lolMiner 1.64: Fastest Kaspa miner in market

[HeptacoinDEV]

Thanks a lot for adding Heptacoin, Now the coin is more descentralized, anyone can mine. 

[1714206849]

1714206849

[1714206849]

1714206849

[1714206849]

1714206849

[1714206849]

1714206849

[baraday]

Welcome back Lolliedieb, hope your vacation was both fun and restful.

Your version 0.41 has been running on my Ubuntu 18 rig (HEPTA) without fail for days, now. Undervolted two Vega 54's (to 90w) and two RX 570's (to 80w)

Average speed (5s): 15.4 sol/s | 21.2 sol/s | 9.6 sol/s | 10.0 sol/s Total: 56.2 sol/s
Average speed (5s): 22.2 sol/s | 18.8 sol/s | 10.2 sol/s | 11.4 sol/s Total: 62.6 sol/s
Average speed (5s): 16.6 sol/s | 19.6 sol/s | 9.2 sol/s | 11.6 sol/s Total: 57.0 sol/s
Average speed (5s): 17.0 sol/s | 19.4 sol/s | 10.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
Average speed (5s): 16.2 sol/s | 18.2 sol/s | 12.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
---------------------------------------------
Average speed (60s): 17.5 sol/s | 18.5 sol/s | 10.0 sol/s | 10.7 sol/s Total: 56.8 sol/s
---------------------------------------------

I'm looking forward to any performance improvements you can make, though. Good luck!

my one and only 1080ti is making 70 sol/s @250W with EWBF

waiting for improvements on AMD (i have a mixed tahiti/hawaii 10 GPU rig)

[DigDeepMining]

it would seem "SAFE" coin is not supported with this newer version??

[CygnusMinor]

Welcome back Lolliedieb, hope your vacation was both fun and restful.

Your version 0.41 has been running on my Ubuntu 18 rig (HEPTA) without fail for days, now. Undervolted two Vega 54's (to 90w) and two RX 570's (to 80w)

Average speed (5s): 15.4 sol/s | 21.2 sol/s | 9.6 sol/s | 10.0 sol/s Total: 56.2 sol/s
Average speed (5s): 22.2 sol/s | 18.8 sol/s | 10.2 sol/s | 11.4 sol/s Total: 62.6 sol/s
Average speed (5s): 16.6 sol/s | 19.6 sol/s | 9.2 sol/s | 11.6 sol/s Total: 57.0 sol/s
Average speed (5s): 17.0 sol/s | 19.4 sol/s | 10.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
Average speed (5s): 16.2 sol/s | 18.2 sol/s | 12.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
---------------------------------------------
Average speed (60s): 17.5 sol/s | 18.5 sol/s | 10.0 sol/s | 10.7 sol/s Total: 56.8 sol/s
---------------------------------------------

I'm looking forward to any performance improvements you can make, though. Good luck!

my one and only 1080ti is making 70 sol/s @250W with EWBF

waiting for improvements on AMD (i have a mixed tahiti/hawaii 10 GPU rig)

Yup.   Even running at normal voltage:

~$ cat /sys/class/drm/card0/device/hwmon/hwmon0/power1_cap
165000000
~$ cat /sys/class/drm/card2/device/hwmon/hwmon1/power1_cap
90000000
~$ cat /sys/class/drm/card3/device/hwmon/hwmon2/power1_cap
165000000
~$ cat /sys/class/drm/card4/device/hwmon/hwmon3/power1_cap
90000000

Only gets me a avg additional 10 sol/s or so...

Average speed (5s): 21.8 sol/s | 24.8 sol/s | 13.0 sol/s | 12.6 sol/s Total: 72.2 sol/s
Average speed (5s): 23.6 sol/s | 21.8 sol/s | 10.8 sol/s | 12.8 sol/s Total: 69.0 sol/s
Average speed (5s): 23.8 sol/s | 19.4 sol/s | 12.4 sol/s | 13.4 sol/s Total: 69.0 sol/s
Average speed (5s): 19.4 sol/s | 16.6 sol/s | 11.6 sol/s | 12.2 sol/s Total: 59.8 sol/s
Average speed (5s): 19.2 sol/s | 23.4 sol/s | 13.6 sol/s | 14.0 sol/s Total: 70.2 sol/s
---------------------------------------------
Average speed (60s): 19.7 sol/s | 20.4 sol/s | 13.2 sol/s | 13.0 sol/s Total: 66.3 sol/s
---------------------------------------------

...and does a great impression of a kerosene room heater.

[cryptomaxsun]

Post an example of a bat file or configuration file.
It does not start.

[CygnusMinor]

Post an example of a bat file or configuration file.
It does not start.

Here's an example of what I use on Ubuntu. Is this what you're looking for?

$ cat user_config.json
{
        "DEFAULTS" : {
                "DEVICES" : "AUTO",
                "APIPORT" : 0
        },

   "HEPTA_NIBIRU" :
   {
      "COIN" : "HEPTA",
      "POOLS" : [
         {"POOL" : "hepta.nibirupool.com",
          "PORT" : "8138",
          "USER" : "<pymt>.<rigname>",
          "PASS" : "any"}
      ]
   }
}

$ cat run_hepta_nibiru.sh
#!/bin/bash

#################################
## Begin of user-editable part ##
#################################

PROFILE=HEPTA_NIBIRU

export GPU_FORCE_64BIT_PTR=1
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
#################################
##  End of user-editable part  ##
#################################

cd "$(dirname "$0")"
while true
do
  ./lolMiner -profile=$PROFILE $@
  if [ $? -eq 134 ]
  then
    break
  fi
done

[cryptomaxsun]

I understood what the problem is, not all pools support this miner.
Default settings for mining are coming.
I change to this pool, snowgem.zhash.pro there is no start of mining.

Edit.
Hepta , RX 480 4Gb, OS Win 7x64.
Pool Nibiru no support this miner, pool dragonpool.xyz there is a connection, the mining is started.

[CygnusMinor]

I understood what the problem is, not all pools support this miner.
Default settings for mining are coming.
I change to this pool, snowgem.zhash.pro there is no start of mining.

Edit.
Hepta , RX 480 4Gb, OS Win 7x64.
Pool Nibiru no support this miner, pool dragonpool.xyz there is a connection, the mining is started.

For SnowGem I used:
"POOL" : "mining.miningspeed.com",
"PORT" : "3022",

[andrewpuzoff]

I just want you to know I just arrived back from vacation and will start later today to catch comments up here and start working on the next code iteration. Hope to get rid of the minus sign bug and low hashrate on some GPUs asap.

Welcome back Lolliedieb, hope your vacation was both fun and restful.

Your version 0.41 has been running on my Ubuntu 18 rig (HEPTA) without fail for days, now. Undervolted two Vega 54's (to 90w) and two RX 570's (to 80w)

Average speed (5s): 15.4 sol/s | 21.2 sol/s | 9.6 sol/s | 10.0 sol/s Total: 56.2 sol/s
Average speed (5s): 22.2 sol/s | 18.8 sol/s | 10.2 sol/s | 11.4 sol/s Total: 62.6 sol/s
Average speed (5s): 16.6 sol/s | 19.6 sol/s | 9.2 sol/s | 11.6 sol/s Total: 57.0 sol/s
Average speed (5s): 17.0 sol/s | 19.4 sol/s | 10.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
Average speed (5s): 16.2 sol/s | 18.2 sol/s | 12.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
---------------------------------------------
Average speed (60s): 17.5 sol/s | 18.5 sol/s | 10.0 sol/s | 10.7 sol/s Total: 56.8 sol/s
---------------------------------------------

I'm looking forward to any performance improvements you can make, though. Good luck!

I found out something
lolminer 0.41 work fine with Windows 10 and with different drivers
and We have a negative diff + low hashrates on Windows 7 , updating drivers take no effect

switching to other pool takes no effect too = low hashrates! only with Windows7 of course

[Lat_lat]

Also I confirm that it does not work in WIndows 7: it hangs at the moment of the beginning of calculations (1070Ti) ....

What is characteristic, version 0.34 also refuses to start digging, but the system does not hang, just the process ends.

[andrewpuzoff]

Also I confirm that it does not work in WIndows 7: it hangs at the moment of the beginning of calculations (1070Ti) ....

What is characteristic, version 0.34 also refuses to start digging, but the system does not hang, just the process ends.

I'm telling about AMD HD79x0 cards

best result with Windows 10 and latest drivers 3 aug dated, hashrate about 10000
lolminer 0.41 shows 12-18MH under Window 7 but pool reports 6-7 max

PS/ use EWBF for NVidia
my old GTX970 takes about 13MH

[prichina]

i was just working with the settings with the cards, the miner is working perfectly with amd cards (old oners) - minexcoin i withdraw my first statement....thought, little slower on nvidia

[andrewpuzoff]

i was just working with the settings with the cards, the miner is working perfectly with amd cards (old oners) - minexcoin i withdraw my first statement....thought, little slower on nvidia

another day, another fun...
lone HD7970 card PC for BURST mining

Windows 10 just installed with latest AMD driver
lolminer shows 26666 hashrate (WOW!)
...and negative diff on pool again with lower real hashrate of course!

proof https://hkar.ru/V6vc
https://hkar.ru/V6vd

Other PC works fine with Windows 10 , latest adrenalin driver and lolminer0_41

[fluxy12]

I just want you to know I just arrived back from vacation and will start later today to catch comments up here and start working on the next code iteration. Hope to get rid of the minus sign bug and low hashrate on some GPUs asap.

Welcome back Lolliedieb, hope your vacation was both fun and restful.

Your version 0.41 has been running on my Ubuntu 18 rig (HEPTA) without fail for days, now. Undervolted two Vega 54's (to 90w) and two RX 570's (to 80w)

Average speed (5s): 15.4 sol/s | 21.2 sol/s | 9.6 sol/s | 10.0 sol/s Total: 56.2 sol/s
Average speed (5s): 22.2 sol/s | 18.8 sol/s | 10.2 sol/s | 11.4 sol/s Total: 62.6 sol/s
Average speed (5s): 16.6 sol/s | 19.6 sol/s | 9.2 sol/s | 11.6 sol/s Total: 57.0 sol/s
Average speed (5s): 17.0 sol/s | 19.4 sol/s | 10.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
Average speed (5s): 16.2 sol/s | 18.2 sol/s | 12.2 sol/s | 9.6 sol/s Total: 56.2 sol/s
---------------------------------------------
Average speed (60s): 17.5 sol/s | 18.5 sol/s | 10.0 sol/s | 10.7 sol/s Total: 56.8 sol/s
---------------------------------------------

I'm looking forward to any performance improvements you can make, though. Good luck!

You do 10 sol/s with a rx570, i do 29 sol/s with a 1060 gtx EWBF (yes a poor 1060 i buyed 150 bucks). Do you imagine the difference ?

AMD really need to be improve it's just useless right now, i have no doubt the dev is working hard to do it.

[joeykolb]

@andrew , what latest drivers u use for amd?

[andrewpuzoff]

@andrew , what latest drivers u use for amd?

win10-64bit-radeon-software-adrenalin-edition-18.8.1-aug3.exe
for now


I tired 3 different drivers
CATALYST 15.12 (recomended for Claymore) slowly, but It need less energy
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23.exe (recomended by russian telegram comunity)
win10-64bit-radeon-software-adrenalin-edition-18.8.1-aug3.exe (lates from AMD site)

It works fine under Windows 10 on 2 of 3 different PCs

[Lat_lat]

Also I confirm that it does not work in WIndows 7: it hangs at the moment of the beginning of calculations (1070Ti) ....

What is characteristic, version 0.34 also refuses to start digging, but the system does not hang, just the process ends.

I'm telling about AMD HD79x0 cards

best result with Windows 10 and latest drivers 3 aug dated, hashrate about 10000
lolminer 0.41 shows 12-18MH under Window 7 but pool reports 6-7 max

PS/ use EWBF for NVidia
my old GTX970 takes about 13MH

Thank you for the information, the EBBF has done an excellent job.

[JFoxOne]

Users have suggested that we add lolMiner and we did.
lolMiner is now available in our minerstat's mining OS (Linux).

Learn more about it on https://minerstat.com/software/mining-os

[Lolliedieb]

it would seem "SAFE" coin is not supported with this newer version??

I will check back ASAP.

AMD really need to be improve it's just useless right now, i have no doubt the dev is working hard to do it.

Yes I do - its not so easy though.

Currently working on two things: AMD performance on 144.5 and Nvidia false shares / 0.34 often faster then 0.4x on Nvidia for Minexcoin.

Hope to find answer to both within next 10 to 14 days.

[DigDeepMining]

it would seem "SAFE" coin is not supported with this newer version??

I will check back ASAP.

Perfect, thank you