GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[Divinity666]

MiniZ seems to be faster for BTG as well...

[Marvell2]

-cuda_devices 012345

this does not seem to work in comand line to manually pick what devices to run , is theer a new comand

I have two cards that always show "Application Illegal memory access it seems"

i have memory way down on those and core , not overclocking at all any ideas ?

[Dr_Victor]

MiniZ seems to be faster for BTG as well...

Feel free to look at some previous posts.

[nicklittle430]

Since v1.38 i have experienced a 5% drop in hashrate across all cards on 144/5. I have 3 rigs, 17 1080s and 1 1070. All of the cards are experiencing the same reduction. I am running HiveOS - Latest version - Driver 418.43.

Do the newer versions require less OC or is there a known bug?

It's true, on some cards with limited PL miner may show less hashrate, we will fix it in near update, however without limited PL it will show better hashrate than old version.

The regression in performance is still an issue for 1080 and 1070ti cards. getting 67 Sols/1080 with v1.38, and only about 60 Sols with v1.39-1.45

[hogwash.89m]

Also noticed regression in performance on 1080, and as I don't want to increase PL% I will continue to use miniZ miner, which works nicely on 1080 (PL ~130W and --oc1).

[IceMaNoFF]

Also noticed regression in performance on 1080, and as I don't want to increase PL% I will continue to use miniZ miner, which works nicely on 1080 (PL ~130W and --oc1).

how much sol`s on miniZ?
Gminer 65-67 sol/per 1080@130W and 66-70 sol/per 1080@140W.

[Juniormkl]

Gminer 1.45 (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[Zminer777]

Is there any intensity setting for gpu? so that it utilizes 90% and not 100%

What's algorithm/GPUs? Are you check utilization via nvidia-smi?

[Zminer777]

Thieves...

Please stop spam here, all implementations developed by GMiner developer team.

[mk111]

Stop stealing code!

Thieves...

Please stop spam here, all implementations developed by GMiner developer team.

[Zminer777]

hi, the algorithm which this miner supports. I want to surf my pc while mining so if a miner is only utlising 90% of the gpu then its possible to use the desktop or else its too laggy.

use "--intensity 90" to set GPU utilization to 90% for GPU0

[Coinponi]

Hi how to enable a miner to show the diff of the share? if there is no such function, why?

[se2ingu]

I'm only getting 12-14sols mining BEAM on each 1070.  

Do I need to upgrade nvidia drivers?  on 416.34 currently

[stzcze]

OC, MEM, PWR?

[se2ingu]

This is only happening on one rig.  I have them all setup the same. 

core +100
Mem -502
PL 70

all my other rigs get 22-23.5


same drivers same overclock.

[hoista]

I get 22-24 Sols on a 1070 on Beam

Core +50
Mem +500
PL 70

[stzcze]

Core +100
Mem +500
PL 75

I get same... 1070  - 24-25

Try to give mem +500

PS:When you raise the power limit, is it better?

[se2ingu]

No. I tried 100 PL and no change.

Ok this time when I remoted in I was getting 23 2 24 24 so I think I have an issue with GPU 2.  Setting on that GPU were defaulted in afterburner. OC it again and start miner, all back to 12-13.

[tomaroc]

hi,

Algorithm Equihash use Core Memory or Base Memory?
What better OC for nvidia GTX1070 ?

Any --pers for ZELCash (like BgoldPoW or ZERO_PoW) ?

[Coinponi]

Hello , mr Zminer777 How to make your miner ,show share diff ?