PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[doctorman]

PhoenixMiner suddenly stopped working after I updated the nvidia drivers to version 460.79

It seems 460.79 is not good driver:
https://www.nicehash.com/blog/post/psa-do-not-update-to-nvidia-geforce-460-79-drivers

Can confirm I also installed the latest nvidida driver, it posts gpus then immediately exits program.

PSA: Do not update to NVIDIA GeForce 460.79 drivers!
Dear miners!

We urge you to not update your GPU drivers if you are mining with NVIDIA graphics cards. It looks like the latest GeForce 460.79 drivers cause problems and do not recognize the graphics card(s) in the system.

If you have already updated to the latest version, please revert back to the previous one and it should resolve the issues.

'

Trex posted just now the new version compatible with the new driver

did anyone compare TREX vs Phonex on TRX 3000 series?  does TREX still get higher hash

per this article, TREX  and phonex 5.1 were compared and the Trex was getting around 3% more,
https://2miners.com/blog/claymores-ethereum-miner-stops-working-best-alternatives/

[DooGZ]

hai all ...

recently, mya amd 4gb gpu, went down 2 mh each of them,
in every rig, amd gpu rig

it is just me, or u got the same
pls enlight with ur 4gb amd gpu status ...

thx ...

mine too, but not all RX 4gb are affected, yet.

[abg00]

Hello !

What may be the problem ?

Os Windows 10 x64

Unable to establish secure connection to ssl://eth.2miners.com:12020: certificate verify failed

use last pm with 20.4.2 drivers with this pool via epool.txt

POOL: stratum+ssl://eth.2miners.com:12020

[1qaz]

Hello !

What may be the problem ?

Os Windows 10 x64

Unable to establish secure connection to ssl://eth.2miners.com:12020: certificate verify failed

use last pm with 20.4.2 drivers with this pool via epool.txt

POOL: stratum+ssl://eth.2miners.com:12020

im use nvidia 431 driver , but im try stratum+ssl , thx

It's strange. on linux it's okay work ssl://eth.2miners.com:12020

Hello !

What may be the problem ?

Os Windows 10 x64

Unable to establish secure connection to ssl://eth.2miners.com:12020: certificate verify failed

Try

PhoenixMiner.exe -pool eth.2miners.com:2020 -wal 0x6cbdf1eb7e55c60a5fbcf8d09af98e6622c2b949 -worker Phoenix -epsw x -coin eth
pause

This is without a secure connection , I need a secure connection

[Geniusvzla]

Greetings, I hope you can help me solve this problem since the only way I can solve it is by restarting the platform.

could not connect to ethash pool PhoenixMiner -epool eth-eu1.nanopool.org:9999. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full

the error appears every 20 hours and the only thing I can do is restart

Sorry my bad english

i have same problem, i disabled all firewalls all protection stuff even from registry, not fixed.....i increased max port numbers to max not fixed.

lets try found out what we have common with you.

1.Are you using 2 phoenix miners at the same time i mean 1 for ETH and onother for ETC?
2.Are you monitoring using like chrome remote or teamviewer?

Greetings again, I only use 1 phoenix miner for ETH, I did not know that I could use another simultaneously for ETC, am I really missing something big here
I don't use Chrome Remote or TeamViewer.
The strangest thing is that I can't even navigate google. The Internet connection is blocked, Try to share the Internet connection of this platform to another by local network and it works with all normality. The last thing I need to do is format the platform

[PhoenixMiner]

(Reserved)

[PhoenixMiner]

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

(MEGA links are no longer active)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):

Code:

   File: PhoenixMiner_5.4b_Windows.zip
    ===================================
   SHA-1: 6a42d27493062ddcef6f2a12a348c6d4b68f65ce
 SHA-256: 53a5210e004ffa3fae3c3378004d1d369c21227e5e800f849a6c8e354fd7ca2c
 SHA-512: 6404648e6a6e5e3ef624ad6038351eb712ba3810070b4307557f42394e25e18d5d6e7760e472d3b17e286e23139ab573d444a0c900ac1c018374f8d25d3c6852

    File: PhoenixMiner_5.4b_Linux.tar.gz
    ====================================
   SHA-1: 434d3a9922a7ddc3f65d341cc7630032995e1e23
 SHA-256: a5f612dd151d06b9a1144a911d2ca1b351bb385dfc73fbd44888af24a2cf1122
 SHA-512: 98c4c09fe4bc144412a87eef506514d8cca9c8db9ba4acb95ec71ea7100969cc2411224175454d456b89184cc451a0bbaf5d60202d910aaba8c9e1cd1e15635e

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4b.

[Biterion]

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

https://mega.nz/folder/OJ9BCYaD#osOU-PywjweHqQkux8rpbQ  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):

Code:

   File: PhoenixMiner_5.4b_Windows.zip
    ===================================
   SHA-1: 6a42d27493062ddcef6f2a12a348c6d4b68f65ce
 SHA-256: 53a5210e004ffa3fae3c3378004d1d369c21227e5e800f849a6c8e354fd7ca2c
 SHA-512: 6404648e6a6e5e3ef624ad6038351eb712ba3810070b4307557f42394e25e18d5d6e7760e472d3b17e286e23139ab573d444a0c900ac1c018374f8d25d3c6852

    File: PhoenixMiner_5.4b_Linux.tar.gz
    ====================================
   SHA-1: 434d3a9922a7ddc3f65d341cc7630032995e1e23
 SHA-256: a5f612dd151d06b9a1144a911d2ca1b351bb385dfc73fbd44888af24a2cf1122
 SHA-512: 98c4c09fe4bc144412a87eef506514d8cca9c8db9ba4acb95ec71ea7100969cc2411224175454d456b89184cc451a0bbaf5d60202d910aaba8c9e1cd1e15635e

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4b.

I am very happy to see that there are new updates.
I'm going to try now and hope my rig can run mining again


update:

holaaaaa...
after 10 days left my RIG can't run with PM,
now with new update driver and PM its running without problem Allocating buffers failed with: clCreateBuffer (-61).

now run:
https://i.postimg.cc/VNxPgpZ0/Screenshot-3.jpg

thank you @PhoenixMiner

[Cryptomining2003]

how can I use the new kernel? does it work automatically or does it need to set a parameter?
Im at 20.30 in linux with amd5700

[batsonxl]

@ Mr. Phoenix thanks for update.
what about stpraps for polaris cards?

[zeezoo]

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.

Is there any way to patch drivers version higher that 20.5.1 for BIOS modified cards? I had no luck with PhoenixMiner detecting any GPUs for mining with 20.5.1 and as far as I know you can't patch newer drivers with AMD-ATI-Pixel-Clock-Patcher.

Regards,
zeezoo

[Miner_Storm]

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

https://mega.nz/folder/OJ9BCYaD#osOU-PywjweHqQkux8rpbQ  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):

Code:

   File: PhoenixMiner_5.4b_Windows.zip
    ===================================
   SHA-1: 6a42d27493062ddcef6f2a12a348c6d4b68f65ce
 SHA-256: 53a5210e004ffa3fae3c3378004d1d369c21227e5e800f849a6c8e354fd7ca2c
 SHA-512: 6404648e6a6e5e3ef624ad6038351eb712ba3810070b4307557f42394e25e18d5d6e7760e472d3b17e286e23139ab573d444a0c900ac1c018374f8d25d3c6852

    File: PhoenixMiner_5.4b_Linux.tar.gz
    ====================================
   SHA-1: 434d3a9922a7ddc3f65d341cc7630032995e1e23
 SHA-256: a5f612dd151d06b9a1144a911d2ca1b351bb385dfc73fbd44888af24a2cf1122
 SHA-512: 98c4c09fe4bc144412a87eef506514d8cca9c8db9ba4acb95ec71ea7100969cc2411224175454d456b89184cc451a0bbaf5d60202d910aaba8c9e1cd1e15635e

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4b.

mr. Phoenix Hi!
please tell me what's wrong with miner? Or am I doing something wrong.
I have Asus 1070ti strix 8GB. in afterburner pov. lim 85, core +50, memory +600, in the bat file, strap 1 - claymore of stable 34.5 for several years. but a phoenix with the same settings 32 max !!! And loads gpu so that the pages in the browser are not scrolled !!! Strap 2 artifacts before power reboot, strap 3 does not start at all. What's wrong with it???
That`s bat file:PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal ........................................1070TI -proto 3 -epsw x -straps 1 -log 0 -retrydelay 1 -Rmode 1 -coin eth -Wdog 1 -stales 1 -mport 0 -etha 0
pause
I really hope for your help! Thank you very much!!!

[Lukke]

Hello! Does Phoenixminer support the "zombie mode" which is implemented in another miners (like lolminer) so we will be able to mine with reduced speed even in early January 2021? I just upgraded from 5.1 to 5.3b using Linux (Ethos) and speed reduced from 28.5 MH to 26.5 MH per one 570RX 4GB card... Any solution for this how? Thanks a lot for your help!!

[trinityfl]

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

The new features in this release are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4b.

ETH under Linux (OpenCL 20.30) R9 390 8Gb (-61)
?

[ManuBBXX]

does PhoenixMiner 5.4b fixes issues with the new Nvidia 460.79 driver ?
Cause I mine too on my gaming rig and would like to update for cyberpunk

[restless]

is there a fix for

Allocating buffers failed with: clCreateBuffer (-61).

 ?

[Semtex72]

does PhoenixMiner 5.4b fixes issues with the new Nvidia 460.79 driver ?
Cause I mine too on my gaming rig and would like to update for cyberpunk

Apparanty soemthing to do with the location of some dll's. Nicehash has more on it

[PhoenixMiner]

how can I use the new kernel? does it work automatically or does it need to set a parameter?
Im at 20.30 in linux with amd5700

   It activates automatically when needed.

@ Mr. Phoenix thanks for update.
what about stpraps for polaris cards?

   Working on it but probably won't be ready before January.

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.

Is there any way to patch drivers version higher that 20.5.1 for BIOS modified cards? I had no luck with PhoenixMiner detecting any GPUs for mining with 20.5.1 and as far as I know you can't patch newer drivers with AMD-ATI-Pixel-Clock-Patcher.

Regards,
zeezoo

    Just use the latest pixelpatcher 1.4.8 from here:  https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

mr. Phoenix Hi!
please tell me what's wrong with miner? Or am I doing something wrong.
I have Asus 1070ti strix 8GB. in afterburner pov. lim 85, core +50, memory +600, in the bat file, strap 1 - claymore of stable 34.5 for several years. but a phoenix with the same settings 32 max !!! And loads gpu so that the pages in the browser are not scrolled !!! Strap 2 artifacts before power reboot, strap 3 does not start at all. What's wrong with it???
That`s bat file:PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal ........................................1070TI -proto 3 -epsw x -straps 1 -log 0 -retrydelay 1 -Rmode 1 -coin eth -Wdog 1 -stales 1 -mport 0 -etha 0
pause
I really hope for your help! Thank you very much!!!

   You may try to find the best possible settings between strap 1 and strap 2. Here is what to do:

• Enable the log by temporarily removing -log 0 from your bat file
• Start the miner and wait for a minute or so then stop it. Look in the log file for a line similar to this one: "GPU1: set VRAM strap 1 (-vmt1 25 -vmt2 20 -vmt3 0 -vmr 33)". Note that in your case the values in -vmt1, -vmt2, -vmt3, and -vmr will probably be different. Write them down.
• Remove -strap 1 from the bat file and replace it with the values that you wrote down from the previous step: -vmt1 25 -vmt2 20 -vmt3 0 -vmr 33 Again, the values in your case will probably be different, use them, not these example values here.
• Start the miner again and wait for a several minutes to see the speed - should be the same as with -straps 1 if you set everything properly.
• From here on you can start experimenting by stopping the miner, increasing some of the values by little (for example, replace -vmt1 25 with -vmt1 26), and then start the miner and check if it is stable and what is the speed.
  

Finally, if you want to use the computer, while mining, and without slowdowns, you must decrease the mining intensity by setting -mi 8 or even lower value (-mi 0 should allow uninterrupted work on your PC but will lower the mining speed). Do not decrease -mi while adjusting the memory timing values as shown in the previous steps - do it once you are satisfied with the other settings.

Hello! Does Phoenixminer support the "zombie mode" which is implemented in another miners (like lolminer) so we will be able to mine with reduced speed even in early January 2021? I just upgraded from 5.1 to 5.3b using Linux (Ethos) and speed reduced from 28.5 MH to 26.5 MH per one 570RX 4GB card... Any solution for this how? Thanks a lot for your help!!

  Yes, we support something similar but the speed will start decreasing with each new epoch after 381-382. It is not a long-term solution, and there is no permanent workaround.

does PhoenixMiner 5.4b fixes issues with the new Nvidia 460.79 driver ?
Cause I mine too on my gaming rig and would like to update for cyberpunk

   We will see if it is possible to fix the issue in 5.4c, which should also bring official/initial support for Nvidia RTX 30x0 series cards.

ETH under Linux (OpenCL 20.30) R9 390 8Gb (-61)
?

   We are aware about the problem with Hawaii cards and we working on modified kernels. Hopefully they will be ready in a week or so.

is there a fix for

Allocating buffers failed with: clCreateBuffer (-61).

 ?

    We only see this error with Hawaii cards (R9 290/390). If you have other (newer) cards and still see the problem, please let us know the PhoenixMiner version, the AMD driver version, and the exact type of the cards. Also at least part of the log file will be helpful, including the error and one-two screens before that.

[dastardlyman12]

many thanks mister phoenix
put latest phoenix (5.4) and amd driver 20.5.1 on the two radeon VII rigs
hashrate restored! back up to 83 meghash from 80.
gt value has changed but all good

[restless]

is there a fix for

Allocating buffers failed with: clCreateBuffer (-61).

 ?

   We only see this error with Hawaii cards (R9 290/390). If you have other (newer) cards and still see the problem, please let us know the PhoenixMiner version, the AMD driver version, and the exact type of the cards. Also at least part of the log file will be helpful, including the error and one-two screens before that.

HiveOS  latest build 181 10-12-2020, AMD drivers 19.50
Rig of 4 Radeons, first one 580 8GB (with display interface), others 470 4GB

command line - used "even"
-daglim 1 -eres 0 -rvram -1 -rmode 0

It started on 2nd december (epoch 379?) and here in the forum were other complaints from Polaris users.
log:

Code:

2020.12.12:15:43:47.097: main Phoenix Miner 5.3b Linux/gcc - Release build
2020.12.12:15:43:47.097: main Cmd line: -epool ru-eth.hiveon.net:4444 -ewal 0xe9.RX470 -epsw x -coin eth -cclock 1040 -cvddc 970 -mclock 1950 -tt 74 -daglim 0 -rmode 0 -wd 0 -eres 0 -rvram -1
2020.12.12:15:43:47.100: main Unable to enum CUDA GPUs: no CUDA-capable device is detected
2020.12.12:15:43:47.279: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.12.12:15:43:47.279: main OpenCL platform: OpenCL 2.1 AMD-APP (3004.6)
2020.12.12:15:43:47.279: main Available GPUs for mining:
2020.12.12:15:43:47.279: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 1.2, 8 GB VRAM, 36 CUs
2020.12.12:15:43:47.279: main GPU2: AMD Radeon (TM) RX 470 Graphics (pcie 2), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.279: main GPU3: AMD Radeon (TM) RX 470 Graphics (pcie 4), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.279: main GPU4: Radeon RX 570 Series (pcie 5), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.280: main AMD sysfs monitor initialized
2020.12.12:15:43:47.280: main Eth: Loading pools from epools.txt
2020.12.12:15:43:47.280: main Eth: the pool list contains 5 pools (1 from command-line)
2020.12.12:15:43:47.280: main Eth: primary pool: ru-eth.hiveon.net:4444
2020.12.12:15:43:47.280: main Starting GPU mining
2020.12.12:15:43:47.280: main GPU1: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU2: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU3: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU4: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.330: hwmc GPU1: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU2: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU3: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU4: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.381: main Eth: Connecting to ethash pool ru-eth.hiveon.net:4444 (proto: EthProxy)
2020.12.12:15:43:47.382: main GPU1: 49C 21% 37W, GPU2: 27C 20% 19W, GPU3: 25C 24% 13W, GPU4: 29C 34% 36W
GPUs power: 105.6 W
2020.12.12:15:43:47.482: eths Eth: Connected to ethash pool ru-eth.hiveon.net:4444 (185.22.235.97)
2020.12.12:15:43:47.482: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0xe9.RX470","x"]}

2020.12.12:15:43:47.553: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2020.12.12:15:43:47.553: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
...

2020.12.12:15:43:47.629: GPU1 GPU1: Starting up... (0)
2020.12.12:15:43:47.630: GPU1 GPU1: Generating ethash light cache for epoch #381
2020.12.12:15:43:47.630: GPU2 GPU2: Starting up... (0)
2020.12.12:15:43:47.630: GPU3 GPU3: Starting up... (0)
2020.12.12:15:43:47.630: GPU4 GPU4: Starting up... (0)
2020.12.12:15:43:49.078: eths Eth: Received:
2020.12.12:15:43:49.078: eths Eth: New job #ae9927c8 from  diff: 5000MH
2020.12.12:15:43:51.029: GPU1 Light cache generated in 3.4 s (18.7 MB/s)
2020.12.12:15:43:51.164: GPU1 GPU1: Free VRAM: 7.960 GB; used: 0.019 GB
2020.12.12:15:43:51.172: GPU1 GPU1: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.173: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.173: GPU1 Fatal error detected. Restarting.
2020.12.12:15:43:51.300: GPU2 GPU2: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.308: GPU2 GPU2: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.308: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.435: GPU3 GPU3: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.438: GPU3 GPU3: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.439: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.582: GPU4 GPU4: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.582: GPU4 GPU4: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.582: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61).