PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[FP91G]

Please help me out. I am stuck with 36MH for 1080ti on phoenixminer 5.5c

Using strap -2 or -3 dont do anything. Without the pill is it the MAX MH i can squueze from this gpu ?

+500 mem + 0 core %90 PT

Not without the ETHlargement You need the ETHlargement Pill to reach 50+mh on gtx1080ti, you should do research on that using Google and drop a little thank you later later

50+mh   hahaha
Even if you set the turn limit to the maximum value, you will not get such a result. This problem is associated with the growth of the DAG file and the decrease in the hash rate on nvidia video cards.
If you mine Ethereum Classic, where the dag file is less than 3GB, then such a hash rate is possible.

[1714166066]

1714166066

[1714166066]

1714166066

[1714166066]

1714166066

[kazaf]

CUDA error in Cuba Program.cu:388 : out of memory (2)
GPU1: CUDA memory: 4.00 GB total, 3.25 GB free
GPU1 initMiner error: out of memory
Fatal error detected. Restarting.

Any solution for me,please help.

[edk3742]

I accidentally downloaded the malware 5.5d hotfix file from the spam user... any advice or is this really bad and all my info is compromised?

[UserU]

I accidentally downloaded the malware 5.5d hotfix file from the spam user... any advice or is this really bad and all my info is compromised?

Bad, really bad. If you discovered it shortly after downloading the malware, avoid logging on to any sites or doing anything. Chances are that thing is logging all your private info or downloading more malware.

Make sure you disconnect your PC to prevent the malware from spreading. Run your antivirus scans and remove every trace of it. And change your passwords after doing so.

[clt]

Hi,

Single RTX 2080 Super on a friends computer of mine. I'm not able to -mclock or -cclock properly. Everytime it throws
'GPU 1: Unable to set memory clock delta to 500 MHz. - error -137'.  

However other commands works fine. I'm able to oc mem and gpu clock on msi after burner though. If I do that, card mines properly at 44 MH. But this is not the case for phoenix miner. Any resolutions?

[oblivionxt]

For anyone using RX 6000 (RX 6800 in my case) cards on Windows 10 experiencing driver, miner, or OS instability:

Lowering mining intensity (-mi) to a lower value, where you just start to lose hashrate, can bring your stability to ~100%

In my case -mi 4 completely ceased driver timeouts and crashes...for the price of .3 MH/s when no other applications are open.  My system remains stable no matter what other loads I place on the GPU.

My average hashrate is up...since I never have timeouts or crashes now!

[Blockpusher]

I accidentally downloaded the malware 5.5d hotfix file from the spam user... any advice or is this really bad and all my info is compromised?

I hope the infected system is not your personal computer. If it just a mining ring, it's not a big problem.
Otherwise, i recommand to format and reinstall Windows. and like says UserU, change all passwords!

Always choose the download link on the first topic page.

 

[coinhunter142]

For anyone using RX 6000 (RX 6800 in my case) cards on Windows 10 experiencing driver, miner, or OS instability:

Lowering mining intensity (-mi) to a lower value, where you just start to lose hashrate, can bring your stability to ~100%

In my case -mi 4 completely ceased driver timeouts and crashes...for the price of .3 MH/s when no other applications are open.  My system remains stable no matter what other loads I place on the GPU.

My average hashrate is up...since I never have timeouts or crashes now!

Thank you, I will try this. I have a RX6900XT and I switched to teamredminer because of said problems.

[dumbcane]

Again there was another DAG change and 3 out of 10 miners wen't offline.
Is this a known problem ?

Ubuntu 18.04.4 with AMD 20.20 drivers.

[earlybird36]

Again there was another DAG change and 3 out of 10 miners wen't offline.
Is this a known problem ?

Ubuntu 18.04.4 with AMD 20.20 drivers.

use -lidag to slow down the dag creation process and prevent crashes.

[Alex55466452]

Are you guys using PhoenixMiner or MSI afterburner for overclocking RTX3060 TI, RTX3070 and RTX3080?

Kind Regards

[jetwalsh]

Are you guys using PhoenixMiner or MSI afterburner for overclocking RTX3060 TI, RTX3070 and RTX3080?

Kind Regards

I use MSI Afterburner with my 1070s and 3080s. Overclocking through the Phoenix miner seems to be broken.

[kenron]

anyone who can help with phoenix issue? miner worked fine until win10 update, then i get this error"2021.02.18:19:53:15.405: GPU1 GPU1: clSetKernelArg (-48)
2021.02.18:19:53:15.405: wdog Fatal error detected. Restarting. " i then has to put in -clkernel 0 to get them to work again, but then i cant tune the cards and a few cards gets lower hashrate

[KLUC]

Hi, new "miner" here.

I'm mining on 1x3060Ti (ZOTAC Twin Edge OC) for few days. Card is stable running at 61,5MH/s at PW 65%, CC -502, MC +1300 using MSI AfterBurner. But twice (once on start, once after 3 days of mining) happened to me that "CUDA error in CudaProgram.cu:465 : unknown error (999)" appeared (enclosed picture), miner restart itself but the clock reset to stock which mean lower hashrate with higher W. Any solution for this?

Thanks

https://i.imgur.com/ALVr3fl.png

[G00DFe77a]

Starting today using 5.5c and AMD Radeon V56, started to get clSetKernelArg (-48) on startup, before today it was fine. The only way was to use -clKernel 0 for it to work. Is there anything I can do to use the optimized clkernel 1 instead of the generic -clKernel 0 instead?

[einsteinium]

Einsteinium team is looking to utilize PhoenixMiner  for mining MIL coin which is about to be released.

Who should we contact about it?

We also sent direct message to the admins, please get in touch.

Thank you,

EMC2 dev team

[Akyboy]

Hi Guys,

Im i able to use Phoenix to mine only on AMD cards and different miner for NVIDIA cards - this is all one rig btw?

Thanks

[toynn]

Again there was another DAG change and 3 out of 10 miners wen't offline.
Is this a known problem ?

Ubuntu 18.04.4 with AMD 20.20 drivers.

use -lidag to slow down the dag creation process and prevent crashes.

I agree this is a good setting to try. I've used -lidag 3 and it does seem to help with the crashes during dag changes and also helped with crashing at startup I was having on an 11 gpu rig. But I still get crashes on some rigs during the dag change even with the lidag setting.

[Toninho]

Hi, after 12 hours the miner starts giving this error -»

Unknown OpenCL driver version! Hashrate and stale shares may suffer

2021.02.12:11:15:58.688: main Phoenix Miner 5.2e Windows/msvc - Release build
2021.02.12:11:15:58.688: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal xxxxxxxxxxxxxxxxxxxxxx.480x480 -mt 1 -amd -coin etc
2021.02.12:11:16:00.688: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2021.02.12:11:16:00.688: main OpenCL platform: OpenCL 2.1 AMD-APP (3075.13)
2021.02.12:11:16:00.708: main Available GPUs for mining:
2021.02.12:11:16:00.708: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.708: main GPU2: Radeon (TM) RX 480 Graphics (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.709: main ADL library initialized
2021.02.12:11:16:02.762: main Eth: Loading pools from epools.txt
2021.02.12:11:16:02.762: main Eth: the pool list contains 8 pools (2 from command-line)
2021.02.12:11:16:02.762: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2021.02.12:11:16:02.762: main Starting GPU mining
2021.02.12:11:16:02.762: main Matched GPU1 to ADL adapter index 8 (method 1)
2021.02.12:11:16:02.801: main GPU1: AMD driver 20.10.35.02

Is there a solution?

You are mining eth but you written coin etc, delete coin or write eth.

The problem continues -» Unknown OpenCL driver version! Hashrate and stale shares may suffer   
Every time it happens i have to install the drives again.

[bareck]

Anyone have this error? Any idea how to fix this?
Tried DDU driver and reinstall NVIDIA driver, no luck.

Code:

2021.02.19:01:27:40.229: main Unable to enum CUDA GPUs: unknown error
2021.02.19:01:27:40.455: main No OpenCL platforms found
2021.02.19:01:27:40.455: main No avaiable GPUs for mining. Please check your drivers and/or hardware.
2021.02.19:01:27:40.455: main Exit code: 8