nik-qz
|
|
September 23, 2021, 09:31:25 PM |
|
--lhr-tune 4 And how much does the usual 3080 hash give out in this mode and how many watts does it consume?
|
|
|
|
lowbander801
Jr. Member
Offline
Activity: 96
Merit: 1
|
|
September 24, 2021, 07:15:49 AM |
|
after running T-rex latest version for nearly 24hours...I noticed a little more stability on the 3060 LHR and also less mining hopping on the 3070ti. the 3070ti is running constantly on 56-57mhs...that is really so close to the Non LHR 3070 that I have but with nearly 50more watts thats so good. also the miner started with 4 but later in autotuned to LHR3 so and running stable now.
NBminer as it was the first miner that increased the hash rate with the LHR cards, need more power for the same hash rate. so some more testing with T-rex
|
|
|
|
trexminer (OP)
Member
Offline
Activity: 283
Merit: 63
|
|
September 25, 2021, 06:20:33 AM |
|
T-Rex 0.23.1NOTE: this version includes a couple of breaking changes: GPU ordering change and telnet API removal. Make sure you remove your GPU-order specific OC settings from *.bat/*.sh files before updating. Auto-updates won't be turned on for this version for the same reason. Users of HiveOS and other mining operating systems that force PCI bus GPU order are unaffected by the GPU-order change. * New WebUI and API (refer to https://github.com/trexminer/T-Rex/wiki/WebUI on how to set it up): 1. Ability to generate config files 2. Improved API security: optional password and https 3. GPU/memory clock and share difficulty reporting 4. Log viewer 5. Ability to pause GPUs If you don't like the new WebUI and would prefer to use the old one for any reason, download "webui.zip" from https://github.com/trexminer/T-Rex/releases/download/0.23.1/webui.zip, put it next to t-rex executable, and restart the miner. * Order GPUs by PCI bus id. You may need to change the settings that relied on GPU order. * Remove telnet API * Multiple bug fixes
|
|
|
|
acemang
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 25, 2021, 07:53:42 PM |
|
after running T-rex latest version for nearly 24hours...I noticed a little more stability on the 3060 LHR and also less mining hopping on the 3070ti. the 3070ti is running constantly on 56-57mhs...that is really so close to the Non LHR 3070 that I have but with nearly 50more watts thats so good. also the miner started with 4 but later in autotuned to LHR3 so and running stable now.
NBminer as it was the first miner that increased the hash rate with the LHR cards, need more power for the same hash rate. so some more testing with T-rex
I've only 54-56Mhs in my Asus 3070 Ti Tuf. What card do you have and what values? in windows or hive os? I've that in windows using also T-rex but I only get LHR 1 to work.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3164
Merit: 1003
|
|
September 25, 2021, 08:24:10 PM Last edit: September 29, 2021, 10:37:12 AM by tbearhere |
|
T-Rex 0.23.1NOTE: this version includes a couple of breaking changes: GPU ordering change and telnet API removal. Make sure you remove your GPU-order specific OC settings from *.bat/*.sh files before updating. Auto-updates won't be turned on for this version for the same reason. Users of HiveOS and other mining operating systems that force PCI bus GPU order are unaffected by the GPU-order change. * New WebUI and API (refer to https://github.com/trexminer/T-Rex/wiki/WebUI on how to set it up): 1. Ability to generate config files 2. Improved API security: optional password and https 3. GPU/memory clock and share difficulty reporting 4. Log viewer 5. Ability to pause GPUs If you don't like the new WebUI and would prefer to use the old one for any reason, download "webui.zip" from https://github.com/trexminer/T-Rex/releases/download/0.23.1/webui.zip, put it next to t-rex executable, and restart the miner. * Order GPUs by PCI bus id. You may need to change the settings that relied on GPU order. * Remove telnet API * Multiple bug fixes Are you going to keep "GPU ordering change" for all builds from now on I hope?
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 26, 2021, 08:46:16 PM Last edit: September 26, 2021, 10:45:44 PM by Anton Ivar |
|
To pause certain GPUs: doesn't work http://127.0.0.1:4067/control?pause=true:2 error "API readonly mode is activated" or error "unauthorized request"
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 27, 2021, 12:41:26 AM |
|
Then use "api-read-only" : false, in your .bat. It's read only by default. You also have to use an api key.
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 27, 2021, 07:35:36 PM Last edit: September 27, 2021, 08:05:23 PM by Anton Ivar |
|
@echo off :start1 t-rex -a ethash -o stratum2+tcp://daggerhashimoto.EU-North.nicehash.com:3353 -u 3J1223asdasdfsdfdfdsfsYgLLq.rig0 -p x -i 22 --gpu-report-interval 600 --temperature-color 55,65 --dag-build-mode 2 --validate-shares --coin "eth" --ab-indexing --kernel 4 --cpu-priority 2 --api-key 2311FdsfAAdsfKDfl112ejlsdfkldsfsdr4923873lj3212m,dsfSFjnjdfr00201 {? --api-read-only false ?} --fan 100,100,100,100,100,100,100 --pl 73,0,80,77,0,100,90 --lock-cv 731,0,731,743,0,0,718 --lock-cclock 1260,0,1155,1320,0,1305,1300 --mclock 1200,1140,991,1110,0,1634,1300 -l C:\Users\me\Desktop\log.txt goto start --api-read-only false doesn't start . Could you help me what sintaksis exactly i have to use ? i have only parse error In http://127.0.0.1:4067/trex i try to enable api_read_only default: false Allow only read operations for API calls. Used by default in case of "api-key" wasn't set. and see " Current miner settings successfully changed. Though config wasn't saved to HDD cause you didn't specify config path " https://hkar.ru/14HgN
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 27, 2021, 08:02:33 PM |
|
@echo off :start1 t-rex -a ethash -o stratum2+tcp://daggerhashimoto.EU-North.nicehash.com:3353 -u 3J1223asdasdfsdfdfdsfsYgLLq.rig0 -p x -i 22 --gpu-report-interval 600 --temperature-color 55,65 --dag-build-mode 2 --validate-shares --coin "eth" --ab-indexing --kernel 4 --cpu-priority 2 --api-key 2311FdsfAAdsfKDfl112ejlsdfkldsfsdr4923873lj3212m,dsfSFjnjdfr00201 {? --api-read-only false ?} --fan 100,100,100,100,100,100,100 --pl 73,0,80,77,0,100,90 --lock-cv 731,0,731,743,0,0,718 --lock-cclock 1260,0,1155,1320,0,1305,1300 --mclock 1200,1140,991,1110,0,1634,1300 -l C:\Users\me\Desktop\log.txt goto start --api-read-only false doesn't start . Could you help me what sintaksis exactly i have to use ? i have only parse error https://hkar.ru/14HgNFirst, are these 10 series cards or 20/30 series cards? Second, that doesn't look like a valid ETH wallet address Third, if you have a mix of 10 series and 20/30 series cards in the rig, then you've got some settings missing. Fourth, you don't use --lock-vc with --lock-cclock, you should let --lock-cclock manage the cv for you, as that's how it manages the clock speed
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 27, 2021, 08:07:42 PM Last edit: September 27, 2021, 08:38:05 PM by Anton Ivar |
|
i use mix of multiple 3080 and 3090 i just want to stop function one of GPU / oh some addresses was changed like this http://127.0.0.1:4067/control?pause=true:2 when i try to stop i have error "API readonly mode is activated" , Edit config error (API readonly mode is activated) or error "unauthorized request"
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 27, 2021, 08:18:33 PM |
|
i use mix of multiple 3080 and 3090 i just want to stop function one of GPU lile this / oh some addresses was changed http://127.0.0.1:4067/control?pause=true:2 when i try to stop i have error "API readonly mode is activated" , Edit config error (API readonly mode is activated) or error "unauthorized request" Actually, use this as a starting point. t-rex.exe -a ethash -o stratum2+tcp://daggerhashimoto.EU-North.nicehash.com:3353 -u 3J1223asdasdfsdfdfdsfsYgLLq.rig0 -p x --gpu-report-interval 30 --temperature-color 55,65 --dag-build-mode 2 --coin eth --api-key 2311FdsfAAdsfKDfl112ejlsdfkldsfsdr4923873lj3212m,dsfSFjnjdfr00201 --api-read-only false --api-bind-http 127.0.0.1:4067 --fan 100 --lock-cclock 1100,1100,1100,1100,1100,1100,1100 --mclock 500,500,500,500,500,500,500 -l C:\Users\me\Desktop\log.txt
You'll need to alter your core clocks and memory offsets, but this should get you rolling as long as you have a valid wallet address. There's clearly more reading you need to do so you understand what all the settings do. I'd strongly suggest you join the t-rex Discord server as well. Help is more readily available there than on a forum which limits time between posts.
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 27, 2021, 08:35:40 PM |
|
with --api-read-only false
unfortunately miner does not start with this option
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 27, 2021, 11:13:07 PM Last edit: September 27, 2021, 11:25:48 PM by Grendahl |
|
with --api-read-only false
unfortunately miner does not start with this option
I don't use a .bat file to start, so the syntax may be a bit different for that option. Try --api-read-only 0 instead. Or, use to get the syntax for that flag.
|
|
|
|
trexminer (OP)
Member
Offline
Activity: 283
Merit: 63
|
|
September 28, 2021, 02:45:01 AM |
|
with --api-read-only false
unfortunately miner does not start with this option
Start from here https://github.com/trexminer/T-Rex/wiki/WebUIYou need to set up a password in order to allow update/modify functionality.
|
|
|
|
trexminer (OP)
Member
Offline
Activity: 283
Merit: 63
|
|
September 28, 2021, 08:43:26 AM |
|
T-Rex 0.23.2
NOTE this is an important update for HiveOS users mining CFX (see "octopus" bug fix below)
Bug fixes: * (octopus) CPU validation incorrectly detects invalid shares after epoch change * (autolykos2) Miner sometimes crashes when "--validate-shares" is enabled * (WebUI) Multiple fixes and improvements: added compact mode with the chart hidden fixed rounding of numbers along chart axes fixed incorrect hashrate/power labels in pop-up hints allow authorisation with existing session id (/trex?sid=xxx - for API users)
|
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 28, 2021, 03:14:10 PM |
|
So, turn off API Readonly mode. Your screenshot clearly shows it's ON.
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 28, 2021, 03:48:49 PM |
|
i tried all different configuration but nothing helping
|
|
|
|
Grendahl
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 28, 2021, 06:56:21 PM |
|
i tried all different configuration but nothing helping Like trexminer already said: Start from here https://github.com/trexminer/T-Rex/wiki/WebUIYou need to set up a password in order to allow update/modify functionality.
|
|
|
|
Anton Ivar
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 28, 2021, 07:27:51 PM |
|
i already first of all set up a password see screen share
|
|
|
|
|