newmz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 12:31:25 AM |
|
helo, Is it just me , or has anyone else problems with monero block confirmation? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? since midday i have 20 - 30 blocks that not be confirmed here is only the "first" page: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FqCu7A6J.jpg&t=665&c=8-DEdrFen65FEg) I just saw my confirmed balance go from aproximately 0.7 to approximately 1.25 over about 10 minutes..... what's going on with all the unconfirmed stuff stacking up?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
|
br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 09:57:29 PM |
|
Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 09:59:44 PM |
|
Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.
Just set your auto exchange coin then everything that you mine will go to one single currency. I recommend MultiPoolMiner so that you get the most amount of coins.
|
|
|
|
br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:01:15 PM |
|
Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.
Just set your auto exchange coin then everything that you mine will go to one single currency. Thanks for the reply, but what wallet does it go to, to be exchanged?
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:02:53 PM |
|
Thanks for the reply, but what wallet does it go to, to be exchanged?
Set your wallet address for auto withdraw on the pool that you are exchanging everything to.
|
|
|
|
br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:05:36 PM |
|
Thanks for the reply, but what wallet does it go to, to be exchanged?
Set your wallet address for auto withdraw on the pool that you are exchanging everything to. Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct?
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:09:04 PM |
|
Thanks for the reply, but what wallet does it go to, to be exchanged?
Set your wallet address for auto withdraw on the pool that you are exchanging everything to. Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct? Yes. Remember that the wallet address is just for withdrawing; it doesn't control anything.
|
|
|
|
br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:10:58 PM |
|
Thanks for the reply, but what wallet does it go to, to be exchanged?
Set your wallet address for auto withdraw on the pool that you are exchanging everything to. Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct? Yes, remember that the wallet address is just for withdrawing. It doesn't control anything. Got it! Thanks for your help!
|
|
|
|
induktor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:14:50 PM |
|
Hello Miningpoolhub guys again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.
any ideas why? can you force it, thank you my user is lightman there.
thanks indkt.
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2017, 10:19:57 PM |
|
Hello Miningpoolhub guys again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.
any ideas why? can you force it, thank you my user is lightman there.
thanks indkt.
Sounds like there is something wrong with your account. That's enough Zec; it should have exchanged by now. MiningPoolHub will check it for you when he is back on the forum.
|
|
|
|
UR-Quan
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 03:56:18 AM |
|
Greetings MPH ppl.
1. Didn't use my favorite MPH recently because of LBRY and PASC. Any hope they will be added?
(don't know if it is the right place, maybe should ask the MPOS people, but here goes nothing) 2. The pool-based autoswitching is king. But please make new category including "Ethash, Equihash, Myriad-Groestl, NeoScrypt, Skein, Groestl, Cryptonight, Lyra2RE2, Keccak" for Nvidia - as far as can see theese are the top profit algos. 3. I'd like to autoexchange some coins while stockpiling the others. Can you do distinct settings on site or parse them from password field of connected miner programs? (next one is probably should go to EWBF's thread, but I think your request will have more weight then mine)) 4. For me, EWBF's miner don't disconnect from the pool after it is left with no work regardless of its new "eexit" option.
Thanks in advance!
|
|
|
|
newmz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 07:10:38 AM |
|
Greeting Mining Pool Hub,
firstly, thank you for a great service. I have been using MPH for some of its individual pools for a while now, just experimenting initially but lately I have used your monero pool all the time because it is the only one I can find with a pool server close to me with a decent ping time. I live in Australia and use asia1.monero.miningpoolhub.com:20580. Another good thing here is that you allow the claymore client to make an encrypted connection and thus a lower dev fee. So I am very happy with all that stuff.
I have a question though about the various hash-rate measurements available which can sometimes confuse me a bit.
For example, if I look now at my "workers" tab and add all the individual numbers together it totals 7.6 mh/s but if I then open the "dashboard" tab it shows a figure of 6.71 mh/s then changes to 8.03 mh/s.
I just did the same thing after a few minutes and the "workers" totallled to 8.725 mh.s but the dashboard showed still 8.03 mh/s.
Does this mean that the "worker's data is collected more frequently and the "dashboard" is just a longer average? If I add all of the hash-rates reported by the rigs I use it's something like 8.8 mh/s and if I look at the "graphs" that is appromimately where my graph peaks, but it looks like the average is around 8.3 - 8.6 mh/s. So does this mean that my rigs are offering 8.8 mh/s but you are not able to utilize all that hash rate all the time? I know there are random fluctuations all the time but is there any way for me to improve my settings to raise my average up to what my rigs are reporting?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:06:01 PM |
|
Hello! First off, I really like what you've done with this mining website. I've been mining for about 3 months and I've had great success, and your hard work shows. Do you have an estimate on when you'll be updating the DASH wallet to 12.1? Here's a cool page showing who's switched and who hasn't: https://dashpay.atlassian.net/wiki/display/DOC/Mining+poolsI updated it. Thanks!
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:06:30 PM |
|
It's gonna be one shitty day for zcash today ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) crap!, freaking variance! Sorry ![Cry](https://bitcointalk.org/Smileys/default/cry.gif)
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:09:07 PM |
|
Hi miningpoolhub guys
I don't see credited blocks 59943 and 60015 , it's already bad enough that it took almost 24 hours to find a block, and after that, it has not been credited, what is going on?
can you please investigate? (username: lightman ) thanks indkt.
I can see credits for that block at your account. transaction id 2174026 and 2174868 Seems like pool needed time to calculate because of long block time.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:14:30 PM |
|
I just started using this the other day, and I am fairly comfortable with computers in general, I do know some scripting language from playing text based games or writing triggers for zmud.
I have been mining for a few months, at the onset of monero.
I have a 1050 TI x 5 and +1 970 GTX rig, 1050 TI at work A RX 470 paired with a 6 core AMD waiting for more units I am ordering and finally a 3960x intel which I am looking for a x79 board to do a hybrid CPU/GPU build maybe even make my own personal computer upgrade / miner.
So not a long time vet, but I am not exactly a noob either.
BUT I do want to say its a bit underwelming to me, the instructions which are supplied in the downloads or on website. How you configure things with MPH client for example. sgminer doesnt work at all, ive never used it.. the help file is obnoxious when you load. I tried in a batch, i na config, at the end of the file, tOK, I saw this setting information that SG miner asks for in the claymore readme files. OK. I dont know where it goes it still, a batch file? a command? How do i Make it execute in conjunction with the miner. If i make a config file that seems to read it, but what about all the kernel files. What if I dont want to use that miner and had a different one. I understand the hub switching but I can use others ports, and pools but then what happens to my currency? Also eth dual mining, no decred info on the website or ability to check balances. When you say 17xxx do i really leave that, and the rest is magic.. in the copy and paste when do i change usernames and dont I.
Yeah the whole config files and json files are new to me, and I dont get how I have .1 zclassic on exchange, or what that means. Thats confusing to. Where Ifigured I could come for help and guides its all people posting pools and what not, im not trying to read 100 pages of old data!! The fundamentals of this system or links to similar systems would be handy. If nothing else the miner control is nice, I just can only use it for a couple coins.
I also get big red fails on eth dual, its got to be a config issue at this point but that dual mining has a lot to it.. so in time ill figure it out im sure! but hopefully my coins miined go someplace I can use them. I am using my suprnova account and wallet addie so one can hope.
The struggle is real, but for everyone else it sounds like its pretty good. Thanks for your work on this, I do like it and once i figure out how to use the miner control interface than maybe ill look at the other stuff!
Thank you
I understand your concerns. I too had hard time at starting mining and forgot about it after I learned. I will totally make website much easier than this. I really agree about your suggestion. Thanks.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:15:13 PM |
|
Thanks. Sadly vcash forked accidently. I will compensate after clearing things up.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:17:07 PM |
|
helo, Is it just me , or has anyone else problems with monero block confirmation? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? since midday i have 20 - 30 blocks that not be confirmed here is only the "first" page: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FqCu7A6J.jpg&t=665&c=8-DEdrFen65FEg) I just saw my confirmed balance go from aproximately 0.7 to approximately 1.25 over about 10 minutes..... what's going on with all the unconfirmed stuff stacking up? Just block update script was stuck due to small error. That is why you saw similar numbers at block confirmation count. It's resolved now.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2017, 01:21:26 PM |
|
Hello Miningpoolhub guys again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.
any ideas why? can you force it, thank you my user is lightman there.
thanks indkt.
There was some delay at withdrawal process. I've foudn that it's resolved now. Sorry for late reply. I had really hard time these days because of vcash, zcoin fork issue things.
|
|
|
|
|