somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 08, 2021, 06:21:09 PM |
|
1.31 is working fine now with 3060 and nicehash under win10. Thanks.
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 08, 2021, 07:21:07 PM |
|
1.31 is working fine now with 3060 and nicehash under win10. Thanks.
To me too....It seems 1.31 has solved the Windows problems !!
|
|
|
|
rampage999
Newbie
Offline
Activity: 45
Merit: 0
|
|
July 09, 2021, 08:23:36 AM |
|
Hi
I got this error message
Device 5 detected as crashed.
So is this GPU 5 or GPU 4?
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 09, 2021, 10:08:31 AM |
|
Hi
I got this error message
Device 5 detected as crashed.
So is this GPU 5 or GPU 4?
It is GPU 6 if you start from 1 or GPU 5 if you start from 0 :-)
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 09, 2021, 07:37:23 PM |
|
There is still some problem with nicehash, cant say about other pools. Connection to server is lost every few minutes. No such problem with T-rex.
Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second
and i think that "trying to connect in 1 second" should be "trying to reconnect in 1 second"...
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 11, 2021, 07:16:49 AM |
|
There is still some problem with nicehash, cant say about other pools. Connection to server is lost every few minutes. No such problem with T-rex.
Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second
and i think that "trying to connect in 1 second" should be "trying to reconnect in 1 second"...
That is normally Internet problems... why that happen with one and not the other ... I will test that pool
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 11, 2021, 01:06:41 PM |
|
i dont think so, just tried one more time and same problem. Trex is working 24/7 and no any problems with disconnects. Tried lolminer with eth on same nicehash server and it is working fine, no disconnects.
+---------------------------------------------------------+ | _ _ __ __ _ _ _____ _ | | | | ___ | | \/ (_)_ __ ___ _ __ / | |___ // | | | | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | |_ \| | | | | | (_) | | | | | | | | | __/ | | |_ ___) | | | | |_|\___/|_|_| |_|_|_| |_|\___|_| |_(_)____/|_| | | | | This software is for mining | | Autolykos V2 | | Ethash, Etchash | | Equihash 144/5, 192/7, 210/9 | | BeamHash III | | ZelHash (EquihashR 125/4/0) | | Cuck(ar)oo 29 | | Cuckaroo 30 CTX | | Cuckatoo 31/32 | | | | | | Made by Lolliedieb, July 2021 | +---------------------------------------------------------+
Setup Miner... OpenCL driver detected. Number of OpenCL supported GPUs: 2 Cuda driver detected. Number of Cuda supported GPUs: 1 Device 0: Name: GeForce RTX 3060 Address: 1:0 Vendor: NVIDIA Corporation Drivers: Cuda Memory: 12288 MByte Active: true (Selected Algorithm: Autolykos V2 (Ergo) 3G Cuda) Device 1: Name: Intel(R) HD Graphics 4600 Address: 4294967295:4294967295 Vendor: Intel(R) Corporation Drivers: OpenCL Memory: 1629 MByte Active: false (not selected)
Connecting to pool... Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 00000000b513e27b Height: 529686 Target: 00000000C367CFE5... Start Mining... Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 000000002c6af81e Height: 529686 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529686 completed (2799 ms) New job received: 000000002c6af81f Height: 529687 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529687 completed (2778 ms) GPU 0: Found a share of difficulty 217.36G GPU 0: Share accepted (22 ms) New job received: 000000002c6af820 Height: 529688 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529688 completed (2800 ms) 15:53:44 Average speed (60s): 100.63 mh/s GPU 0: Found a share of difficulty 7.24G GPU 0: Share accepted (25 ms) Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 000000003ba07a75 Height: 529688 Target: 00000000C367CFE5... GPU 0: Found a share of difficulty 6.64G GPU 0: Share accepted (18 ms)
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 11, 2021, 07:34:27 PM |
|
i dont think so, just tried one more time and same problem. Trex is working 24/7 and no any problems with disconnects. Tried lolminer with eth on same nicehash server and it is working fine, no disconnects.
+---------------------------------------------------------+ | _ _ __ __ _ _ _____ _ | | | | ___ | | \/ (_)_ __ ___ _ __ / | |___ // | | | | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | |_ \| | | | | | (_) | | | | | | | | | __/ | | |_ ___) | | | | |_|\___/|_|_| |_|_|_| |_|\___|_| |_(_)____/|_| | | | | This software is for mining | | Autolykos V2 | | Ethash, Etchash | | Equihash 144/5, 192/7, 210/9 | | BeamHash III | | ZelHash (EquihashR 125/4/0) | | Cuck(ar)oo 29 | | Cuckaroo 30 CTX | | Cuckatoo 31/32 | | | | | | Made by Lolliedieb, July 2021 | +---------------------------------------------------------+
Setup Miner... OpenCL driver detected. Number of OpenCL supported GPUs: 2 Cuda driver detected. Number of Cuda supported GPUs: 1 Device 0: Name: GeForce RTX 3060 Address: 1:0 Vendor: NVIDIA Corporation Drivers: Cuda Memory: 12288 MByte Active: true (Selected Algorithm: Autolykos V2 (Ergo) 3G Cuda) Device 1: Name: Intel(R) HD Graphics 4600 Address: 4294967295:4294967295 Vendor: Intel(R) Corporation Drivers: OpenCL Memory: 1629 MByte Active: false (not selected)
Connecting to pool... Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 00000000b513e27b Height: 529686 Target: 00000000C367CFE5... Start Mining... Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 000000002c6af81e Height: 529686 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529686 completed (2799 ms) New job received: 000000002c6af81f Height: 529687 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529687 completed (2778 ms) GPU 0: Found a share of difficulty 217.36G GPU 0: Share accepted (22 ms) New job received: 000000002c6af820 Height: 529688 Target: 0000000112E0BE82... GPU 0: building Ergo dataset for height 529688 completed (2800 ms) 15:53:44 Average speed (60s): 100.63 mh/s GPU 0: Found a share of difficulty 7.24G GPU 0: Share accepted (25 ms) Lost connection to stratum server autolykos.eu-north.nicehash.com:3390 or server not reachable. Trying to connect in 1 second Connected to autolykos.eu-north.nicehash.com:3390 (TLS disabled) Subscribed to stratum server Authorized worker: xxxxxxxxxxxxxx.3060 New job received: 000000003ba07a75 Height: 529688 Target: 00000000C367CFE5... GPU 0: Found a share of difficulty 6.64G GPU 0: Share accepted (18 ms)
Have you try other nicehash server? Only to try idea...
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 11, 2021, 11:16:48 PM |
|
Lost connection to stratum server autolykos.eu-west.nicehash.com:3390 or server not reachable. Trying to connect in 1 second
No changes...99% of disconnects happen right after "share accepted".
|
|
|
|
Lolliedieb (OP)
|
|
July 12, 2021, 07:43:59 AM |
|
i dont think so, just tried one more time and same problem. Trex is working 24/7 and no any problems with disconnects. Tried lolminer with eth on same nicehash server and it is working fine, no disconnects.
I just checked eu nicehash and there got no "real" single disconnect ... But let me explain: Nicehash on Ergo uses a command {"id":0,"method":"client.reconnect","params":[]}
to tell the miner that it shall reconnect. This happens when your hashrate is supposed to switch to an other buyer, because at the moment with Autolykos this is the only way to give a new extra nonce / to switch destination pool. That said there is a difference between trex and lolMiner: lolMiner at the moment is telling you connection got lost and it will reconnect in 1 second - while trex is silently doing it. Maybe lolMiner should be more precise with the message here, because it is not really a "lost" connection but instead a Nicehash requested reconnect that is needed to re-route your hashrate to the current most biding buyer. So in fact if you see this message on Nicehash: everything is ok! But I will amend the messages printed and will remove the 1 second wait time for this case - I hope that will solve your uncertainty about it
|
Check out lolMiner 1.56, an efficient miner for Ethash, Beam and many Cuckoo-Cycle and Equihash variants for AMD & Nvidia cards at low fees.
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
July 13, 2021, 04:15:24 AM |
|
I just checked eu nicehash and there got no "real" single disconnect ... But let me explain: Nicehash on Ergo uses a command {"id":0,"method":"client.reconnect","params":[]}
to tell the miner that it shall reconnect. This happens when your hashrate is supposed to switch to an other buyer, because at the moment with Autolykos this is the only way to give a new extra nonce / to switch destination pool. That said there is a difference between trex and lolMiner: lolMiner at the moment is telling you connection got lost and it will reconnect in 1 second - while trex is silently doing it. Maybe lolMiner should be more precise with the message here, because it is not really a "lost" connection but instead a Nicehash requested reconnect that is needed to re-route your hashrate to the current most biding buyer. So in fact if you see this message on Nicehash: everything is ok! But I will amend the messages printed and will remove the 1 second wait time for this case - I hope that will solve your uncertainty about it Ok, i see. I'm sure you know better than me how pools are working, so i will just leave it running. Thanks for your explanation.
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
July 14, 2021, 10:26:39 AM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
July 14, 2021, 10:33:38 AM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Did you try the new version 1.31?
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
July 14, 2021, 03:00:54 PM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Did you try the new version 1.31? I'll try but after 2hr of running, its not looking good, Free mem has gone from 6.6 to 6.4.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1792
Merit: 1099
|
|
July 14, 2021, 03:25:11 PM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Install another 8 GB and reboot every 2 weeks Seriously, what are you mining? My RX 470 4 GB video cards mine Ethereum Classic + Zill, on a farm with 4 GB of RAM and there are no problems. Try using an older Hive OS release. I have never had any control over the amount of free RAM
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 14, 2021, 06:10:46 PM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
July 14, 2021, 06:54:36 PM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Install another 8 GB and reboot every 2 weeks. Seriously, what are you mining? My RX 470 4 GB video cards mine Ethereum Classic + Zill, on a farm with 4 GB of RAM and there are no problems. Try using an older Hive OS release. I have never had any control over the amount of free RAM Forgot to say that i'm mining Eth and lolMiner is only miner with this problem, working fine on TRM and PM. (But TRM RX570 starts making invalid shares after 24h, so i have to restart every 24h to avoid it ) Maybe i keep restarting the miner every week, not a big problem. (Current free memory 6.1)
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 14, 2021, 08:37:23 PM |
|
Hi,
I have noticed a problem with lolMiner 1.3, it's eating all the ram slowly. (all 8gb after about one week) After there is no more free ram, computer crashes. Anyone else with same problem? OS: HiveOS 0.6-204@210608 Ram: 8Gb MB: Asrock H81 Pro BTC GPU: 2xRX580,RX570, RX5700 and RX5600XT Amd Driver : 20.20
Install another 8 GB and reboot every 2 weeks. Seriously, what are you mining? My RX 470 4 GB video cards mine Ethereum Classic + Zill, on a farm with 4 GB of RAM and there are no problems. Try using an older Hive OS release. I have never had any control over the amount of free RAM Forgot to say that i'm mining Eth and lolMiner is only miner with this problem, working fine on TRM and PM. (But TRM RX570 starts making invalid shares after 24h, so i have to restart every 24h to avoid it ) Maybe i keep restarting the miner every week, not a big problem. (Current free memory 6.1) It happens on all miners with the 5700 and old HiveOS version... Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-) It was solved on this realease: 0.6-190linux 2021-01-08 LINUX SYSTEM IMAGE New Stable branch Hive Linux client: v0.6-190@201106 Universal boot mode: BIOS | UEFI Linux kernel: v5.4.80-hiveos Drivers version: AMD v20.40, Nvidia: v455.45.01 Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
July 14, 2021, 10:08:55 PM Last edit: July 14, 2021, 10:29:26 PM by DrX |
|
It happens on all miners with the 5700 and old HiveOS version... Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)
It was solved on this realease:
0.6-190linux 2021-01-08 LINUX SYSTEM IMAGE New Stable branch Hive Linux client: v0.6-190@201106 Universal boot mode: BIOS | UEFI Linux kernel: v5.4.80-hiveos Drivers version: AMD v20.40, Nvidia: v455.45.01 Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx
Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner. And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM) (5.8gb now :-) ) But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up. and thanks for advice.
|
|
|
|
maxfunky
|
|
July 15, 2021, 01:45:30 AM |
|
Hi I mine using lolminer (SMOS) zombie mode on a rig with rx 580 4gb and a Vega 64 but the vega never start mining do you know if it is possible to do it on the same rig ?
|
|
|
|
|