PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[waywoos]

I have MSI Mech OC RX 5700 XT bios modded in Windows 10 version 20H2. My overclock settings are: Core clock 1200, Core voltage 750, Memory clock 1800.
I only get 51,5 mh/s with Phoenix Miner 5.5c. This hasrate is equal with stock bios.
When I'm using Team Red Miner 0.8.0, the hashrate is 55,2 mh/s.
Is that something wrong with my GPU?

try these 1300 1820

try those to start

Wow... Thanks... Now the hashrate 55,8 mh/s.👍🙏

you can probably go up to 1840-1850 and increase more.

[waywoos]

try these 1300 1820

try those to start

thx

52.7Mh/s 92w

Asus Rog Strix Rx-5700 XT OC
NO BIOS MOD (W/bios Quiet)
 ???bios Performance bricked 

very thx

i dont know what you are saying. as far as i know the stryx is a model you want to stay away from modding.
i never told you to mod the card or helped in any way.
if you want more help i suggest go on discord and go join redpandamining .  they are the best

[Kiawpqe]

try these 1300 1820

try those to start

thx

52.7Mh/s 92w

Asus Rog Strix Rx-5700 XT OC
NO BIOS MOD (W/bios Quiet)
 ???bios Performance bricked 

very thx

i dont know what you are saying. as far as i know the stryx is a model you want to stay away from modding.
i never told you to mod the card or helped in any way.
if you want more help i suggest go on discord and go join redpandamining .  they are the best

nooo, calm friend '
the gpu has dualbios with a switch you select a bios P (Performance) or Q (Quiet).
the gpu came to me used and with the Bios P (bricked)
but nothing happens you can continue using the Q
Thanks for answering, I was only commenting on it because it is my first Rog 5700xt.
I did not say that you suggested me to modify the Bios
I'm older and I know about RBE, MPT, NAVI CURVE, ATIFLASH ......
THAT IS ONLY RESPONSIBLE WHO DOES IT WITHOUT KNOWING
I all my Rigs are BiosMOD by me.
but I bought it cheap like that.
thanks again here to try to help and be helped

[Kiawpqe]

2021.01.30:21:50:58.491: main *** 1:46 *** 1/30 21:50 **************************************
2021.01.30:21:50:58.491: main Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:46
2021.01.30:21:50:58.491: main Available GPUs for mining:
2021.01.30:21:50:58.491: main GPU1: AMD Radeon RX 5700 XT (pcie 13), OpenCL 2.0, 8 GB VRAM, 40 CUs
2021.01.30:21:50:58.491: main GPU1: 53C 56% 94W
GPU1: cclock 1300 MHz, cvddc 756 mV, mclock 1850 MHz, mvddc 850 mV, Tj 57C, Tmem 86C
GPUs power: 94.0 W; cost: 0.30 USD/day
2021.01.30:21:50:58.491: main Current -gt 0
2021.01.30:21:50:58.491: main Eth: Accepted shares 80 (0 stales), rejected shares 0 (0 stales)
2021.01.30:21:50:58.491: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.01.30:21:50:58.491: main Eth: Maximum difficulty of found share: 2433.4 GH (!)
2021.01.30:21:50:58.491: main Eth: Average speed (5 min): 53.487 MH/s
2021.01.30:21:50:58.491: main Eth: Effective speed: 50.19 MH/s; at pool: 50.19 MH/s
2021.01.30:21:50:58.491: main Eth: Estimated income: 5.02 USD/day
2021.01.30:21:50:58.695: main Eth speed: 53.745 MH/s, shares: 80/0/0, time: 1:46

 

[claudiodelf]

I have MSI Mech OC RX 5700 XT bios modded in Windows 10 version 20H2. My overclock settings are: Core clock 1200, Core voltage 750, Memory clock 1800.
I only get 51,5 mh/s with Phoenix Miner 5.5c. This hasrate is equal with stock bios.
When I'm using Team Red Miner 0.8.0, the hashrate is 55,2 mh/s.
Is that something wrong with my GPU?

     AMD RADEON

Frequenza 800- 1074-1350
Tensione    799 - 799-800
frequenze clock 1860
  99 watt  57,1MH/s


MSI AFTERBURNER
CORE VOLTAGE MV 800
CORE CLOCK MHZ 1400 
MEMORY CLOCK MHZ 1900
fan auto 51

[CoolTomik]

Hi, is there any way how to get power usage of each card and actual cclock MHz, cvddc mV, mclock MHz, p-state , pcap power over json remote query?

When i request over TCP/IP json - {"id":0,"jsonrpc":"2.0","method":"miner_getstat2"}
i get only

RESPONSE:
{"result": ["9.3 - ETH", "21", "182724;51;0", "30502;30457;30297;30481;30479;30505", "0;0;0", "off;off;off;off;off;off", "53;71;57;67;61;72;55;70;59;71;61;70", "eth-eu1.nanopool.org:9999", "0;0;0;0"]}
"9.3 - ETH"            - miner version.
"21"               - running time, in minutes.
"182724"            - total ETH hashrate in MH/s, number of ETH shares, number of ETH rejected shares.
"30502;30457;30297;30481;30479;30505"   - detailed ETH hashrate for all GPUs.
"0;0;0"               - total DCR hashrate in MH/s, number of DCR shares, number of DCR rejected shares.
"off;off;off;off;off;off"      - detailed DCR hashrate for all GPUs.
"53;71;57;67;61;72;55;70;59;71;61;70"   - Temperature and Fan speed(%) pairs for all GPUs.
"eth-eu1.nanopool.org:9999"      - current mining pool. For dual mode, there will be two pools here.
"0;0;0;0"            - number of ETH invalid shares, number of ETH pool switches, number of DCR invalid shares, number of DCR pool switches.

I get this over http on same port but its html and hard to parse it ... it will be nice get all possible info about GPUs ober json ...

when i use param  -hstats 2
-hstats <n>
Level of hardware monitoring: 0 - temperature and fan speed only; 1 - temperature, fan speed, and power; 2 - full (include core/memory clocks, voltages, P-states). The default is 1.


GPU1: 53C 65% 109W, GPU2: 42C 50% 118W, GPU3: 61C 65% 105W, GPU4: 36C 65% 118W, GPU5: 40C 50% 119W, GPU6: 70C 66% 99W, GPU7: 65C 65% 124W, GPU8: 58C 65% 108W, GPU9: 67C 70% 106W, GPU10: 60C 65% 112W, GPU11: 66C 70% 113W
GPU1: cclock 1695 MHz, cvddc 850 mV, mclock 4452 MHz, p-state P2, pcap power
GPU2: cclock 1936 MHz, cvddc 931 mV, mclock 4303 MHz, p-state P2, pcap no
GPU3: cclock 1759 MHz, cvddc 850 mV, mclock 4452 MHz, p-state P2, pcap temp

[crsminer]

2021.01.30:21:50:58.491: main *** 1:46 *** 1/30 21:50 **************************************
2021.01.30:21:50:58.491: main Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:46
2021.01.30:21:50:58.491: main Available GPUs for mining:
2021.01.30:21:50:58.491: main GPU1: AMD Radeon RX 5700 XT (pcie 13), OpenCL 2.0, 8 GB VRAM, 40 CUs
2021.01.30:21:50:58.491: main GPU1: 53C 56% 94W
GPU1: cclock 1300 MHz, cvddc 756 mV, mclock 1850 MHz, mvddc 850 mV, Tj 57C, Tmem 86C
GPUs power: 94.0 W; cost: 0.30 USD/day
2021.01.30:21:50:58.491: main Current -gt 0
2021.01.30:21:50:58.491: main Eth: Accepted shares 80 (0 stales), rejected shares 0 (0 stales)
2021.01.30:21:50:58.491: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.01.30:21:50:58.491: main Eth: Maximum difficulty of found share: 2433.4 GH (!)
2021.01.30:21:50:58.491: main Eth: Average speed (5 min): 53.487 MH/s
2021.01.30:21:50:58.491: main Eth: Effective speed: 50.19 MH/s; at pool: 50.19 MH/s
2021.01.30:21:50:58.491: main Eth: Estimated income: 5.02 USD/day
2021.01.30:21:50:58.695: main Eth speed: 53.745 MH/s, shares: 80/0/0, time: 1:46

 

Hi! What miner is this?

[Kiawpqe]

2021.01.30:21:50:58.491: main *** 1:46 *** 1/30 21:50 **************************************
2021.01.30:21:50:58.491: main Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:46
2021.01.30:21:50:58.491: main Available GPUs for mining:
2021.01.30:21:50:58.491: main GPU1: AMD Radeon RX 5700 XT (pcie 13), OpenCL 2.0, 8 GB VRAM, 40 CUs
2021.01.30:21:50:58.491: main GPU1: 53C 56% 94W
GPU1: cclock 1300 MHz, cvddc 756 mV, mclock 1850 MHz, mvddc 850 mV, Tj 57C, Tmem 86C
GPUs power: 94.0 W; cost: 0.30 USD/day
2021.01.30:21:50:58.491: main Current -gt 0
2021.01.30:21:50:58.491: main Eth: Accepted shares 80 (0 stales), rejected shares 0 (0 stales)
2021.01.30:21:50:58.491: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.01.30:21:50:58.491: main Eth: Maximum difficulty of found share: 2433.4 GH (!)
2021.01.30:21:50:58.491: main Eth: Average speed (5 min): 53.487 MH/s
2021.01.30:21:50:58.491: main Eth: Effective speed: 50.19 MH/s; at pool: 50.19 MH/s
2021.01.30:21:50:58.491: main Eth: Estimated income: 5.02 USD/day
2021.01.30:21:50:58.695: main Eth speed: 53.745 MH/s, shares: 80/0/0, time: 1:46

 

Hi! What miner is this?

PhoenixMiner 5.5c win-10-pro

[franktlp]

hi all,

im mining for a month with a RTX 2060 OC from ASUS, and im getting a hashrate of 26-28 MH/s, with standard settings. I've checking over the internet and seems that a better config is power settings 65% and memory +1000. Problem is I don't know where should I configure it, any ideas?

many thanks

[Kiawpqe]

hi all,

im mining for a month with a RTX 2060 OC from ASUS, and im getting a hashrate of 26-28 MH/s, with standard settings. I've checking over the internet and seems that a better config is power settings 65% and memory +1000. Problem is I don't know where should I configure it, any ideas?

many thanks

in .bat or config

[Blisk]

I have have RX 560 4Gb and fev months ago I mine on this card about 12 MH/s ETH
now I use settings for 4Gb cards and I get only 1.6 MH/s
Is that because of dag file or I have wrong settings??

[waywoos]

I have have RX 560 4Gb and fev months ago I mine on this card about 12 MH/s ETH
now I use settings for 4Gb cards and I get only 1.6 MH/s
Is that because of dag file or I have wrong settings??

dag issue. you will need a 6gb or higher gpu now
or switch to a hiveos or other non windows programs.  but even those will come to an end shortly

[Blisk]

I have have RX 560 4Gb and fev months ago I mine on this card about 12 MH/s ETH
now I use settings for 4Gb cards and I get only 1.6 MH/s
Is that because of dag file or I have wrong settings??

dag issue. you will need a 6gb or higher gpu now
or switch to a hiveos or other non windows programs.  but even those will come to an end shortly

I found out it is setting sissue.

[ryuzera]

Hello guys,

Can I ask here about my problem ?

I`m trying to mining eth with Phoenix Miner but i`m getting an error message


Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

CUDA version: 11.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 1650 (pcie 1), CUDA cap. 7.5, 4 GB VRAM, 14 CUs
Nvidia driver version: 461.40
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: ssl://asia1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://asia1.ethermine.org:5555 (proto: EthProxy)
GPU1: 29C 50% 10W
GPUs power: 10.3 W
Eth: Connected to SSL ethash pool asia1.ethermine.org:5555 (2606:4700:90:0:d80c:ff8b:7d45:b70e)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #13a2e45f from ssl://asia1.ethermine.org:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #d160df6f from ssl://asia1.ethermine.org:5555; diff: 4000MH
Light cache generated in 3.0 s (22.0 MB/s)
Eth: New job #ed4217ec from ssl://asia1.ethermine.org:5555; diff: 4000MH
Eth: New job #2009407e from ssl://asia1.ethermine.org:5555; diff: 4000MH
GPU1: Allocating DAG for epoch #392 (4.06) GB
CUDA error in CudaProgram.cu:388 : out of memory (2)
GPU1: CUDA memory: 4.00 GB total, 3.25 GB free
GPU1 initMiner error: out of memory
Fatal error detected. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00



Eth: New job #0d4111ed from ssl://asia1.ethermine.org:5555; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00



Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

Waiting 15 s for previous instance to close


Any ideas about what can I do to fix that ?

Thank you

If it`s the wrong place I apologize

[sirmathew]

Don't download the above hotfix as the author is NOT phoenixminer.

[MinerGuy82]

Hello.
How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...

Second question:

How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?

[nmisiti]

Hello everyone.
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?

From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  69%
GPU1: DAG  83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48)
Fatal error detected. Restarting.

From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s

GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10

[MinerGuy82]

Hello everyone.
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?

From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG  69%
GPU1: DAG  83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG  97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48) try to add -clkernel 0 on your file batch - should work, but a little bit unstable
Fatal error detected. Restarting.

From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s

GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10

[Sledge0001]

5.5c is the most recent version.

Always download the most recent version from page 1 of this thread.

If you do not you are most likely downloading and installing malware!

[batsonxl]

Hello.
How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...

Second question:

How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?

So many people reporting this.
Whats your virtual memory?
Driver version?
Did windows updated recently?
You can creat 2 bat files add 1 bat file -gpus 1,2,3 second bat file -gpus 4,5,6 you may want add -cdm 0 because you will get warning about monitor port but it doesnt importand it is just warning that port will not be availabe for monitoring.