GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[Zminer777]

I can not run the miner on the algorithm 96_5. I work with Hive OS. In the logs pops up: algorithm not specified
personalization string not specified
My miner config: --algo 96_5 --server 51.75.146.76 --port 8002 --user XYyeicHByXL5fBc8q67mTZy9MhgZzCbKHS.ASUS1070TI-1 --pass x --pec

You have to specify personalization string "ZcashPoW" ("--pers ZcashPoW")

Code:

./miner --algo 96_5 --pers ZcashPoW --server 51.75.146.76 --port 8002 --user XYyeicHByXL5fBc8q67mTZy9MhgZzCbKHS.ASUS1070TI-1 --pass x

Also you don't need pass "--pec", power efficiency calculator enabled by default

[Zminer777]

Hello. I've got a problem on 1 rig with this miner. The anti-hacking system is triggered and the miner won't start. Win 7 x64 with NO antivirus is installed (defender if off). Is this could be an issue with disabling some system services to free more RAM?
Didn't find a way to disable this anti-hacking system. Could you implement a command-line switch for it?

Hello,

Please install some free antivirus and check your system for viruses(Comodo for example), I guess you have viruses in your system.
Virus may inject gminer memory, that lead to messages about memory injections.

[niask]

Just checked with Dr.Web Cure It, not a single virus found. The rig is really clean, I mean the same software as on the other 2. So not a virus pb 100%.

[Juniormkl]

GMiner v1.14 added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[Zminer777]

GMiner v1.15 available for download

v1.15
+ added Equihash 150,5 algorithm (BEAM)

Performance on stock GPU settings:
Equihash 150,5:
MSI GTX 1080 SEA HAWK EK X 8GB ~10 Sol/s
EVGA GTX 1080 Ti Founders Edition 11GB ~17 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~18 Sol/s

Telegram group: https://t.me/gminer_equihash

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

[Guy Corem]

GMiner v1.15 available for download

v1.15
+ added Equihash 150,5 algorithm (BEAM)

Performance on stock GPU settings:
Equihash 150,5:
MSI GTX 1080 SEA HAWK EK X 8GB ~10 Sol/s
EVGA GTX 1080 Ti Founders Edition 11GB ~17 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~18 Sol/s

Telegram group: https://t.me/gminer_equihash

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A

Approved. Gminer is compatible with BEAM Equihash 150,5 with additional datapath change:
https://docs.beam.mw/Beam_Equihash.pdf

[ElCryptoDinero]

Numbers look good for 150,5!
Did some testing with my TitanXPs.

OC = 70% +220core + 600mem
Hash = ~24 sol/s @ ~167w = 0.14 sol/w

[Zminer777]

Numbers look good for 150,5!
Did some testing with my TitanXPs.

OC = 70% +220core + 600mem
Hash = ~24 sol/s @ ~167w = 0.14 sol/w

Thank you for feedback.
We will release much optimized version within few days.

[ElCryptoDinero]

There is a problem with the GPU ordering.  I targeted my 1080s based on the ordering defined by the software when launching the miner but when comparing the readings to my overclocker, it is running other cards and not the specific cards defined.

*edit - my rig might have dropped a card, restarting to test again.

*edit - Has some OC settings too high and a card dropped out, changing the order.  No problems with the software!

[Zminer777]

There is a problem with the GPU ordering.  I targeted my 1080s based on the ordering defined by the software when launching the miner but when comparing the readings to my overclocker, it is running other cards and not the specific cards defined.

*edit - my rig might have dropped a card, restarting to test again.

GMiner order cards by PCI bus id, it should be same order as in nvidia-smi

[winklebingkle]

What does the bat look like to mine beam for solo miners? Do we use --pass for the api key? When I try to start the miner, it just crashes.

[Zminer777]

What does the bat look like to mine beam for solo miners? Do we use --pass for the api key? When I try to start the miner, it just crashes.

use --user to pass api key.

Code:

miner.exe --algo 150_5 --server beam.sparkpool.com --port 2222 --ssl 1 --user API_KEY

[melpheos]

Getting

Code:

23:27:23 Total Speed: 70 Sol/s Shares Accepted: 110 Rejected: 0 Power: 381W 0.18 Sol/W

6*1070ti, nice improvement if the figures are the same on the pool side. I have to wait one hour or so to confirm

Edit : figures confirmed on pool side, getting around 290 sol/s at pool side with 4*6*1070ti

[sedou]

Any plans on 1060 3gb support for 150,5?

[cryptolad]

Numbers look good for 150,5!
Did some testing with my TitanXPs.

OC = 70% +220core + 600mem
Hash = ~24 sol/s @ ~167w = 0.14 sol/w

That's great.  Have no idea how to OC my Zotacs and EVGAs for this -- 1080ti/1080/1060

Any general guidance appreciated!

[cryptolad]

How do I access the telemetry screen from browser? tia

[onopko9320]

Any plans on 1060 3gb support for 150,5?

This algo use 4300mb on GPU. Its imbossible.

[cryptolad]

How do I access the telemetry screen from browser? tia

'

figured it out... specify api port in command line

--api xxx

the from browser...

localhost:xxx

[ElCryptoDinero]

Getting

Code:

23:27:23 Total Speed: 70 Sol/s Shares Accepted: 110 Rejected: 0 Power: 381W 0.18 Sol/W

6*1070ti, nice improvement if the figures are the same on the pool side. I have to wait one hour or so to confirm

Edit : figures confirmed on pool side, getting around 290 sol/s at pool side with 4*6*1070ti

Those are some really good numbers.  What are you overclocking with?

[FFI2013]

Does anyone have any figures for around about what you should make for appropriate hashrate mining beam I no its early just wondering app numbers