "cgminer-3.7.3-maxcoin-windows" miner to mine keccak? It appears to be the best to miner for keccak out there and that way all the coins in coinwarz would be covered.
Sure I'll check it out. Thanks again for the suggestions and insight on these algorithms. If it works like the rest of the *GMiner forks it should be easy enough to drop in for 3.1.
|
|
|
|
Onicoman
Member
Offline
Activity: 70
Merit: 10
|
|
May 25, 2014, 12:31:41 AM |
|
Sorry for the noobish (?) in advance but This miner program has miner control and can do x11 agos right ?
|
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 12:38:59 AM |
|
A bit of oddness Nate. None of my systems are picking up the 3.0 update to update too. It is not live yet?
Hah - thanks for that! I have code in there not to prompt for major upgrades (I didn't want folks automatically upgrading from v1 to v2 as it removed CGMiner support). I guess I'll release a 2.8.10 that re-enables this to make it easier on folks. Nice catch
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
forzendiablo
Legendary
Offline
Activity: 1526
Merit: 1000
the grandpa of cryptos
|
|
May 25, 2014, 12:42:13 AM |
|
thats some good stuff!
|
yolo
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 01:12:49 AM |
|
Sorry for the noobish (?) in advance but This miner program has miner control and can do x11 agos right ?
Yes, you can mine X11 coins with MultiMiner and you can remotely monitor and control your mining using MobileMiner.
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
lcettuzzi
Newbie
Offline
Activity: 13
Merit: 0
|
|
May 25, 2014, 09:13:49 AM |
|
Hi.
I installed MultiMiner 3.0.1.
Now I'm trying to configure it for VertCoin but I'm getting problems.
In Coins Configuration I created Vertcoin with two different pools (both alive). Then I selected vertminer for Scrypt-N mining and placed the vertminer-0.5.2 folder (renamed to vertminer) in the folder appdata/local/multiminer/miners. But when starting mining vertcoin, MultiMiner always choses BFGminer as miner. Then I did the same thing with SGminer. But again, MultiMiner uses BFGminer.
What should I do to force MultiMiner to mine Scrypt-N with SGminer?
Thanks.
|
|
|
|
cxboyminer
|
|
May 25, 2014, 02:15:27 PM Last edit: May 25, 2014, 02:39:47 PM by cxboyminer |
|
Just made a video on how to use and install multiminer 2.8.10. Editing and will upload in a short while. Signature - My channel, feel free to subscribe! edit... Version 3.0.1 crashes and cannot detect GPU (intel HD 4000 )... seriously, it crashes.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
May 25, 2014, 03:31:34 PM |
|
Just made a video on how to use and install multiminer 2.8.10. Editing and will upload in a short while. Signature - My channel, feel free to subscribe! edit... Version 3.0.1 crashes and cannot detect GPU (intel HD 4000 )... seriously, it crashes. I could be way wrong but I don't think Intel GPU's (integrated) are capable of mining. MM could never detect my laptop GPU (Intel)
|
|
|
|
Mudbankkeith
|
|
May 25, 2014, 05:32:40 PM |
|
Just made a video on how to use and install multiminer 2.8.10. Editing and will upload in a short while. Signature - My channel, feel free to subscribe! edit... Version 3.0.1 crashes and cannot detect GPU (intel HD 4000 )... seriously, it crashes. I could be way wrong but I don't think Intel GPU's (integrated) are capable of mining. MM could never detect my laptop GPU (Intel) If they do connect it will cook off very rapidly.
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 05:46:28 PM |
|
In Coins Configuration I created Vertcoin with two different pools (both alive). Then I selected vertminer for Scrypt-N mining and placed the vertminer-0.5.2 folder (renamed to vertminer) in the folder appdata/local/multiminer/miners. But when starting mining vertcoin, MultiMiner always choses BFGminer as miner. Then I did the same thing with SGminer. But again, MultiMiner uses BFGminer.
What should I do to force MultiMiner to mine Scrypt-N with SGminer?
You don't need to download and place any miners anywhere. MultiMiner does that for you. Add a Coin configuration for Vertcoin. Make sure that it is set to Scrypt-N. Choose Vertcoin for your devices (using right-click) and click Start to start mining. If MultiMiner is using BFGMiner, then it sounds like you didn't specify Scrypt-N as the algorithm when adding Vertcoin. You could try removing and re-adding the Coin configuration. Or use CoinWarz instead of CoinChoose, since CoinWarz already has Vertcoin with the correct algorithm.
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 05:48:16 PM |
|
edit... Version 3.0.1 crashes and cannot detect GPU (intel HD 4000 )... seriously, it crashes. As others have said I doubt Intel GPUs are supported. That said, if you are seeing a MultiMiner crash, please post the details using copy & paste. Thanks
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
Aurum
|
|
May 25, 2014, 06:57:39 PM |
|
In Coins Configuration I created Vertcoin with two different pools (both alive). Then I selected vertminer for Scrypt-N mining and placed the vertminer-0.5.2 folder (renamed to vertminer) in the folder appdata/local/multiminer/miners. But when starting mining vertcoin, MultiMiner always choses BFGminer as miner. Then I did the same thing with SGminer. But again, MultiMiner uses BFGminer.
What should I do to force MultiMiner to mine Scrypt-N with SGminer?
You don't need to download and place any miners anywhere. MultiMiner does that for you. Add a Coin configuration for Vertcoin. Make sure that it is set to Scrypt-N. Choose Vertcoin for your devices (using right-click) and click Start to start mining. If MultiMiner is using BFGMiner, then it sounds like you didn't specify Scrypt-N as the algorithm when adding Vertcoin. You could try removing and re-adding the Coin configuration. Or use CoinWarz instead of CoinChoose, since CoinWarz already has Vertcoin with the correct algorithm. I did it the same way icy lettuce did it and it works great for me. He may have forgotten to Save and Restart at the right points and defaulted to sgminer. I had a VertMiner.conf but Mum 3.01 said that was a no-no and renamed it. I just converted to a command line format and defined my pools in Add Coin. It switches and mines great. Woolls yer awesome
|
ghghghfgh
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 08:03:41 PM |
|
I did it the same way icy lettuce did it and it works great for me. He may have forgotten to Save and Restart at the right points and defaulted to sgminer. I had a VertMiner.conf but Mum 3.01 said that was a no-no and renamed it. I just converted to a command line format and defined my pools in Add Coin. It switches and mines great. Woolls yer awesome Glad to hear it's working! Good reports all around from most folks. I have a few small fixes in store for a 3.0.2 release, and then 3.1 will add Keccak support along with potentially faster (but only if GPL compliant) X11 miners.
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
Onicoman
Member
Offline
Activity: 70
Merit: 10
|
|
May 25, 2014, 09:46:21 PM |
|
Sorry for the noobish (?) in advance but This miner program has miner control and can do x11 agos right ?
Yes, you can mine X11 coins with MultiMiner and you can remotely monitor and control your mining using MobileMiner. thanks man :-) would This be hard setting up or just download multiminee and pretty straight foreward ? Anny tips and info from current ukers would be great
|
|
|
|
nwoolls (OP)
|
|
May 25, 2014, 10:03:35 PM Last edit: May 25, 2014, 10:51:29 PM by nwoolls |
|
Sorry to hear that. How about adding the "cgminer-3.7.3-maxcoin-windows" miner to mine keccak? It appears to be the best to miner for keccak out there and that way all the coins in coinwarz would be covered.
Sure I'll check it out. Thanks again for the suggestions and insight on these algorithms. If it works like the rest of the *GMiner forks it should be easy enough to drop in for 3.1. And here is an early preview of 3.1 for folks who want to test out Keccak support: https://www.dropbox.com/s/nmy0vlhhpje5iw0/MultiMiner-3.1.0.zipWorks great on my rigs - looking forward to feedback!
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
May 25, 2014, 11:08:57 PM |
|
Sorry to hear that. How about adding the "cgminer-3.7.3-maxcoin-windows" miner to mine keccak? It appears to be the best to miner for keccak out there and that way all the coins in coinwarz would be covered.
Sure I'll check it out. Thanks again for the suggestions and insight on these algorithms. If it works like the rest of the *GMiner forks it should be easy enough to drop in for 3.1. And here is an early preview of 3.1 for folks who want to test out Keccak support: https://www.dropbox.com/s/nmy0vlhhpje5iw0/MultiMiner-3.1.0.zipWorks great on my rigs - looking forward to feedback! I will test this out on my gaming rig tonight, thanks much!
|
|
|
|
cxboyminer
|
|
May 25, 2014, 11:16:37 PM |
|
edit... Version 3.0.1 crashes and cannot detect GPU (intel HD 4000 )... seriously, it crashes. As others have said I doubt Intel GPUs are supported. That said, if you are seeing a MultiMiner crash, please post the details using copy & paste. Thanks v2.8.10 works perfectly... but not 3.0.1. I used intel hd 4000 just for YT, im not mining long term. Will post error later.
|
|
|
|
|