DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
August 28, 2013, 04:24:03 PM |
|
no, temperature was ~62°C, now it is ~59°C
Doesn't sound like something that would make a difference. Oh well, as long as it works I guess.
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
SgtSpike
Legendary
Offline
Activity: 1400
Merit: 1005
|
|
August 29, 2013, 12:24:57 AM |
|
its really strange every ~1-2 hours BFL LS is stopping and 2013.08.27 [15:02] Work rejected. Server says: Stale or alien proof of work 2013.08.27 [15:27] Work rejected. Server says: Stale proof of work 2013.08.27 [15:30] Work rejected. Server says: Stale or alien proof of work 2013.08.27 [15:30] Work rejected. Server says: Stale proof of work 2013.08.27 [15:36] BitFORCE (ttyUSB7) ERROR: Disconnected while working 2013.08.27 [15:36] Cannot write to ttyUSB7: device disconnected (output stream gone) 2013.08.27 [15:36] Cannot write to ttyUSB7: device disconnected (output stream gone) 2013.08.27 [15:36] Probe of port ttyUSB7 failed: timeout it stops and is only recovered if I manually probe all ports for external devices (after a few minutes) 2013.08.27 [15:40] Device detected on ttyUSB7: BitFORCE SC 1.0 or I restart (stop and make a new instance) BitMinter client BE and Jalapeno are working further is there any way to automatically stop and restart BitMinter client every ~1-2 hours? TIA A friend of mine is getting the same error about 3 times a day with the latest mining client. He only runs two SC Singles.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
August 30, 2013, 10:24:42 AM |
|
A friend of mine is getting the same error about 3 times a day with the latest mining client. He only runs two SC Singles.
The auto rescan isn't finding them I guess because they don't work properly for a while after they come back. It sees a new COM port, probes it, determines there is no mining device. After that it doesn't try again, but the single starts working again a couple minutes later. At least that is what this sounds like. I think I'll need to put in a new option for the auto rescan to keep retrying all ports not just new ones. It will produce a lot of errors on computers with COM ports that are not for mining. But it seems useful in this case.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4102
Merit: 7764
'The right to privacy matters'
|
|
August 30, 2013, 09:28:24 PM |
|
A friend of mine is getting the same error about 3 times a day with the latest mining client. He only runs two SC Singles.
The auto rescan isn't finding them I guess because they don't work properly for a while after they come back. It sees a new COM port, probes it, determines there is no mining device. After that it doesn't try again, but the single starts working again a couple minutes later. At least that is what this sounds like. I think I'll need to put in a new option for the auto rescan to keep retrying all ports not just new ones. It will produce a lot of errors on computers with COM ports that are not for mining. But it seems useful in this case. doc I got 3 blades today I only use java and bitminter will java probe an ethernet jack I know it looks at usb ports and will find asic miner usb sticks pretty well or do I need to use a different client? I have been reading bfgminer trying to figure out how to setup with bitminter pool.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
August 30, 2013, 11:03:55 PM |
|
doc I got 3 blades today I only use java and bitminter will java probe an ethernet jack I know it looks at usb ports and will find asic miner usb sticks pretty well or do I need to use a different client?
No, you have to use the built-in mining software. I don't have a blade myself, but tried to write some instructions here, based on info from blade users: https://bitcointalk.org/index.php?topic=27062.msg3046129#msg3046129Maybe in the future BitMinter client can work as a stratum proxy, but not yet.
|
|
|
|
jason60069
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 02, 2013, 01:15:07 AM |
|
Hi, I'm trying to make my usb asicminer block erupter work with the bitminter client. I have the silabs drivers installed, and my computer can recognize the miner. However, the bitminter client returns the error "Probe of port COM3 failed: timeout". Any ideas on what's wrong?
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
September 02, 2013, 06:12:42 AM |
|
Hi, I'm trying to make my usb asicminer block erupter work with the bitminter client. I have the silabs drivers installed, and my computer can recognize the miner. However, the bitminter client returns the error "Probe of port COM3 failed: timeout". Any ideas on what's wrong?
Is COM3 where the block erupter stick is? If you go "devices" -> "probe all ports" in the menu without the block erupter plugged in, there is no message about COM3 ? Is it plugged directly into the computer? Or do you have a USB hub, perhaps with several block erupters connected? I get the impression that most often the problem is that the block erupter doesn't get enough power. Often because powered USB hubs ship with weak power supplies.
|
|
|
|
jason60069
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 02, 2013, 10:40:00 PM |
|
It is plugged directly into the computer.
Also, when the block erupter is not plugged in, and I probe all ports, I just get the message "Probe failed: No serial ports found."
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
September 02, 2013, 10:47:24 PM |
|
Hi, I'm trying to make my usb asicminer block erupter work with the bitminter client. I have the silabs drivers installed, and my computer can recognize the miner. However, the bitminter client returns the error "Probe of port COM3 failed: timeout". Any ideas on what's wrong?
CTL-ALT -Delete bitminter as it erases any hangups. Uninstall drivers reboot reinstall drivers plug usb in port restart bitminter few times as well as unplug and replug usb. That you can do first too. Mostly underpowered ports....
|
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
September 04, 2013, 10:11:01 PM |
|
Actually, here's what I get now.
Do you have another computer you could try it on?
|
|
|
|
jason60069
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 04, 2013, 10:16:02 PM |
|
Ok, I'll try it now.
|
|
|
|
jason60069
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 04, 2013, 10:41:20 PM |
|
On a different computer, I still got the same errors...
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
September 05, 2013, 06:09:03 AM |
|
On a different computer, I still got the same errors...
Can you try bfgminer? There is a link at the frontpage of https://bitminter.com to get it and you can run it from the command line like so: bfgminer -o stratum+tcp://mint.bitminter.com:3333 -u user_worker -p password At this point I would think the erupter stick is broken, but there has been 1 user reporting that bfgminer works for him and not BitMinter client.
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
September 05, 2013, 12:35:29 PM |
|
On a different computer, I still got the same errors...
Can you try bfgminer? There is a link at the frontpage of https://bitminter.com to get it and you can run it from the command line like so: bfgminer -o stratum+tcp://mint.bitminter.com:3333 -u user_worker -p password At this point I would think the erupter stick is broken, but there has been 1 user reporting that bfgminer works for him and not BitMinter client. IMO-Something to do with the MB controllers etc. with Bitminter.
|
|
|
|
ThatFatGuy
Newbie
Offline
Activity: 38
Merit: 0
|
|
September 05, 2013, 01:02:45 PM |
|
Hi, I started on the .333 usb sticks, and BitMinter was the only mining program that would work with them on XP, despite successful installs of the other products.
First: each .333 Ghs stick takes 0.5 amps to run. That means you need a powered hub to run them. I use the DLink powered hub which has 7 slots and 6 amps total, which means one usb slot per power hub has to stay open.
So my first suggestion to see if it can run at all is to use a powered hub and see if it clears up the mining software issues, because if there is not enough juice to activate hardware, software can malfunction.
Second: start with only one in the hub.
Third: expect to have to install at least two different sets of drivers until the item is found (But given it doesn't see the stick in the usb, I would say it is underpowered). I have found success with Silicon Graphics USBXpress_SDK.exe which automatically installs the drivers for you I think I remember.
These were far more successful than the CP210x_VCP_Windows drivers I think.
Hope this helps, and come back as you make progress. Thanks. Drunken Afficianado
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
September 05, 2013, 01:29:16 PM |
|
Hi, I started on the .333 usb sticks, and BitMinter was the only mining program that would work with them on XP, despite successful installs of the other products.
First: each .333 Ghs stick takes 0.5 amps to run. That means you need a powered hub to run them. I use the DLink powered hub which has 7 slots and 6 amps total, which means one usb slot per power hub has to stay open.
So my first suggestion to see if it can run at all is to use a powered hub and see if it clears up the mining software issues, because if there is not enough juice to activate hardware, software can malfunction.
Second: start with only one in the hub.
Third: expect to have to install at least two different sets of drivers until the item is found (But given it doesn't see the stick in the usb, I would say it is underpowered). I have found success with Silicon Graphics USBXpress_SDK.exe which automatically installs the drivers for you I think I remember.
These were far more successful than the CP210x_VCP_Windows drivers I think.
Hope this helps, and come back as you make progress. Thanks. Drunken Afficianado
Thanks for the info on optional drivers. That should do it. I just heard yesterday a guy measured the USB's when under heavy hashing and they run up to 1A!
|
|
|
|
a2offrb
Full Member
Offline
Activity: 453
Merit: 101
RISE WITH RAYS FOR THE FUTURE
|
|
September 08, 2013, 12:48:13 PM |
|
I have tried to get client work with BFL LS, downloaded this virtual com port software but dont know what drivers i should use for BFL device, BitMinter client doesnt found BFL device. Currently using CGMiner with WinUsb drivers.
|
|
|
|
DrHaribo (OP)
Legendary
Offline
Activity: 2730
Merit: 1034
Needs more jiggawatts
|
|
September 08, 2013, 06:49:36 PM |
|
I have tried to get client work with BFL LS, downloaded this virtual com port software but dont know what drivers i should use for BFL device, BitMinter client doesnt found BFL device. Currently using CGMiner with WinUsb drivers.
This driver is used by all mining clients except CGMiner for BFL units: http://www.ftdichip.com/Drivers/VCP.htmI don't know if you need to uninstall or disable the winusb stuff for the normal FTDI driver to work. Anyone know?
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1049
|
|
September 09, 2013, 10:36:32 AM Last edit: September 09, 2013, 03:16:17 PM by ewibit |
|
upgraded to Ubuntu 13.04 and same problem again with BFL LS that it stops after ~1-2 hours and not starting automatically again (exept for starting BitMinter client manually new) 2013.09.09 [12:52] Work rejected. Server says: Stale proof of work 2013.09.09 [12:54] BitFORCE (ttyUSB0) ERROR: Unexpected response without command: BitForce SHA256 SC 1.0 2013.09.09 [12:54] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0 2013.09.09 [12:54] Probe of port /dev/ttyUSB0 failed: timeout 2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Unexpected response without command: BitForce SHA256 SC 1.0 2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0 2013.09.09 [17:11] Probe of port /dev/ttyUSB0 failed: timeout 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work results poll command: BitForce SHA256 SC 1.0 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: INPROCESS:1 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: COUNT:16 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE58E1931679C,5,1,6BC1B0FE 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work queue flush command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5981931679C,2,3,1B251CAF,28F291D5,B0A3BE86 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59D1931679C,0,2,66804588,851B4256 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59C1931679C,7,0 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5A21931679C,4,0 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5AC1931679C,3,1,E9C671B0 2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0 2013.09.09 [17:13] Probe of port /dev/ttyUSB0 failed: timeout
|
|
|
|
|